Physical principles of digital radiographic imaging system.
- Author:
Jin Woo CHOI
1
;
Won Jin YI
Author Information
1. Department of Oral and Maxillofacial Radiology and Dental Research Institute, School of Dentistry, Seoul National University, Korea.
- Publication Type:Review
- Keywords:
Digital Radiography;
Digital Dental Radiography, Direct;
X-Ray Detectors
- MeSH:
Dental Clinics;
Fees and Charges;
Hand;
Humans;
Light;
Photons;
Radiographic Image Enhancement;
Radiography, Dental, Digital
- From:Korean Journal of Oral and Maxillofacial Radiology
2010;40(4):155-158
- CountryRepublic of Korea
- Language:Korean
-
Abstract:
Digital radiographic systems allow the implementation of a fully digital picture archiving and communication system (PACS), and provide the greater dynamic range of digital detectors with possible reduction of X-ray exposure to the patient. This article reviewed the basic physical principles of digital radiographic imaging system in dental clinics generally. Digital radiography can be divided into computed radiography (CR) and direct radiography (DR). CR systems acquire digital images using phosphor storage plates (PSP) with a separate image readout process. On the other hand, DR systems convert X-rays into electrical charges by means of a direct readout process. DR systems can be further divided into direct and indirect conversion systems depending on the type of X-ray conversion. While a direct conversion requires a photoconductor that converts X-ray photons into electrical charges directly, in an indirect conversion, light-sensitive sensors such as CCD or a flat-panel detector convert visible light, proportional to the incident X-ray energy by a scintillator, into electrical charges. Indirect conversion sensors using CCD or CMOS without lens-coupling are used in intraoral radiography. CR system using PSP is mainly used in extraoral radiographic system and a linear array CCD or CR sensors, in panoramic system. Currently, the digital radiographic system is an important subject in the dental field. Most studies reported that no significant difference in diagnostic performance was found between the digital and conventional systems. To accept advances in technology and utilize benefits provided by the systems, the continuous feedback between doctors and manufacturers is essential.
