Tensile Bond Strength Between Non-Precious Dental Alloy and Veneering Reinforced Composite Resins.
- Author:
Byoung Duk YANG
;
Ju Mi PARK
;
Sok Min KO
;
Geon Gu KANG
- Publication Type:Original Article
- MeSH:
Adhesives;
Aluminum Oxide;
Composite Resins*;
Dental Alloys*;
Sculpture
- From:The Journal of Korean Academy of Prosthodontics
2000;38(4):427-439
- CountryRepublic of Korea
- Language:Korean
-
Abstract:
Recently the 2nd generation laboratory composite resins were introduced. Although the mechanical properties of these composite resins have been improved, there were some disadvantages such as discoloration, low abrasion resistance and debonding between metal and resin. The purpose of this study was to evaluate the tensile bond strength between non-pecious dental alloy(verabond) and four veneering reinforced composite resins: Targis(Ivoclar Co.,U.S.A.), Artglass(Kulzer CO., Gemany). Sculpture(Jeneric Pentron Co., U.S.A.), and Estenia(Kurary Co., Japan). All test metal specimens were polished with #1,000 SiC paper, and sandblasted with 250micrometer aluminum oxide. After then, according to manufacturer's instructions metal adhesive primer and veneering resins were applied. All test specimens were divided into two groups. One group was dried in a desiccator at 25degrees C for 3 days, the other group was subjected to thermal cycling(2,000x) in water(5/55degrees C). Tensile bond strength was measured using Instron Universal Testing machine and the fractured surface was examined under the naked eyes and scanning microscope. Within the limitations imposed in this study, the following conclusions can be drawn: 1. in no-thermal cycling groups, there were no significant differences between Estenia and VMK68 but there were significant differences between Targis, Artglass, Sculpture and VMK68(p<0.05). 2. in no-thermal cycling resin groups, the highest tensile bond strength was observed in Estenis and there were significant differences between Estenia and the other resins(p<0.05). 3. Before and after thermal cycling, there were significant differences in tensile bond strength of Targis and Artglass(p<0.05). The tensile bond strength of Artglass was decreased and that of Targis was increased. 4. in no-thermal cycling groups, Artglass showed mixed fracture modes(95%), but after thermal cycling, Artglass showed adhesive fracture modes(75%).
