Research and application analysis of technical support strategy of large medical equipment based on the perspective of metrological safety
10.3969/j.issn.1672-8270.2024.11.023
- VernacularTitle:基于计量安全视角的大型医疗设备技术保障策略研究
- Author:
Pengfei WANG
1
;
Zhidong SUN
;
Xiaochen ZHAO
;
Liwen CHI
;
Yangyang LI
Author Information
1. 中国人民解放军联勤保障部队第九六○医院医学工程科 济南 250031
- Keywords:
Metrological safety;
Technical support;
Diagnosis and treatment area;
Evaluation parameter
- From:
China Medical Equipment
2024;21(11):121-125,136
- CountryChina
- Language:Chinese
-
Abstract:
Objective:To construct a metrological safety evaluation model for large medical equipment based on the perspective of metrological safety,and to explore its application value in the management of large medical equipment.Methods:According to the different safety risk sources,the diagnosis and treatment area of large medical equipment was divided into five types:light source,electricity,water,radiation and information.The metrological safety assessment indicators were empowered by combining subjective and objective methods,and engineering support strategies were developed according to the metrological safety levels and safety change trends.A total of 48 large medical equipment in clinical use in The 960th Hospital of PLA Joint Logistic Support Force from 2020 to 2023 were selected.The 42 sets of equipment used during 2020 to 2021 adopted the conventional fault maintenance support mode(referred to as the conventional support mode),and the 43 sets of equipment used from 2022-2023(including 37 in conventional mode and 6 newly added)adopted the metrology safety technical support mode(referred to as metrology safety support mode).The metrology safety management ability score,metrological inspection qualification levels and metrological safety management effects of large medical equipment were compared between the two management modes.Results:The evaluation scores of theoretical knowledge,safety awareness,practical operation and emergency level indicators of large medical equipment use management personnel of the metrology safety support model were(17.39±1.38)points,(17.87±1.08)points,(27.68±1.45)points and(27.96±1.24)points,respectively,which were higher than those of the conventional support mode,the difference was statistically significant(t=4.234,4.371,5.832,3.764,P＜0.05).The average metrological inspection qualified rates(％)of medical imaging equipment,life support equipment,clinical laboratory equipment,operating room equipment and other equipment using the metrology safety support mode were(95.19±2.56)％,(95.56±1.79)％,(94.64±2.42)％,(96.20±2.01)％and(93.46±2.22)％,respectively,which were higher than those of the conventional support mode,the difference was statistically significant(t=3.846,2.809,2.405,2.492,2.742,P＜0.05).The proportion of large medical equipment rated as high safety level and low safety level in the metrological safety support model were 67.44％(29/43)and 4.65％(2/43),respectively,the proportion of high safety level was higher than that in the conventional support mode,and the proportion of low safety level was lower than that in the conventional support mode,the difference was statistically significant(x2=4.261,7.085,P＜0.05).Conclusion:The large medical equipment metrological safety support mode based on the safety perspective can improve the safety management ability of personnel related to equipment use and management,improve the operation quality and performance level of equipment,increase the proportion of high-safety level metrology safety of large medical equipment,and reduce the proportion of low-safety level.
