OBJECTIVEThe aim of this study is to analyze the three-dimensional crystal structure of SMU.2055 protein, a putative acetyltransferase from the major caries pathogen Streptococcus mutans (S. mutans). The design and selection of the structure-based small molecule inhibitors are also studied.

METHODSThe three-dimensional crystal structure of SMU.2055 protein was obtained by structural genomics research methods of gene cloning and expression, protein purification with Ni²⁺-chelating affinity chromatography, crystal screening, and X-ray diffraction data collection. An inhibitor virtual model matching with its target protein structure was set up using computer-aided drug design methods, virtual screening and fine docking, and Libdock and Autodock procedures.

RESULTSThe crystal of SMU.2055 protein was obtained, and its three-dimensional crystal structure was analyzed. This crystal was diffracted to a resolution of 0.23 nm. It belongs to orthorhombic space group C222(1), with unit cell parameters of a = 9.20 nm, b = 9.46 nm, and c = 19.39 nm. The asymmetric unit contained four molecules, with a solvent content of 56.7%. Moreover, five small molecule compounds, whose structure matched with that of the target protein in high degree, were designed and selected.

CONCLUSIONProtein crystallography research of S. mutans SMU.2055 helps to understand the structures and functions of proteins from S. mutans at the atomic level. These five compounds may be considered as effective inhibitors to SMU.2055. The virtual model of small molecule inhibitors we built will lay a foundation to the anticaries research based on the crystal structure of proteins.

Bacterial Proteins ; chemistry ; Cloning, Molecular ; Crystallization ; Crystallography, X-Ray ; Dental Caries ; Humans ; Streptococcus mutans ; chemistry ; X-Ray Diffraction

Using chrysin as a leading compound, intermediate 5, 7-dihydroxy-6, 8-bis (hydroxymethyl) flavone (1) was synthesized by hydroxymethylation. The intermediate reacted with different alcohols to afford 5, 7-dihydroxy-6, 8-bis ( methoxymethyl) flavone (2), 6, 8-bis (ethoxymethyl) -5, 7dihydroxyflavone (3), 6, 8-bis-(butoxymethyl)-5, 7-dihydroxyflavone (4), 6, 8-bis (pentyloxymethyl) -5,7-dihydroxy flavone (5) and 6, 8-bis-(ethoxymethyl) -5-hydroxy-7-methoxyflavone (6). These compounds were characterized by IR, 1H NMR, 13C NMR and element analysis. The crystal structure of 6 was determined by X-ray crystal diffraction. The interaction of the derivatives with CT-DNA was studied by fluorescent spectroscopy. According to the Stern-Volmer equation, the quenching constants of the compounds 1 - 4 were measured, separately, they were K(q1) = 9.71 x 10(3) L x mol(-1), K(q2) = 2.25 x 10(4) L x mol(-1), K(q3) = 1.03 x 10(4) L x mol(-1) and K(q4) = 7.96 x 10(3) L x mol(-1). Compounds 1-4 showed higher binding affinity with DNA than chrysin did. The results provided the experimental basis for developing a more effective flavonoid and worthing further thoroughly study.
Animals ; Crystallography ; DNA ; metabolism ; Drug Interactions ; Flavones ; chemical synthesis ; chemistry ; Flavonoids ; chemical synthesis ; chemistry ; metabolism ; Magnetic Resonance Spectroscopy ; Molecular Structure ; X-Ray Diffraction

Transforming technology for semi-synthesized isocorydione from the natural product ofisocorydine was studied. The factors affecting on the reaction yield were investigated. UV spectrophotometry was used to indicate the semi-synthesized yield of isocorydione. The optimum reaction conditions were determined as following: reacting for 12 h in the solution of sodium dihydrogen phosphate at pH 10, the temperature was 25 degrees C and the ratio of isocorydine to Fremy's radical was 1 : 2. Under the optimum conditions, the yield could reach up to 50.0%. The molecular structure of isocorydione was elucidated by X-ray single-crystal diffraction analysis for the first time.
Antineoplastic Agents, Phytogenic ; chemical synthesis ; chemistry ; isolation & purification ; Aporphines ; chemical synthesis ; chemistry ; isolation & purification ; Crystallography, X-Ray ; Hydrogen-Ion Concentration ; Molecular Structure ; Nitroso Compounds ; Oxidation-Reduction ; Papaveraceae ; chemistry ; Plants, Medicinal ; chemistry ; Spectrophotometry, Ultraviolet ; Temperature ; X-Ray Diffraction

