A Finite Element Analysis of Biomechanical Stability of Compression Plate Fixation System in according to Existing of Fracture Gap after Bone Fracture Augmentation.
10.12671/jkfs.2010.23.1.83
- Author:
Duk Young JUNG
1
;
Bong Ju KIM
;
Jong Keon OH
Author Information
1. Senior Products Industrial Center, Busan Techno-park, Korea.
- Publication Type:Original Article
- Keywords:
Bone fracture;
LC-DCP;
Fracture gap;
Biomechanical stability;
FEM
- MeSH:
Finite Element Analysis;
Fractures, Bone;
Humans;
Neck;
Walking
- From:Journal of the Korean Fracture Society
2010;23(1):83-89
- CountryRepublic of Korea
- Language:Korean
-
Abstract:
PURPOSE: This study using the finite element analysis (FEA) focused on evaluating the biomechanical stability of the LC-DCP in accordance with existing of the fracture gap at the facture site after bone fracture augmentation. MATERIALS AND METHODS: For FEM analysis, total eleven types with different fracture models considering clinical fracture cases were constructed according to the fracture gap sizes (0, 1, 4 mm)/widths (0, 25, 50, 75, 100%). Limited contact dynamic compression plate (LC-DCP) fixation system was used in this FEM analysis, and three types of load were applied to the bone-plate fixation system: compressive, torsional, bending load. RESULTS: The results in FEM analysis showed that the 1, 4 mm fracture gap sizes and 75% or more fracture gap widths increased considerably the peak von Mises stress (PVMS) both the plate and the screw under all loading conditions. PVMS were concentrated on the center of the LC-DCP bone-plate, and around the necks of screws. CONCLUSION: Based on the our findings, we recommend at least 50% contact of the fracture faces in a fracture surgery using the compression bone-plate system. Moreover, if x-ray observation after surgery finds 100% fracture gap or 50% or more fracture gap width, supplementary measures to improve biomechanical stability must be taken, such as restriction of walking of the patient or plastering.
