Comparison of frictional forces between aesthetic orthodontic coated wires and self-ligation brackets.
10.4041/kjod.2014.44.4.157
- Author:
Yunmi KIM
1
;
Jung Yul CHA
;
Chung Ju HWANG
;
Hyung Seog YU
;
Seon Gun TAHK
Author Information
1. Department of Orthodontics, College of Dentistry, Yonsei University, Seoul, Korea. yumichael@yuhs.ac
- Publication Type:Original Article
- Keywords:
Wire;
Frictional forces;
Bracket
- MeSH:
Bicuspid;
Esthetics;
Friction*;
Mouth;
Nickel;
Stainless Steel;
Titanium
- From:The Korean Journal of Orthodontics
2014;44(4):157-167
- CountryRepublic of Korea
- Language:English
-
Abstract:
OBJECTIVE: The purpose of this study was to evaluate the clinical efficacy of polymer- and rhodium-coated wires compared to uncoated wires by measuring the frictional forces using self-ligation brackets. METHODS: 0.016-inch nickel titanium (NiTi) wires and 0.017 x 0.025-inch stainless steel (SS) wires were used, and the angulations between the brackets and wires were set to 0degrees, 5degrees, and 10degrees. Upper maxillary premolar brackets (Clippy-C(R)) with a 0.022-inch slot were selected for the study and a tensile test was performed with a crosshead speed of 5 mm/min. The maximum static frictional forces and kinetic frictional forces were recorded and compared. RESULTS: The maximum static frictional forces and the kinetic frictional forces of coated wires were equal to or higher than those of the uncoated wires (p < 0.05). The maximum static frictional forces of rhodium-coated wires were significantly higher than those of polymer-coated wires when the angulations between the brackets and wires were set to (i) 5degrees in the 0.016-inch NiTi wires and (ii) all angulations in the 0.017 x 0.025-inch SS wires (p < 0.05). The kinetic frictional forces of rhodium-coated wires were higher than those of polymer-coated wires, except when the angulations were set to 0degrees in the 0.016-inch NiTi wires (p < 0.05). CONCLUSIONS: Although the frictional forces of the coated wires with regards to aesthetics were equal to or greater than those of the uncoated wires, a study under similar conditions regarding the oral cavity is needed in order to establish the clinical implications.