Algorithms ; Carrier Proteins ; chemistry ; Crystallography, X-Ray ; Humans ; Magnetic Resonance Spectroscopy ; Molecular Dynamics Simulation ; Nuclear Proteins ; chemistry ; Principal Component Analysis ; Protein Structure, Tertiary ; Proteins ; chemistry ; Scattering, Small Angle ; X-Ray Diffraction ; methods

PURPOSE: This study investigated the influence of surface conditioning procedures and repeated firings on monoclinic content and strength of zirconia before cementation. MATERIALS AND METHODS: Sintered bar-shaped zirconia specimens were subjected to no surface treatment (control), air abrasion, or grinding (n=21). Their roughness was evaluated using a profilometer, and microscope analysis was performed on one specimen of each group. Then, 2 or 10 repeated firings (n=10) were executed, the monoclinic content of specimens was analyzed by X-ray diffraction, and a three-point flexural strength test was performed. Surface roughness values were compared using one-way analysis of variance (ANOVA) and Tukey honestly significant difference (HSD) tests, the monoclinic content values were tested using Kruskal-Wallis and Mann-Whitney U tests, and the flexural strength values were tested using two-way ANOVA and Tukey HSD tests (P=.05). Spearman's correlation test was performed to define relationships among measured parameters. RESULTS: Surface-treated specimens were rougher than untreated specimens and had a higher monoclinic content (P<.005), and the relationship between roughness and monoclinic content was significant (P<.000). Neither surface treatment nor firing significantly affected the flexural strength, but Weibull analysis showed that for the air-abraded samples the characteristic strength was significantly lower after the 10th firing than after the 2nd firing. CONCLUSION: After firing, a negligible amount of monoclinic content remained on the zirconia surfaces, and rougher surfaces had higher monoclinic contents than untreated surfaces. Multiple firings could be performed if necessary, but the fracture probability could increase after multiple firings for rougher surfaces.
Cementation ; Ceramics ; Fires* ; X-Ray Diffraction

PURPOSE: The purpose of the present study was to evaluate the effect of thermocycling and mechanical loading on the biaxial flexural strength and the phase transformation of one Ce-TZP/Al2O3 and two Y-TZP core materials. MATERIALS AND METHODS: Thirty disc-shaped specimens were obtained from each material. The specimens were randomly divided into three groups (control, thermocycled, and mechanically loaded). Thermocycling was subjected in distilled water for 10000 cycles. Mechanical loading was subjected with 200 N loads at a frequency of 2 Hz for 100000 times. The mean biaxial flexural strength and phase transformation of the specimens were tested. The Weibull modulus, characteristic strength, 10%, 5% and 1% probabilities of failure were calculated using the biaxial flexural strength data. RESULTS: The characteristic strengths of Ce-TZP/Al2O3 specimens were significantly higher in all groups compared with the other tested materials (P<.001). Statistical results of X-ray diffraction showed that thermocycling and mechanical loading did not affect the monoclinic phase content of the materials. According to Raman spectroscopy results, at the same point and the same material, mechanical loading significantly affected the phase fraction of all materials (P<.05). CONCLUSION: It was concluded that thermocycling and mechanical loading did not show negative effect on the mean biaxial strength of the tested materials.
Spectrum Analysis, Raman ; Water ; X-Ray Diffraction

OBJECTIVETo construct four different micro- and nano-phase titanium film models and investigate the characteristics of their surface micro-topography.

METHODSFour different titanium films were prepared on commercial titanium discs, by direct current magnetron sputtering, at ambient, 100, 250, 380 degrees C substrate temperature, respectively. Their surface topography and crystal sizes were investigated using atomic force microscope (AFM) and X-ray diffraction (XRD). The size of granule and surface roughness in different group was calculated and compared.

RESULTSAll samples were covered by a thin film consisting of dense round or ovaloid granules. The granules and crystals was growing as the substrate temperature increasing. The Ti substrate had greater effect on the surface topography of film compared with Si substrate. This kind of complex topography caused the surface roughness of Ti substrate group decreased as the granules growing.

CONCLUSIONIn our study, four different micro- and nano-phase titanium film models were constructed for our coming investigation of their topographical influence on biological reaction of proteins and cells. Basic data on surface features was obtained for next in vitro and in vivo experiment.

