Based on spleen deficiency-phlegm dampness as the core pathogenesis of obesity， and integrating recent advances in modern medicine regarding the key role of immune inflammation in obesity， this paper proposes a multidimensional pathogenic network of "obesity-spleen deficiency-phlegm dampness-immune imbalance". Various traditional Chinese medicine （TCM） herbs that strengthen the spleen， regulate qi， and resolve phlegm and dampness can treat obesity by improving spleen-stomach transport and transformation， promoting water-damp metabolism， and regulating immune homeostasis. This highlights immune inflammation as an important entry point to elucidate the TCM concepts of "spleen deficiency-phlegm dampness" and the therapeutic principle of "strengthening the spleen and eliminating dampness to treat obesity". By systematically analyzing the intrinsic connection between "spleen deficiency generating dampness， internal accumulation of phlegm dampness" and immune dysregulation in obesity， this paper aims to provide theoretical support for TCM treatment of obesity based on dampness.

Attention deficit hyperactivity disorder （ADHD） is often accompanied by tic disorder. The core pathogenesis is considered to be ministerial fire scorching yin and internal stirring of deficient wind， which leads to disharmony between the body and spirit， resulting in clinical manifestations. The treatment principles emphasize nourishing yin fluids， calming ministerial fire， and extinguishing endogenous wind （内风）. The method of nourishing yin fluids is applied throughout the entire treatment process， commonly using ingredients such as Shudihuang （Rehmanniae Radix Praeparata）， Shanzhuyu （Corni Fructus）， Gouqizi （Lycii Fructus）， Wuweizi （Schisandrae Chinensis Fructus）， and Tusizi （Cuscutae Semen）. These are combined with approaches to harmonize the zang-fu organs， primarily including extinguishing liver wind， clearing heart fire， nourishing kidney water， and strengthening spleen earth， thereby stabilizing ministerial fire and extinguishing endogenous wind. Additionally， emotional regulation and smoothing emotional constraint are essential to improve clinical symptoms in children with ADHD comorbid with tic disorder.

Objective To explore the feasibility and reference value of allogeneic lung transplantation and postoperative monitoring in miniature pigs for lung transplantation research. Methods Two miniature pigs (R1 and R2) underwent left lung allogeneic transplantation. Complement-dependent cytotoxicity tests and blood cross-matching were performed before surgery. The main operative times and partial pressure of arterial oxygen (PaO₂) after opening the pulmonary artery were recorded during surgery. Postoperatively, routine blood tests, biochemical blood indicators and inflammatory factors were detected, and pathological examinations of multiple organs were conducted. Results The complement-dependent cytotoxicity test showed that the survival rate of lymphocytes between donors and recipients was 42.5%-47.3%, and no agglutination reaction occurred in the cross-matching. The first warm ischemia times of D1 and D2 were 17 min and 10 min, respectively, and the cold ischemia times were 246 min and 216 min, respectively. Ultimately, R1 and R2 survived for 1.5 h and 104 h, respectively. Postoperatively, in R1, albumin (ALB) and globulin (GLB) decreased, and alanine aminotransferase increased; in R2, ALB, GLB and aspartate aminotransferase all increased. Urea nitrogen and serum creatinine increased in both recipients. Pathological results showed that in R1, the transplanted lung had partial consolidation with inflammatory cell infiltration, and multiple organs were congested and damaged. In R2, the transplanted lung had severe necrosis with fibrosis, and multiple organs had mild to moderate damage. The expression levels of interleukin-1β and interleukin-6 increased in the transplanted lungs. Conclusions The allogeneic lung transplantation model in miniature pigs may systematically evaluate immunological compatibility, intraoperative function and postoperative organ damage. The data obtained may provide technical references for subsequent lung transplantation research.

Objective To summarize and analyze the efficacy and influencing factors of second allogeneic hematopoietic stem cell transplantation (allo-HSCT) for acute leukemia relapsing after the first allo-HSCT. Methods Clinical data of 17 patients with acute leukemia who underwent second allo-HSCT at Peking University First Hospital from January 2005 to December 2024 were retrospectively analyzed. Results Among the 17 patients, 7 achieved long-term disease-free survival after second transplantation. The median progression-free survival after successful second transplantation was 7 months (range 8 days to 69 months). The relapse fatality was 24%, and the transplant-related fatality was 35%. Conclusions Second transplantation is an effective treatment for relapsed and refractory acute leukemia, but the relapse fatality and transplant-related fatality remain high. Patient age, time of relapse after the first transplantation and disease status before second transplantation are all factors that affect the efficacy of second transplantation. Younger age, late relapse and complete remission of disease before second transplantation are all beneficial for long-term disease-free survival after second transplantation.

