THREE-DIMENSIONAL FINI6E ELEMENT ANALYSIS OF THE ENDOSSEOUS IMPLANT DESIGNS.
- Author:
Hyun Young KEUN
1
;
Jong Jin KWON
Author Information
1. Major in Dentistry, Department of Medical Science, Graduate School, Korea University, Korea.
- Publication Type:Original Article
- Keywords:
Endosseous implant designs;
3-Dimensional finite element analysis;
Cylinder type implant;
Screw type implant
- MeSH:
Bite Force;
Dental Implants;
Radius
- From:The Journal of Korean Academy of Prosthodontics
1997;35(1):181-210
- CountryRepublic of Korea
- Language:Korean
-
Abstract:
The stress distribution generated in the surrounding bone was calculated and compared for various geometry of the dental implants by means of the finite element methods. The models were designed to represent the screw type endosseous implants (varing the size, shape, direction of the screw thread and the angle of the body) with supporting bone and the cylinder type endosseous implants (varing the lower portion-Round type, tapered type) with supporting bone. Static mean bite forces were applied 100N vertically and 25N horizontally on the center of the implant and three dimensional finite analysis was undertaken using software ANSYS 5.1 Version. The result demonstrated that different implant shape leads to significant variations in stress distribution in the bone. In the case of variation of the screw size, direction and shape the implant model with normally directional and triangular screw implied lower stress than with upper directional or lower directional and quadrangular screw but among models a different screw size, within a variation of 0.2mm there was no meaningful difference in maximum stress. In the case of variation of angle of body the straight implied lower stress than the tapered. As a result of analysis of cylinder type, the implants with larger radius of curvature of the round form and larger diameter of the tapered form implied lower stress.
