Effect of prosthetic joint line installation height errors on insert wear in unicompartmental knee arthroplasty.
10.7507/1001-5515.202307051
- Author:
Shoulin XIONG
1
;
Yafei QU
1
;
Jiaxuan REN
1
;
Jing ZHANG
1
;
Hui LI
2
;
Zhenxian CHEN
1
Author Information
1. School of Construction Machinery, Chang'an University, Xi'an 710064, P. R. China.
2. Honghui Hospital, Xi'an Jiaotong University, Xi'an 710054, P. R. China.
- Publication Type:Journal Article
- Keywords:
Contact mechanics;
Joint line;
Unicompartmental knee arthroplasty;
Wear prediction
- MeSH:
Humans;
Arthroplasty, Replacement, Knee;
Knee Joint;
Knee Prosthesis;
Mechanical Phenomena;
Polyethylene;
Osteoarthritis, Knee/surgery*;
Tibia/surgery*;
Biomechanical Phenomena
- From:
Journal of Biomedical Engineering
2023;40(6):1192-1199
- CountryChina
- Language:Chinese
-
Abstract:
The clinical performance and failure issues are significantly influenced by prosthetic malposition in unicompartmental knee arthroplasty (UKA). Uncertainty exists about the impact of the prosthetic joint line height in UKA on tibial insert wear. In this study, we combined the UKA musculoskeletal multibody dynamics model, finite element model and wear model to investigate the effects of seven joint line height cases of fixed UKA implant on postoperative insert contact mechanics, cumulative sliding distance, linear wear depth and volumetric wear. As the elevation of the joint line height in UKA, the medial contact force and the joint anterior-posterior translation during swing phase were increased, and further the maximum von Mises stress, contact stress, linear wear depth, cumulative sliding distance, and the volumetric wear also were increased. Furthermore, the wear area of the insert gradually shifted from the middle region to the rear. Compared to 0 mm joint line height, the maximum linear wear depth and volumetric wear were decreased by 7.9% and 6.8% at -2 mm joint line height, and by 23.7% and 20.6% at -6 mm joint line height, the maximum linear wear depth and volumetric wear increased by 10.7% and 5.9% at +2 mm joint line height, and by 24.1% and 35.7% at +6 mm joint line height, respectively. UKA prosthetic joint line installation errors can significantly affect the wear life of the polyethylene inserted articular surfaces. Therefore, it is conservatively recommended that clinicians limit intraoperative UKA joint line height errors to -2-+2 mm.