Finite element study on the effect of abutment length and material on implant bone interface against dynamic loading.
- Author:
Manish MISHRA
1
;
Shogo OZAWA
;
Tatsuhiko MASUDA
;
Fumi YOSHIOKA
;
Yoshinobu TANAKA
Author Information
- Publication Type:Original Article
- Keywords: Dental implant; Dynamic; Finite element analysis; Resilient material abutment; Polyoxymethylene; Bone-implant interface
- MeSH: Dental Implants; Displacement (Psychology); Finite Element Analysis; Titanium
- From:The Journal of Advanced Prosthodontics 2011;3(3):140-144
- CountryRepublic of Korea
- Language:English
- Abstract: PURPOSE: Finite element study on the effect of abutment length and material on implant bone interface against dynamic loading. MATERIALS AND METHODS: Two dimensional finite element models of cylinderical implant, abutments and bone made by titanium or polyoxymethylene were simulated with the aid of Marc/Mentat software. Each model represented bone, implant and titanium or polyoxymethylene abutment. Model 1: Implant with 3 mm titanium abutment, Model 2: Implant with 2 mm polyoxymethylene resilient material abutment, Model 3: Implant with 3 mm polyoxymethylene resilient material abutment and Model 4: Implant with 4 mm polyoxymethylene resilient material abutment. A vertical load of 11 N was applied with a frequency of 2 cycles/sec. The stress distribution pattern and displacement at the junction of cortical bone and implant was recorded. RESULTS: When Model 2, 3 and 4 are compared with Model 1, they showed narrowing of stress distribution pattern in the cortical bone as the height of the polyoxymethylene resilient material abutment increases. Model 2, 3 and 4 showed slightly less but similar displacement when compared to Model 1. CONCLUSION: Within the limitation of this study, we conclude that introduction of different height resilient material abutment with different heights i.e. 2 mm, 3 mm and 4 mm polyoxymethylene, does not bring about significant change in stress distribution pattern and displacement as compared to 3 mm Ti abutment. Clinically, with the application of resilient material abutment there is no significant change in stress distribution around implant-bone interface.