Measurement and analysis of hand-transmitted vibration of vibration tools in workplace for automobile casting and assembly
10.3760/cma.j.issn.1001-9391.2016.02.007
- VernacularTitle:汽车铸造及装配作业场所振动工具手传振动测量和分析
- Author:
Xiaoshuang XIE
1
;
Cheng QI
;
Xieyi DU
;
Weiwei SHI
;
Min ZHANG
Author Information
1. 中国疾病预防控制中心职业卫生与中毒控制所
- Keywords:
Vibration;
Hand-transmitted vibration;
Automobile casting and assembly;
Hand tool
- From:
Chinese Journal of Industrial Hygiene and Occupational Diseases
2016;34(2):107-110
- CountryChina
- Language:Chinese
-
Abstract:
Objective To investigate the features of hand-transmitted vibration of common vibration tools in the workplace for automobile casting and assembly.Methods From September to October,2014,measurement and spectral analysis were performed for 16 typical hand tools (including percussion drill,pneumatic wrench,grinding machine,internal grinder,and arc welding machine) in 6 workplaces for automobile casting and assembly according to ISO 5349-1-2001 Mechanical vibration-Measurement and evaluation of human exposure to hand-transmitted vibration-part 1:General requirements and ISO 5349-2-2001 Mechanical vibration-Measurement and evaluation of human exposure to hand-transmitted vibration-Part 2:Practical guidance for measurement in the workplace.Results The vibration acceleration waveforms of shearing machine,arc welding machine,and pneumatic wrench were mainly impact wave and random wave,while those of internal grinder,angle grinder,percussion drill,and grinding machine were mainly long-and short-period waves.The daily exposure duration to vibration of electric wrench,pneumatic wrench,shearing machine,percussion drill,and internal grinder was about 150 minutes,while that of plasma cutting machine,angle grinder,grinding machine,bench grinder,and arc welding machine was about 400 minutes.The range of vibration total value (ahw) was as follows:pneumatic wrench 0.30～11.04 m/s2,grinding wheel 1.61 ～8.97 m/s2,internal grinder 1.46～8.70 m/s2,percussion drill 11.10～14.50 m/s2,and arc welding machine 0.21～2.18 m/s2.The workers engaged in cleaning had the longest daily exposure duration to vibration,and the effective value of 8-hour energy-equivalent frequency-weighted acceleration for them[A (8)] was 8.03 m/s2,while this value for workers engaged in assembly was 4.78 m/s2.The frequency spectrogram with an 1/3-time frequency interval showed that grinding machine,angle grinder,and percussion drill had a high vibration acceleration,and the vibration limit curve was recommended for those with a frequency higher than 400 min/d.Conclusion The workers who are engaged in cleaning,grinding,and a few positions of assembly and use grinding machine,angle grinder,internal grinder,and percussion drill are exposed to vibrations with a high vibration acceleration and at a high position of the frequency spectrum.The hand-transmitted vibration in the positions of cutting,polishing,and cleaning in automobile casting has great harm,and the harm caused by pneumatic wrench in automobile assembly should be taken seriously.
