Effect of solution temperature on the mechanical properties of dual-cure resin cements.
- Author:
En Sook KANG
1
;
Yeong Chan JEON
;
Chang Mo JEONG
;
Jung Bo HUH
;
Mi Jung YUN
;
Yong Hoon KWON
Author Information
- Publication Type:Original Article
- Keywords: Solutiontemperature; Microhardness; Flexural properties; Compressive properties; Dual-cure resin cements
- MeSH: Aged; Androsterone; Collodion; Composite Resins; Compressive Strength; Dentin; Hardness Tests; Humans; Immersion; Light; Resin Cements; Water
- From:The Journal of Advanced Prosthodontics 2013;5(2):133-139
- CountryRepublic of Korea
- Language:English
- Abstract: PURPOSE: This study was to evaluate the effect of the solution temperature on the mechanical properties of dualcure resin cements. MATERIALS AND METHODS: For the study, five dual-cure resin cements were chosen and light cured. To evaluate the effect of temperature on the specimens, the light-cured specimens were immersed in deionized water at three different temperatures (4, 37 and 60degrees C) for 7 days. The control specimens were aged in a 37degrees C dry and dark chamber for 24 hours. The mechanical properties of the light-cured specimens were evaluated using the Vickers hardness test, three-point bending test, and compression test, respectively. Both flexural and compressive properties were evaluated using a universal testing machine. The data were analyzed using a two way ANOVA with Tukey test to perform multiple comparisons (alpha=0.05). RESULTS: After immersion, the specimens showed significantly different microhardness, flexural, and compressive properties compared to the control case regardless of solution temperatures. Depending on the resin brand, the microhardness difference between the top and bottom surfaces ranged approximately 3.3-12.2%. Among the specimens, BisCem and Calibra showed the highest and lowest decrease of flexural strength, respectively. Also, Calibra and Multilink Automix showed the highest and lowest decrease of compressive strength, respectively compared to the control case. CONCLUSION: The examined dual-cure resin cements had compatible flexural and compressive properties with most methacrylate-based composite resins and the underlying dentin regardless of solution temperature. However, the effect of the solution temperature on the mechanical properties was not consistent and depended more on the resin brand.
