Color stability of thermochromic pigment in maxillofacial silicone.
- Author:
Rosita KANTOLA
1
;
Lippo V J LASSILA
;
Mimmi TOLVANEN
;
Pekka K VALITTU
Author Information
- Publication Type:Original Article
- Keywords: Maxillofacial silicone; Thermochromic pigment; Color stability
- MeSH: Aging; Darkness; Humidity; Incubators; Maxillofacial Prosthesis; Silicone Elastomers; Skin
- From:The Journal of Advanced Prosthodontics 2013;5(2):75-83
- CountryRepublic of Korea
- Language:English
- Abstract: PURPOSE: Maxillofacial silicone elastomer is usually colored intrinsically with color pigments to match skin colors. The purpose of this study was to investigate the color stability of a maxillofacial silicone elastomer, colored with a thermochromic, color changing pigment. MATERIALS AND METHODS: Disc-shaped maxillofacial silicone specimens were prepared and divided into 3 groups: a conventionally colored control group, one group additionally colored with 0.2 wt% thermochromic pigment , and one group with 0.6 wt% thermochromic pigment. Half of the surface of each specimen was covered with an aluminium foil. All of the specimens were exposed to UV radiation in 6 hour cycles over 46 days. In between the UV exposures, half of the specimens were stored in darkness, at room temperature, and the other half was stored in an incubator, at a humidity of 97% and a temperature of +37degrees C. Color measurements were made with a spectrophotometer and registered according to the CIELAB L*a*b* color model system. The changes in L*, a* and b* values during artificial aging were statistically analyzed by using paired samples t-test and repeated measures ANOVA. P-values <.05 were considered as statistically significant. RESULTS: The UV exposure resulted in visually noticeable and statistically significant color changes in the L*, a* and b* values in both of the test groups containing thermochromic pigment. Storage in the incubator lead to statistically significant color changes in the a* and b* values of the specimens containing thermochromic pigment, compared to those stored at room temperature. CONCLUSION: The specimens containing thermochromic pigment were very sensitive to UV radiation, and the thermochromic pigment is not suitable, as such, to be used in maxillofacial prostheses.