Surface Properties ; Titanium ; X-Ray Diffraction

The technique of liquisolid compress is a new technique developed in 1990s, which was considered to be the most promising technique to improve the dissolution of water-insoluble drugs. In this article, tanshinone II(A) and the extracts of the ester-solubility fractions were chosen as the model drugs to evaluate the effects of the liquisolid technique for enhancement of dissolution properties of tanshinone II(A). Several liquisolid tablets (LS) formulations containing different dosage of drugs and various liquid vehicle were pre-pared and for all the formulations, microcrystalline cellulose and silica were chosen as the carrier and coating materials to evaluate their flow properties, such as angle of repose, Carr's compressibility index and Hausner's ratio. The interaction between drug and excipients in prepared LS compacts were studied by differential scanning calorimetry(DSC) and X-ray powder diffraction (XRPD). The dissolution curves of tanshinone II(A) from liquisolid compacts were investigated to determine the technique's effect in improving the dissolution of tanshinone II(A) and its impacting factors. According to the results, the dissolution increased with the rise in the dissolution of the liquid-phase solvent. The R-value and drug dosage can significantly affect the drug release, but with less impact on active fractions. This indicated that liquisolid technique is a promising alternative for improvement of dissolution property of water-soluble drugs, and can make a synergistic effect with other ester-soluble constituents and bettern improve the release of tanshinone II(A). Therefore, the technique of liquisolid compress will have a better development prospect in traditional Chinese medicines.
Calorimetry, Differential Scanning ; Diterpenes, Abietane ; chemistry ; Solubility ; X-Ray Diffraction

OBJECTIVETo investigate the structure, mechanical and low temperature aging properties of colored dental zirconia ceramics.

METHODS5 graded colored dental zirconia ceramics were made by adding colorants and their combinations into a 3Y-TZP (tetragonal zirconia stabilized by 3mol% yttrium) powder, the green body were compacted at 200 MPa, pre-sinter at 1,050 degrees C and maintained for 2 h, then densely sintered at 1,500 degrees C for 2 h. Specimens were cut from each of the 5 graded colored blocks. Physical, mechanical properties as well as chemical stability were tested, microstructure were observed, crystalline phase were identified by X-ray diffraction (XRD), aging properties were assessed by measurement of the relative content of monoclinic phase and bending strength testing.

RESULTSThe overall density of colored zirconia ceramics was over 99.7%, linear shrinkage was about 20%, while thermal expansion coefficient was about 11 x 10(-6) x degrees C(-1), the crystalline phase was tetragonal, bending strength was over 900 MPa which was slightly lowered than that of the uncolored zirconia, fracture toughness was slightly higher. Good chemical stability in acetic acid was observed. After aging treatment, tetragonal-to-monoclinic phase transformation was detected up to 40%, while bending strength was not significantly degraded.

CONCLUSIONThe results showed that colored 3Y-TZP ceramics presented good mechanical properties even after aging treatments, and was suitable for dental clinical use.

Ceramics ; Materials Testing ; X-Ray Diffraction ; Yttrium ; Zirconium

PURPOSE: The purpose of this study was to compare the optical properties of pre-colored dental monolithic zirconia ceramics of various thicknesses sintered in a microwave and those in a conventional furnace. MATERIALS AND METHODS: A2-shade of pre-colored monolithic zirconia ceramic specimens (22.0 mm × 22.0 mm) in 3 thickness groups of 0.5, 1.0, and 1.5 mm were divided into 2 subgroups according to the sintering methods (n=9): microwave and conventional sintering. A spectrophotometer was used to obtain CIELab color coordinates, and translucency parameters and CIEDE2000 color differences (ΔE 00) were measured. The relative amount of monoclinic phase (X(m)) was estimated with x-ray diffraction. The surface topography was analyzed by atomic force microscope and scanning electron microscope. Statistical analyses were conducted with two-way ANOVA (α=.05). RESULTS: There were small interaction effects on CIE L*, a*, and TP between sintering method and thickness (P<.001): L* (partial eta squared η(p)²=0.115), a* (η(p)²=0.136), and TP (η(p)²=0.206), although higher b* values were noted for microwave sintering regardless of thickness. Color differences between two sintering methods ranged from 0.52 to 0.96 ΔE(00) units. The X(m) values ranged from 7.03% to 9.89% for conventional sintering, and from 7.31% to 9.17% for microwave sintering. The microwave-sintered specimen demonstrated a smoother surface and a more uniform grain structure compared to the conventionally-sintered specimen. CONCLUSION: With reduced processing time, microwave-sintered pre-colored dental monolithic zirconia ceramics can exhibit similar color perception and translucency to those by conventional sintering.
Ceramics* ; Clothing ; Color Perception ; Methods ; Microwaves* ; Spectrophotometry ; X-Ray Diffraction