OBJECTIVE: To compare and analyze the feasibility of autologous facet joint bone block as an alternative to polyetheretherketone (PEEK) cage in lumbar intervertebral fusion surgery for patients with osteoporosis. METHODS: From December 2018 to June 2021, the case data of patients with osteoporosis (T value ≤ -2.5 on dual energy X-ray bone density) who underwent posterior lumbar interbody fusion in the Fourth Medical Center, Chinese PLA General Hospital were retrospectively reviewed. All the cases were followed up for no less than 12 months and were divided into two groups according to the differences of interbody fusion materials: the autologous facet joint bone block group (autogenous bone group) and the PEEK cage group (PEEK group). The general data [such as age, gender, body mass index (BMI), primary diagnosis, distribution of fusion segments, bone mineral density of lumbar (BMD), incidence of preoperative complications], the perioperative data (such as duration of operation, intraoperative blood loss, postoperative drainage, perioperative allogeneic blood transfusion rate), and the incidence of postoperative complications were compared between the two groups. Imaging parameters (disc height, lumbar lordosis angle, segment lordosis angle, segmental lordosis angle, disc height improvement rate, and fusion rate) and lumbar functional scores [visual analogue scale (VAS), Oswestry disability index (ODI), Japanese Orthopedics Association (JOA) score for lower back pain] were compared to evaluate the clinical efficacy between the kinds of intervertebral fusion materials 1 week, 3 months and 6 months postoperative and at the last follow-up. RESULTS: A total of 118 patients were enrolled, including 68 cases in the autogenous bone group and 50 cases in the PEEK group, there were no statistical differences in age, gender, BMI, primary diagnosis, distribution of fusion segments, BMD, incidence of preoperative complications, duration of operation, intraoperative blood loss, postoperative drainage, perioperative allogeneic blood transfusion rate, incidence of postoperative complications, all the preoperative imaging parameters and all the lumbar function scores between the two groups (P>0.05). Postoperative superficial surgical site infections occurred in 3 patients in the autogenous bone group and 2 patients in the PEEK group. At the last follow-up, 3 cases of intervertebral graft collapse occurred in the autogenous bone group and 5 cases in the PEEK group, 1 case of graft subsidence in the autogenous bone group and 1 case in the PEEK group. All the imaging parameters showed significant differences between postoperation and preoperation (P < 0.05), and all the imaging parameters showed significant differences between 1 week and 3 months postoperative in both groups (P < 0.05). The height, angle of fusion gap in the autogenous bone group were lower than those in the PEEK group 1 week postoperatively (P < 0.05), and the fusion gap height improvement rate in the autogenous bone group was lower than that in the PEEK group (P < 0.05). The cases in both groups started to show final fusion 3 months after surgery, and the fusion rate in the autogenous bone group was 75% 6 months postoperatively, which was significantly higher than the rate of 56% in the PEEK group (P < 0.05), and there was no statistically significant difference in the final fusion rate between the two groups (P>0.05). The ODI, the postoperative VAS score was significantly lower than that in preoperation, while the postoperative JOA score was significantly higher than that in preoperation (P < 0.05). The ODI was lower while the JOA score was higher of the autogenous bone group than that of the PEEK group 6 months postoperatively (P < 0.05). CONCLUSION In osteoporosis patients, good interbody fusion rate and improvement of lumbar vertebral function can be obtained by using autologous facet joint bone block or PEEK cage, while the fusion rate and the improvement of lumbar function with autologous facet joint bone block are better than those with PEEK cage 6 months post-operatively. PEEK cage is superior to autologous facet joint bone block in intervertebral distraction and improvement of lumbar lordosis. Significant disc space subsidence occurred in osteoporotic patients within 3 months after lumbar interbody fusion, and the subsidence of PEEK cage was more obvious than that of autologous facet joint bone block.
