Effect of biofilm formation, and biocorrosion on denture base fractures.
- Author:
Cem SAHIN
1
;
Alper ERGIN
;
Simel AYYILDIZ
;
Erdal COSGUN
;
Gulay UZUN
Author Information
- Publication Type:Original Article
- Keywords: Biocorrosion; Microorganisms; Biofilm; Denture base fractures
- MeSH: Acrylic Resins; Biofilms; Denture Bases; Dentures; Diffusion; Hot Temperature; Microscopy, Electron, Scanning; Polymers
- From:The Journal of Advanced Prosthodontics 2013;5(2):140-146
- CountryRepublic of Korea
- Language:English
- Abstract: PURPOSE: The aim of this study was to investigate the destructive effects of biofilm formation and/or biocorrosive activity of 6 different oral microorganisms. MATERIALS AND METHODS: Three different heat polymerized acrylic resins (Ivocap Plus, Lucitone 550, QC 20) were used to prepare three different types of samples. Type "A" samples with "V" type notch was used to measure the fracture strength, "B" type to evaluate the surfaces with scanning electron microscopy and "C" type for quantitative biofilm assay. Development and calculation of biofilm covered surfaces on denture base materials were accomplished by SEM and quantitative biofilm assay. According to normality assumptions ANOVA or Kruskal-Wallis was selected for statistical analysis (alpha=0.05). RESULTS: Significant differences were obtained among the adhesion potential of 6 different microorganisms and there were significant differences among their adhesion onto 3 different denture base materials. Compared to the control groups after contamination with the microorganisms, the three point bending test values of denture base materials decreased significantly (P<.05); microorganisms diffused at least 52% of the denture base surface. The highest median quantitative biofilm value within all the denture base materials was obtained with P. aeruginosa on Lucitone 550. The type of denture base material did not alter the diffusion potential of the microorganisms significantly (P>.05). CONCLUSION: All the tested microorganisms had destructive effect over the structure and composition of the denture base materials.
