Feasibility of a novel augmented reality overlay for cervical screw placement in phantom spine models
- Author:
Joshua OLEXA
1
;
Brian SHEAR
;
Nathan HAN
;
Ashish SHARMA
;
Annie TRANG
;
Kevin KIM
;
Gary SCHWARTZBAUER
;
Steven LUDWIG
;
Charles SANSUR
Author Information
- Publication Type:Clinical Study
- From:Asian Spine Journal 2024;18(3):372-379
- CountryRepublic of Korea
- Language:English
-
Abstract:
Methods:AR technology that uses a fiducial-less registration system was tested in a preclinical cervical spine phantom model study for accuracy during spinal screw placement. A three-dimensional reconstruction of the spine along with trajectory lines was superimposed onto the phantom model using an AR headset. Participants used the AR system to guide screw placement, and post-instrumentation scans were compared for accuracy assessment.
Results:Twelve cervical screws were placed under AR guidance. All screws were placed in an acceptable anatomic position. The average distance error for the insertion point was 2.73±0.55 mm, whereas that for the endpoint was 2.71±0.69 mm. The average trajectory angle error for all insertions was 2.69°±0.59°.
Conclusions:This feasibility study describes a novel registration approach that superimposes spinal anatomy and trajectories onto the surgeon’s real-world view of the spine. These results demonstrate reasonable accuracy in the preclinical model. The results of this study demonstrate that this technology can assist with accurate screw placement. Further investigation using cadaveric and clinical models is warranted.
