Mechanism of the dentino-enamel junction on the resist-crack propagation of human teeth by the finite element method

VernacularTitle:有限元法初步探讨釉牙本质界对裂纹的阻断机制
Author: Jingjing ZHENG ¹ ; Tiezhou HOU ; Hong TAO ; Xueyan GUO ; Cui WU
Author Information

1. 西安交通大学附属口腔医院牙体牙髓病科
Keywords: dentino-enamel junction; finite element; stress intensity factor; crack propagation
From: West China Journal of Stomatology 2014;(5):464-466
CountryChina
Language:Chinese
Abstract: Objective This study aims to identify the crack tip stress intensity factor of the propagation process, crack propagation path, and the changes in the shape of the crack tip by the finite element method. Methods The finite element model of dentino-enamel junction was established with ANSYS software, and the length of the initial crack in the single edge was set to 0.1 mm. The lower end of the sample was fixed. The tensile load of 1 MPa with frequency of 5 Hz was applied to the upper end. The stress intensity factor, deflection angle, and changes in the shape of the crack tip in the crack propagation were calculated by ANSYS. Results The stress intensity factor suddenly and continuously decreased in dentino-enamel junction as the crack extended. A large skewed angle appeared, and the stress on crack tip was reduced. Conclusion The dentino-enamel junction on human teeth may resist crack propagation through stress reduction.