Humans ; Retrospective Studies ; Lordosis ; Zygapophyseal Joint ; Spinal Fusion/methods* ; Polyethylene Glycols/therapeutic use* ; Treatment Outcome ; Ketones ; Lumbar Vertebrae/surgery* ; Osteoporosis ; Blood Loss, Surgical ; Postoperative Complications ; Postoperative Hemorrhage

OBJECTIVE: To investigate whether 3D-printed artificial vertebral body can reduce prosthesis subsidence rate for patients with cervical chordomas, through comparing the rates of prosthesis subsidence between 3D printing artificial vertebral body and titanium mesh for anterior spinal reconstruction after total spondylectomy. METHODS: This was a retrospective analysis of patients who underwent surgical treatment for cervical chordoma at our hospital from March 2005 to September 2019. There were nine patients in the group of 3D artificial vertebral body (3D group), and 15 patients in the group of titanium mesh cage (Mesh group). The patients' characteristics and treatment data were extracted from the medical records, including age, gender, CT hounsfield unit of cervical vertebra and surgical information, such as the surgical segments, time and blood loss of surgery, frequency and degree of prosthesis subsidence after surgery. Radiographic observations of prosthesis subsidence during the follow-up, including X-rays, CT, and magnetic resonance imaging were also collected. SPSS 22.0 was used to analysis the data. RESULTS: There was no significant difference between the two groups in gender, age, CT hounsfield unit, surgical segments, time of surgery, blood loss of posterior surgery and total blood loss. Blood loss of anterior surgery was 700 (300, 825) mL in 3D group and 1 500 (750, 2 800) mL in Mesh group (P < 0.05). The prosthesis subsidence during the follow-up, 3 months after surgery, there was significant difference between the two groups in mild prosthesis subsidence (P < 0.05). The vertebral height of the 3D group decreased less than 1 mm in eight cases (no prosthesis subsidence) and more than 1 mm in one case (mild prosthesis subsidence). The vertebral height of the Mesh group decreased less than 1 mm in five cases (no prosthesis subsidence), and more than 1 mm in eight cases (mild prosthesis subsidence). Two patients did not have X-rays in 3 months after surgery. There was a statistically significant difference between the two groups in the prosthesis subsidence rate at the end of 12 months (P < 0.01). The vertebral height of eight cases in the 3D group decreased less than 1 mm (no prosthesis subsidence) and one case more than 3 mm (severe prosthesis subsidence). Four of the 15 cases in the Mesh group decreased less than 1 mm (no prosthesis subsidence), two cases more than 1 mm (mild prosthesis subsidence), and nine cases more than 3 mm (severe prosthesis subsidence). There was a statistically significant difference between the two groups in the prosthesis subsidence rate at the end of 24 months (P < 0.01). The vertebral height of seven cases in the 3D group decreased less than 1 mm (no prosthesis subsidence), one case more than 3 mm (severe prosthesis subsidence), and one case died with tumor. One case in the Mesh group decreased less than 1 mm (no prosthesis subsidence), one case more than 1 mm (mild prosthesis subsidence), 11 case more than 3 mm (severe prosthesis subsidence), one case died with tumor and one lost the follow-up. Moreover, at the end of 12 months and 24 months, there was significant difference between the two groups in severe prosthesis subsidence rate (P < 0.01). CONCLUSION 3D-printed artificial vertebral body for anterior spinal reconstruction after total spondylectomy for patients with cervical chordoma can provide reliable spinal stability, and reduce the incidence of prosthesis subsidence after 2-year follow-up.
Humans ; Chordoma/surgery* ; Retrospective Studies ; Vertebral Body ; Titanium ; Cervical Vertebrae/surgery* ; Printing, Three-Dimensional ; Spinal Fusion/methods* ; Treatment Outcome

OBJECTIVE: To observe the effect of buccal acupuncture on pain after lumbar spinal fusion. METHODS: Sixty patients undergoing lumbar spinal fusion were randomly divided into an observation group (30 cases, 1 case dropped off) and a control group (30 cases, 1 case was eliminated). The patients in the control group were treated with routine anesthesia. On the basis of the control group, the patients in the observation group were treated with buccal acupuncture at bilateral back point, waist point, and sacral point for 30 min per treatment. The first acupuncture was given before anesthesia induction, and then once a day postoperation for two days, totally 3 treatments. The dosage of sufentanil, the number of remedial analgesia, and the incidence of nausea and vomiting within 48 h after surgery were compared between the two groups; rest and motion visual analogue scale (VAS) scores at 2 (T1), 8 (T2), 12 (T3), 24 (T4), and 48 (T5) h after surgery were observed; the quality of recovery-15 scale (QoR-15) at 24 and 48 h after surgery were evaluated. RESULTS: The dosage of sufentanil and the number of remedial analgesia within 48 h after surgery in the observation group were lower than those in the control group (P<0.01). There was no significant statistically difference in rest and motion VAS scores between the two groups in T1, T2, T3, T4 and T5 (P>0.05). The QoR-15 scores in the observation group at 24 and 48 h after surgery were higher than those in the control group (P<0.01). The incidence of nausea in the observation group was lower than that in the control group (P<0.05). CONCLUSION Buccal acupuncture could reduce the amount of postoperative analgesic drugs of patients after lumbar spinal fusion, and promote early postoperative recovery.