Hygroscopicity research has long been a key focus and hot topic in Chinese materia medica（CMM）. Elucidating hygroscopic mechanisms plays a vital role in formulation design， process optimization， and storage condition selection. Hygroscopic models serve as essential tools for characterizing CMM hygroscopic mechanisms， with various types available. The double exponential model is a kinetic mathematical model constructed based on the law of conservation of energy and Fick's first law of diffusion， tailored to the physical properties of CMM extracts. In recent years， this model has been extensively applied to simulate the dynamic moisture absorption behavior of CMM extracts and solid dosage forms under varying humidity conditions. It has revealed the correlation between moisture absorption kinetic parameters and material properties， offering a new perspective for characterizing the moisture uptake behavior of CMM. This paper systematically reviews the application progress of this model in the field of CMM， analyzes its advantages， disadvantages， and challenges in this domain， and explores its potential application trends in other fields. It aims to provide references for elucidating the moisture absorption mechanisms of CMM and researching moisture-proofing technologies， while also offering insights for its broader application in food and polymer materials.

ObjectiveTo explore the effect and mechanism of Jianpi Xiaoai prescription （JPXA） in ameliorating the 5-fluorouracil （5-FU） resistance of colon cancer. MethodsA HCT116/5-FU resistant cell line was established. Different concentrations （10%， 15%， 20%） of JPXA-containing serum and drug-free serum were used for intervention， and 10% fetal bovine serum （10% FBS）， fibroblast growth factor receptor （FGFR） inhibitor （AZD4547）， and recombinant fibroblast growth factor 2 （FGF2） were set as the control groups. Sensitive HCT116 cells were used in the FGF2 group， while HCT116/5-FU cells were used in other groups. Drug resistance， the level of FGF2 in the cell culture medium， the mRNA level of FGF2 in cells， and the protein levels of FGF2/FGFR and phosphatidylinositol 3-kinase/protein kinase B （PI3K/Akt） were determined. The drug-resistant cells were transplanted into the axilla of nude mice to establish a tumor model. The modeled mice were allocated into model， JPXA （15 g·kg^-1）， 5-FU （0.02 g·kg^-1）， JPXA+5-FU （15 g·kg^-1+0.02 g·kg^-1）， AZD4547 （0.012 5 g·kg^-1）， and AZD4547+5-FU （0.012 5 g·kg^-1+0.02 g·kg^-1） groups. The tumor growth and the protein levels of FGF/FGFR and PI3K/Akt in each group were observed. ResultsThe survival rate of HCT116/5-FU cells decreased in all the JPXA groups with different concentrations. The cell survival rate was decreased most obviously in the 20% JPXA group. The level of FGF2 in the cell culture medium and the mRNA level of FGF2 in cells of each JXPA group decreased， and the decrease was the most significant in the 20% group （P<0.01）. HCT116/5-FU cells showed up-regulated protein levels of FGF2 and phosphorylated fibroblast growth factor receptor 1 （p-FGFR1）， but down-regulated protein level of FGFR1 （P<0.01）. JPXA down-regulated the expression of FGF2 and p-FGFR1 and up-regulated the expression of FGFR1 （P<0.05）. In addition， JPXA down-regulated the expression levels of phosphorylated protein kinase B （p-Akt） and phosphorylated mammalian target of rapamycin （p-mTOR）， while up-regulating the expression levels of Akt and Bcl-2-asociated death promoter （Bad） （P<0.05）. Animal experiments showed that the JPXA combined with 5-FU significantly inhibited the growth of drug-resistant tumors， reduced the protein levels of FGF2， p-FGFR1， phosphorylated phosphatidylinositol-3-kinase （p-PI3K）， p-Akt， and p-mTOR， and increased the expression of Bad. It indicated that JPXA can inhibit the FGF2/FGFR1 signaling in colon cancer and regulate PI3K/Akt and downstream signaling pathways. ConclusionJPXA can ameliorate the chemotherapy resistance of colon cancer through down-regulating FGF2 expression and inhibiting the activation of the PI3K/Akt signaling pathway.

