Application of micro-bolus injection and piezoelectric sensors to improve the safety of radiopharmaceuticals bolus injection.
10.7507/1001-5515.202305017
- Author:
Jin LI
1
;
Yan WANG
1
;
Jianxiong MA
1
;
Xinxin PANG
2
;
Wei ZHOU
2
;
Cungui TIAN
2
;
Guohui YANG
2
;
Na ZHAO
2
Author Information
1. Tianjin Hospital, Tianjin University, Tianjin 300211, P. R. China.
2. CNNC High Energy Equipment (Tianjin) Co., Ltd., Tianjin 300300, P. R. China.
- Publication Type:Journal Article
- Keywords:
Automatic bolus injection;
Micro-bolus injection;
Piezoelectric sensor
- MeSH:
Animals;
Rats;
Radiopharmaceuticals/administration & dosage*
- From:
Journal of Biomedical Engineering
2023;40(5):982-988
- CountryChina
- Language:Chinese
-
Abstract:
Radiopharmaceutical dynamic imaging typically necessitates intravenous injection via the bolus method. However, manual bolus injection carries the risk of handling errors as well as radiological injuries. Hence, there is potential for automated injection devices to replace manual injection methods. In this study, the effect of micro-bolus pulse injection technology was compared and verified by radioactive experiments using a programmable injection pump, and the overall bubble recognition experiment and rat tail vein simulation injection verification were performed using the piezoelectric sensor preloading method. The results showed that at the same injection peak speed, the effective flushing volume of micro-bolus pulse flushing (about 83 μL/pulse) was 49.65% lower than that of uniform injection and 25.77% lower than that of manual flushing. In order to avoid the dilution effect of long pipe on the volume of liquid, the use of piezoelectric sensor for sealing preloading detection could accurately predict the bubbles of more than 100 μL in the syringe. In the simulated injection experiment of rat tail vein, when the needle was placed in different tissues by preloading 100 μL normal saline, the piezoelectric sensor fed back a large difference in pressure attenuation rate within one second, which was 2.78% in muscle, 17.28% in subcutaneous and 54.71% in vein. Micro-bolus pulse injection method and piezoelectric sensor sealing preloading method have application potential in improving the safety of radiopharmaceutical automatic bolus injection.