Humans ; Spinal Fusion/adverse effects* ; Sufentanil ; Acupuncture Therapy ; Pain Management ; Pain ; Nausea

To investigate the effects of postoperative fusion implantation on the mesoscopic biomechanical properties of vertebrae and bone tissue osteogenesis in idiopathic scoliosis, a macroscopic finite element model of the postoperative fusion device was developed, and a mesoscopic model of the bone unit was developed using the Saint Venant sub-model approach. To simulate human physiological conditions, the differences in biomechanical properties between macroscopic cortical bone and mesoscopic bone units under the same boundary conditions were studied, and the effects of fusion implantation on bone tissue growth at the mesoscopic scale were analyzed. The results showed that the stresses in the mesoscopic structure of the lumbar spine increased compared to the macroscopic structure, and the mesoscopic stress in this case is 2.606 to 5.958 times of the macroscopic stress; the stresses in the upper bone unit of the fusion device were greater than those in the lower part; the average stresses in the upper vertebral body end surfaces were ranked in the order of right, left, posterior and anterior; the stresses in the lower vertebral body were ranked in the order of left, posterior, right and anterior; and rotation was the condition with the greatest stress value in the bone unit. It is hypothesized that bone tissue osteogenesis is better on the upper face of the fusion than on the lower face, and that bone tissue growth rate on the upper face is in the order of right, left, posterior, and anterior; while on the lower face, it is in the order of left, posterior, right, and anterior; and that patients' constant rotational movements after surgery is conducive to bone growth. The results of the study may provide a theoretical basis for the design of surgical protocols and optimization of fusion devices for idiopathic scoliosis.
Humans ; Scoliosis/surgery* ; Spinal Fusion/methods* ; Lumbar Vertebrae/surgery* ; Osteogenesis ; Biomechanical Phenomena/physiology* ; Finite Element Analysis

OBJECTIVE: To establish the mode of anterior cervical surgery in outpatient setting, and evaluate its preliminary effectiveness. METHODS: A clinical data of patients who underwent anterior cervical surgery between January 2022 and September 2022 and met the selection criteria was retrospectively analyzed. The surgeries were performed in outpatient setting ( n=35, outpatient setting group) or in inpatient setting ( n=35, inpatient setting group). There was no significant difference between the two groups ( P>0.05) in age, gender, body mass index, smoking, history of alcohol drinking, disease type, the number of surgical levels, operation mode, as well as preoperative Japanese Orthopaedic Association (JOA) score, visual analogue scale score of neck pain (VAS-neck), and visual analogue scale score of upper limb pain (VAS-arm). The operation time, intraoperative blood loss, total hospital stay, postoperative hospital stay, and hospital expenses of the two groups were recorded; JOA score, VAS-neck score, and VAS-arm score were recorded before and immediately after operation, and the differences of the above indexes between pre- and post-operation were calculated. Before discharge, the patient was asked to score satisfaction with a score of 1-10. RESULTS: The total hospital stay, postoperative hospital stay, and hospital expenses were significantly lower in the outpatient setting group than in the inpatient setting group ( P<0.05). The satisfaction of patients was significantly higher in the outpatient setting group than in the inpatient setting group ( P<0.05). There was no significant difference between the two groups in operation time and intraoperative blood loss ( P>0.05). The JOA score, VAS-neck score, and VAS-arm score of the two groups significantly improved at immediate after operation when compared with those before operation ( P<0.05). There was no significant difference in the improvement of the above scores between the two groups ( P>0.05). The patients were followed up (6.67±1.04) months in the outpatient setting group and (5.95±1.90) months in the inpatient setting group, with no significant difference ( t=0.089, P=0.929). No surgical complications, such as delayed hematoma, delayed infection, delayed neurological damage, and esophageal fistula, occurred in the two groups. CONCLUSION The safety and efficiency of anterior cervical surgery performed in outpatient setting were comparable to that performed in inpatient setting. Outpatient surgery mode can significantly shorten the postoperative hospital stay, reduce hospital expenses, and improve the patients' medical experience. The key points of the outpatient mode of anterior cervical surgery are minimizing damage, complete hemostasis, no drainage placement, and fine perioperative management.