ObjectiveTo investigate the effect and mechanism of transplantation of human umbilical cord mesenchymal stem cell （hUC-MSC） with overexpression of the Numb gene in the treatment of cholestatic liver fibrosis （CLF）. MethodsThe technique of lentiviral transfection was used to induce the overexpression of the Numb gene in hUC-MSC （hUC-MSC^Numb-OE）， and hUC-MSC transfected with empty vector （hUC-MSC^OE-EV） was used as negative control. Bile duct ligation （BDL） was performed to establish a rat model of CLF， and then the rats were randomly divided into BDL group， hUC-MSC group， hUC-MSC^OE-EV group， and hUC-MSC^Numb-OE group， while a sham-operation group was also established. The rats in the intervention groups were given a single splenic injection of the corresponding cells after BDL， and samples were collected at the end of week 4. Related indicators were measured， including serum biochemistry， liver histopathology， the content of hydroxyproline （Hyp） in the liver， hepatic stellate cell activation， ductular reaction， liver regeneration， and the expression levels of key molecules in the Numb-p53 signaling axis. A one-way analysis of variance was used for comparison of continuous data between multiple groups， and the least significant difference t-test was used for further comparison between two groups. ResultsCompared with the BDL group， the hUC-MSC group and the hUC-MSC^OE-EV group had significant reductions in the levels of serum biochemical parameters （aspartate aminotransferase， gamma-glutamyl transpeptidase， total bile acid， total bilirubin， and direct bilirubin）， liver fibrosis markers （the content of Hyp and the expression levels of alpha-smooth muscle actin， tumor necrosis factor-α， and transforming growth factor-beta 1）， and ductular reaction markers （the expression levels of CK7 and CK19） （all P <0.05）， and compared with the hUC-MSC^OE-EV group， the hUC-MSC^Numb-OE group had significantly greater improvements in the above indicators （all P <0.05）. In addition， compared with the hUC-MSC^OE-EV group， the hUC-MSC^Numb-OE group had significant improvements in the expression levels of liver regeneration-related markers （albumin and hepatocyte nuclear factor 4α） and the molecules associated with the Numb-p53 signaling axis （Numb， pNumb， Mdm2， and p53） （all P <0.05）. ConclusionOverexpression of the Numb gene can enhance the therapeutic effect of hUC-MSC on CLF， possibly by activating the Numb-PTB^L-p53-HNF4α axis， promoting the hepatic differentiation of hUC-MSCs and subsequently enhancing liver regeneration.

BACKGROUND:In previous studies,glass materials were infiltrated into 5Y-PSZ ultra-translucent zirconia by a double sintering method to prepare 5Y-PSZ-YGI graded glass infiltrated ultra-translucent zirconia materials that can maintain high transparency and high flexural strength.OBJECTIVE:To evaluate the in vitro biocompatibility of 5Y-PSZ-YGI graded glass infiltrated ultra-translucent zirconia materials.METHODS:(1)Glass materials were infiltrated into 5Y-PSZ ultra-translucent zirconia by double sintering to prepare 5Y-PSZ-YGI graded glass infiltrated ultra-translucent zirconia.5Y-PSZ-YGI graded glass infiltrated ultra-translucent zirconia(or 5Y-PSZ ultra-translucent zirconia,3Y-TZP transparent zirconia)was placed in DMEM culture medium containing 10％fetal bovine serum for 12,24 and 72 hours,and the surface area ratio of culture medium to sample was 3 mL/cm2,and the 12-,24-and 72-hour material extracts were obtained.(2)After culturing mouse fibroblast L929 for 24 hours,the original culture medium was discarded and divided into 7 groups for culture:the control group was replaced with DMEM culture medium containing 10％fetal bovine serum by volume,and the other 6 groups were replaced with 24-hour extract of 3Y-TZP transparent zirconia,24-hour extract of 5Y-PSZ ultra-translucent zirconia,24-hour extract of 5Y-PSZ-YGI graded glass infiltrated ultra-translucent zirconia,72-hour extract of 3Y-TZP transparent zirconia,72-hour extract of 5Y-PSZ ultra-translucent zirconia,and 72-hour extract of 5Y-PSZ-YGI graded glass infiltrated ultra-translucent zirconia.After 1,3,and 5 days of culture,cell growth was observed under a microscope,and the cell proliferation rate was obtained by CCK-8 assay to determine cytotoxicity.(3)Human anticoagulated blood was mixed with 5Y-PSZ-YGI graded glass infiltrated ultra-translucent zirconia,5Y-PSZ ultra-translucent zirconia,and 3Y-TZP transparent zirconia,and the hemolysis rate was detected after 0.5 hours.Human anticoagulated blood was mixed with 12-hour extract of 3Y-TZP transparent zirconia,12-hour extract of 5Y-PSZ ultra-translucent zirconia,and 12-hour extract of 5Y-PSZ-YGI graded glass infiltrated ultra-translucent zirconia,and the hemolysis rate was detected after 0.5 hours.RESULTS AND CONCLUSION:(1)Under the microscope,it could be seen that the number of cells in each group increased with the extension of culture time,and the cell morphology of each experimental group was basically the same as that of the control group.The cytotoxicity grade of the 24-hour extract of 3Y-TZP transparent zirconia group on the first day of culture was grade 0,and the cytotoxicity grade of the other experimental groups at each time period was grade 1.(2)Neither the material nor the material extract caused obvious hemolytic reaction,and the hemolytic rate was less than 5％.(3)The results showed that 5Y-PSZ-YGI graded glass infiltrated ultra-translucent zirconia had no significant effect on the growth and proliferation of mouse fibroblasts L929,and did not cause hemolytic reaction with human blood,and had good in vitro biocompatibility.

BACKGROUND:3D-printed bone tissue engineering scaffolds have obvious advantages in the research and clinical treatment of bone defect repair.As one of the important raw materials for 3D printed bone scaffolds,poly-L-lactic acid has a great potential for application in performing bone defect repair,but clinical patients with different bone defect causative factors have different requirements for the comprehensive performance of poly-L-lactic acid bone scaffolds.OBJECTIVE:To summarize and review the development of 3D printing technology and poly-L-lactic acid scaffolds and the design strategies chosen for scaffolds for bone repair in the setting of bone diseases such as osteomyelitis,bone tumor,osteonecrosis,and osteoporosis.METHODS:Literature from CNKI,WanFang,PubMed,Science Direct,and Web of Science databases were searched and screened from 1994 to 2024.Search terms were"3D printing,polylactic acid,bone tissue engineering scaffold,osteomyelitis,bone tumor,osteonecrosis,osteoporosis,bone defect"in Chinese and English.The screened 62 articles were systematically summarized and analyzed.RESULTS AND CONCLUSION:(1)Poly-L-lactic acid is considered to be an ideal raw material for artificial bone scaffold design due to its non-toxicity,processability,biocompatibility,and ability to self-degrade in the human environment.The application of 3D printing technology has enabled poly-L-lactic acid bone scaffolds to meet the multilayered and porous structural design requirements of biomimetic artificial bone repair materials,and to optimize the mechanical properties for better bone repair.(2)According to different bone disease microenvironments,timely adjustment of the functional design of poly-L-lactic acid scaffolds is important for the comprehensive osteogenic efficacy of the scaffolds.The article discusses the application of poly-L-lactic acid scaffolds in bone disease environments such as osteomyelitis,bone tumor,osteonecrosis,and osteoporosis,and highlights the importance of rationally grasping the timing of bone disease treatment and bone tissue regeneration for bone defects caused by different bone diseases.(3)Although poly-L-lactic acid scaffolds show potential in bone repair,there are still some problems,such as the need to further optimize the structural design of the scaffolds to fit new bone regeneration,enhance the bioactivity of the scaffolds,and take into account other functions(e.g.,antimicrobial,anti-tumor,and anti-osteoporosis)in order to adapt to the needs of bone tissue repair in different pathological environments.

BACKGROUND:The surgical treatment of severe lumbar fractures is mainly based on posterior short-segment fixation,and different pedicle screw fixation methods have differences in biomechanical properties.OBJECTIVE:To simulate three different screw fixation techniques in the treatment of severe L1 vertebral fractures using three-dimensional finite element technology,and to compare and analyze the biomechanical characteristics of the upper and lower intervertebral discs,fractured vertebrae,and internal fixation devices during the simulated spinal movement.METHODS:A three-dimensional model of the T11-L3 spine was established to simulate severely unstable fracture of the lumbar 1 vertebral body using the designed three pedicle screw fixation methods:Model A with 4 traditional pedicle screws(2 in each T12 and L2),model B with 4 Universal Spine System pedicle screws(2 in each T12 and L2),and Model C were bilateral intermediate fixation with 6 pedicle screws(2 in each of T12,L1,and L2).Restraint and load were applied to simulate the maximum stress and maximum displacement of the internal fixation,the displacement of the L1 vertebral body,and stress on the intervertebral discs superior and inferior to the injured vertebra during the anterior flexion,posterior extension,left-sided bending,right-sided bending and left-right rotation of the lumbar spine.RESULTS AND CONCLUSION:(1)The maximum displacement and motion range of the lumbar 1 vertebra with Model C in flexion and extension,left bending,right bending,left rotation,and right rotation were lowest in the tested motion states;the maximum stress of the screws and connecting rods was the smallest;and the maximum stress of intervertebral discs superior and inferior to the injured vertebra was the smallest.This was followed by the Model B,while the maximum displacement and motion range of the lumbar 1 vertebra and the stress and displacement of the screw connecting rod in the Model A were highest,but it showed the worst biomechanical stability and was more prone to adjacent segment degeneration.(2)These results show that bilateral intermediate fixation with six pedicle screws during the treatment of severe lumbar fractures is more dispersed in internal fixator stress and exhibits the least displacement and motion range of the vertebral pedicle screws and rods compared with four universal spinal system pedicle screws and four traditional pedicle screws.Thus,it can effectively reduce the occurrence of internal fixation failure and the adjacent segment degeneration.