Humans ; Treatment Outcome ; Cervical Vertebrae/surgery* ; Outpatients ; Retrospective Studies ; Blood Loss, Surgical ; Spinal Fusion ; Neck Pain

OBJECTIVE: To investigate the feasibility of predicting proximal junctional kyphosis (PJK) in adults after spinal deformity surgery based on back-forward Bending CT localization images and related predictive indicators. METHODS: A retrospective analysis was performed for 31 adult patients with spinal deformity who underwent posterior osteotomy and long-segment fusion fixation between March 2017 and March 2020. There were 5 males and 26 females with an average age of 62.5 years (range, 30-77 years). The upper instrumented vertebrae (UIV) located at T ₅ in 1 case, T ₆ in 1 case, T ₉ in 13 cases, T ₁₀ in 12 cases, and T ₁₁ in 4 cases. The lowest instrumented vertebrae (LIV) located at L ₁ in 3 cases, L ₂ in 3 cases, L ₃ in 10 cases, L ₄ in 7 cases, L ₅ in 5 cases, and S ₁ in 3 cases. Based on the full-length lateral X-ray film of the spine in the standing position before and after operation and back-forward Bending CT localization images before operation, the sagittal sequence of the spine was obtained, and the relevant indexes were measured, including thoracic kyphosis (TK), lumbar lordosis (LL), local kyphosis Cobb angle (LKCA) [the difference between the different positions before operation (recovery value) was calculated], kyphosis flexibility, hyperextension sagittal vertical axis (hSVA), T ₂-L ₅ hyperextension C ₇-vertebral sagittal offset (hC ₇-VSO), and pre- and post-operative proximal junctional angle (PJA). At last follow-up, the patients were divided into PJK and non-PJK groups based on PJA to determine whether they had PJK. The gender, age, body mass index (BMI), number of fusion segments, number of cases with coronal plane deformity, bone mineral density (T value), UIV position, LIV position, operation time, intraoperative blood loss, osteotomy grading, and related imaging indicators were compared between the two groups. The hC ₇-VSO of the vertebral body with significant differences between groups was taken, and the receiver operating characteristic curve (ROC) was used to evaluate its accuracy in predicting the occurrence of PJK. RESULTS: All 31 patients were followed up 13-52 months, with an average of 30.0 months. The patient's PJA was 1.4°-29.0° at last follow-up, with an average of 10.4°; PJK occurred in 8 cases (25.8%). There was no significant difference in gender, age, BMI, number of fusion segments, number of cases with coronal plane deformity, bone mineral density (T value), UIV position, LIV position, operation time, intraoperative blood loss, and osteotomy grading between the two groups ( P>0.05). Imaging measurements showed that the LL recovery value and T ₈-L ₃ vertebral hC ₇-VSO in the PJK group were significantly higher than those in the non-PJK group ( P>0.05). There was no significant difference in hyperextension TK, hyperextension LL, hyperextension LKCA, TK recovery value, LL recovery value, kyphosis flexibility, hSVA, and T ₂-T ₇, L ₄, L ₅ vertebral hC ₇-VSO ( P>0.05). T ₈-L ₃ vertebral hC ₇-VSO was analyzed for ROC curve, and combined with the area under curve and the comprehensive evaluation of sensitivity and specificity, the best predictive index was hC ₇-L ₂, the cut-off value was 2.54 cm, the sensitivity was 100%, and the specificity was 60.9%. CONCLUSION Preoperative back-forward Bending CT localization image can be used to predict the occurrence of PJK after posterior osteotomy and long-segment fusion fixation in adult spinal deformity. If the patient's T ₈-L ₂ vertebral hC ₇-VSO is too large, it indicates a higher risk of postoperative PJK. The best predictive index is hC ₇-L ₂, and the cut-off value is 2.54 cm.
Male ; Female ; Humans ; Adult ; Middle Aged ; Retrospective Studies ; Blood Loss, Surgical ; Thoracic Vertebrae/surgery* ; Kyphosis/surgery* ; Lordosis/surgery* ; Spinal Fusion/methods* ; Tomography, X-Ray Computed ; Postoperative Complications/diagnostic imaging* ; Lumbar Vertebrae/surgery*

OBJECTIVE: To explore the effectiveness of a new point contact pedicle navigation template (referred to as "new navigation template" for simplicity) in assisting screw implantation in scoliosis correction surgery. METHODS: Twenty-five patients with scoliosis, who met the selection criteria between February 2020 and February 2023, were selected as the trial group. During the scoliosis correction surgery, the three-dimensional printed new navigation template was used to assist in screw implantation. Fifty patients who had undergone screw implantation with traditional free-hand implantation technique between February 2019 and February 2023 were matched according to the inclusion and exclusion criteria as the control group. There was no significant difference between the two groups ( P>0.05) in terms of gender, age, disease duration, Cobb angle on the coronal plane of the main curve, Cobb angle at the Bending position of the main curve, the position of the apical vertebrae of the main curve, and the number of vertebrae with the pedicle diameter lower than 50%/75% of the national average, and the number of patients whose apical vertebrae rotation exceeded 40°. The number of fused vertebrae, the number of pedicle screws, the time of pedicle screw implantation, implant bleeding, fluoroscopy frequency, and manual diversion frequency were compared between the two groups. The occurrence of implant complications was observed. Based on the X-ray films at 2 weeks after operation, the pedicle screw grading was recorded, the accuracy of the implant and the main curvature correction rate were calculated. RESULTS: Both groups successfully completed the surgeries. Among them, the trial group implanted 267 screws and fused 177 vertebrae; the control group implanted 523 screws and fused 358 vertebrae. There was no significant difference between the two groups ( P>0.05) in terms of the number of fused vertebrae, the number of pedicle screws, the pedicle screw grading and accuracy, and the main curvature correction rate. However, the time of pedicle screw implantation, implant bleeding, fluoroscopy frequency, and manual diversion frequency were significantly lower in trial group than in control group ( P<0.05). There was no complications related to screws implantation during or after operation in the two groups. CONCLUSION The new navigation template is suitable for all kinds of deformed vertebral lamina and articular process, which not only improves the accuracy of screw implantation, but also reduces the difficulty of operation, shortens the operation time, and reduces intraoperative bleeding.
Humans ; Orthopedic Procedures ; Pedicle Screws ; Retrospective Studies ; Scoliosis/surgery* ; Spinal Fusion/methods* ; Spine ; Surgery, Computer-Assisted/methods*

OBJECTIVE: To analyze the early effectiveness of unilateral biportal endoscopy (UBE) laminectomy in the treatment of two-level lumbar spinal stenosis (LSS). METHODS: The clinical data of 98 patients with two-level LSS treated with UBE between September 2020 and December 2021 were retrospectively analyzed. There were 53 males and 45 females with an average age of 59.9 years (range, 32-79 years). Among them, there were 56 cases of mixed spinal stenosis, 23 cases of central spinal canal stenosis, and 19 cases of nerve root canal stenosis. The duration of symptoms was 1.5- 10 years, with an average of 5.4 years. The operative segments were L _{2, 3} and L _{3, 4} in 2 cases, L _{3, 4} and L _{4, 5} in 29 cases, L _{4, 5} and L _5, S ₁ in 67 cases. All patients had different degrees of low back pain, among of which 76 cases were with unilateral lower extremity symptoms and 22 cases were with bilateral lower extremity symptoms. There were 29 cases of bilateral decompression in both segments, 63 cases of unilateral decompression in both segments, and 6 cases of unilateral decompression and bilateral decompression of each segment. The operation time, intraoperative blood loss, total incision length, hospitalization stay, ambulation time, and related complications were recorded. Visual analogue scale (VAS) score was used to assess the low back and leg pain before operation and at 3 days, 3 months after operation, and at last follow-up. The Oswestry disability index (ODI) was used to evaluate the functional recovery of lumbar spine before operation and at 3 months and last follow-up after operation. Modified MacNab criteria was used to evaluate clinical outcomes at last follow-up. Imaging examinations were performed before and after operation to measure the preservation rate of articular process, modified Pfirrmann scale, disc height (DH), lumbar lordosis angle (LLA), and cross-sectional area of the canal (CAC), and the CAC improvement rate was calculated. RESULTS: All patients underwent surgery successfully. The operation time was (106.7±25.1) minutes, the intraoperative blood loss was (67.7±14.2) mL, and the total incision length was (3.2±0.4) cm. The hospitalization stay was 8 (7, 9) days, and the ambulation time was 3 (3, 4) days. All the wounds healed by first intention. Dural tear occurred in 1 case during operation, and mild headache occurred in 1 case after operation. All patients were followed up 13-28 months with an average of 19.3 months, and there was no recurrence or reoperation during the follow-up. At last follow-up, the preservation rate of articular process was 84.7%±7.3%. The modified Pfirrmann scale and DH were significantly different from those before operation ( P<0.05), while the LLA was not significantly different from that before operation ( P=0.050). The CAC significantly improved ( P<0.05), and the CAC improvement rate was 108.1%±17.8%. The VAS scores of low back pain and leg pain and ODI at each time point after operation significantly improved when compared with those before operation, and the differences between each time points were significant ( P<0.05). According to the modified MacNab criteria, 63 cases were excellent, 25 cases were good, and 10 cases were fair, with an excellent and good rate of 89.8%. CONCLUSION UBE laminectomy is a safe and effective technique with little trauma and fast recovery for two-level LSS and the early effectiveness is satisfactory.
Male ; Female ; Humans ; Middle Aged ; Laminectomy ; Spinal Stenosis/surgery* ; Constriction, Pathologic/surgery* ; Low Back Pain ; Retrospective Studies ; Blood Loss, Surgical ; Endoscopy ; Lumbar Vertebrae/surgery* ; Spinal Fusion/methods* ; Decompression, Surgical ; Surgical Wound/surgery* ; Treatment Outcome

Humans ; Lumbosacral Region ; Minimally Invasive Surgical Procedures ; Spinal Fusion ; Lumbar Vertebrae/surgery* ; Treatment Outcome ; Retrospective Studies

OBJECTIVE: To analyze the causes of vertebral fracture during oblique lateral interbody fusion in the treatment of lumbar spondylopathy, summarize the clinical results, and propose preventive measures. METHODS: Retrospective analysis was made on the data of 8 cases of lumbar spondylopathy and vertebral fracture treated by oblique lateral interbody fusion in three medical centers from October 2014 to December 2018. All were female, aged from 50 to 81 years with an average of 66.4 years. Disease types included 1 case of lumbar degenerative disease, 3 cases of lumbar spinal stenosis, 2 cases of lumbar degenerative spondylolisthesis and 2 cases of lumbar degenerative scoliosis. Preoperative dual energy X-ray bone mineral density test showed that 2 cases had T-value >-1 SD, 2 cases had T-value -1 to -2.5 SD, and 4 cases had T-value <-2.5 SD. Single segment fusion was in 5 cases, two segment fusion in 1 case and three segment fusion in 2 cases. Four cases were treated with OLIF Stand-alone and 4 cases were treated with OLIF combined with posterior pedicle screw fixation. Postoperative imaging examination showed vertebral fracture, and all of them were single vertebral fracture. There were 2 cases of right lower edge fracture of upper vertebral body at fusion segment, 6 cases of lower vertebral body fracture at fusion segment, and 6 cases with endplate injury and fusion cage partially embedded in vertebral body. Three cases of OLIF Stand-alone were treated with pedicle screw fixation via posterior intermuscular approach, while one case of OLIF Stand-alone and four cases of OLIF combined with posterior pedicle screw fixation were not treated specially. RESULTS: The 5 cases of initial operation and 3 cases of reoperation did not show wound skin necrosis or wound infection. The follow-up time was from 12 to 48 months with an average of 22.8 months. Visual analogue scale (VAS) of low back pain was preoperative decreased from 4 to 8 points (averagely 6.3 points) and postoperative 1 to 3 points (averagely 1.7 points) at the final follow-up. Oswestry disability index (ODI) was preoperative 39.7% to 52.4% (averagely 40.2%), and postoperative 7.9% to 11.2% (averagely 9.5%) at the final follow-up. During the follow-up, there was no loosening or fracture of the pedicle screw system, and no lateral displacement of the fusion cage;however, the fusion cage at the vertebral fracture segment had obvious subsidence. The intervertebral space height of vertebral fracture segment was preoperaive 6.7 to 9.2 mm (averagely 8.1 mm), and postoperative 10.5 to 12.8 mm (averagely 11.2 mm). The improvement rate after operation was 37.98% compared to preoperative. The intervertebral space height at final follow-up was 8.4 to 10.9 mm (averagely 9.3 mm), and the loss rate was 16.71% compared with that after operation. At the final follow-up, interbody fusion was achieved in all cases except for one that could not be identified. CONCLUSION The incidence of vertebral fracture during oblique lateral interbody fusion in the treatment of lumbar spondylopathy is lower, and there are many reasons for fracture, including preoperative bone loss or osteoporosis, endplate injury, irregular shape of endplate, excessive selection of fusion cage, and osteophyte hyperplasia at the affected segment. As long as vertebral fracture is found in time and handled properly, the prognosis is well. However, it still needs to strengthen prevention.
Humans ; Female ; Male ; Spinal Fractures/surgery* ; Retrospective Studies ; Treatment Outcome ; Lumbar Vertebrae/surgery* ; Spondylolisthesis/surgery* ; Scoliosis ; Spinal Fusion/methods*