OBJECTIVE: To compare the cyclic fatigue resistance of nickel-titanium files made by 3 new heat treatment in simulated S-shaped root canals at different temperatures. METHODS: Gold heat-treated nickel-titanium files TruNatomy (25 mm, tip size 26#/0.04) and ProTaper Gold (25 mm, tip size 25#/0.08) were selected as the experimental group, M wire technique nickel-titanium file ProTaper Next (25 mm, tip size 25#/0.06) was selected as the control group. It was speculated that the Gold technique used in TruNatomy nickel-titanium file was R phase separation technique, which included a complete intermediate R-phase, increasing its flexibility. ProTaper Gold was a CM wire nickel-titanium file and the increased phase transformation temperature by heat treatment introduced martensite at room temperature, while it underwent gold heat treatment on the surface, generating an intermediate R phase during phase transformation, providing hyperelastic. ProTaper Next used M wire technique, M wire included austenite at room temperature, where heat mechanical processing introduced hardened martensite, which was incapable of participating phase transformation. Because of the lower elastic modulus of hardened martensite than austenite, the flexibility of the file was increased. Twenty instruments of each nickel-titanium file were submitted to the cyclic fatigue test by using a simulated canal with double curvatures at room tem-perature (24 ℃) and 65 ℃, 10 instruments of each nickel-titanium file were selected at each temperature (n=10). At the same temperature, the number of cyclic fatigue (NCF) and fragment length were analyzed by using One-Way analysis of variance at a significance level of P < 0.05. NCF and fragment length of the same nickel-titanium file at room temperature and 65 ℃ were compared by paired sample t test and the significance level was α=0.05. Fractured surfaces were analyzed by using scanning electron microscope. RESULTS: In double-curved canals, all the failure of the files due to cyclic fatigue was first seen in the apical curvature before the coronal curvature. At room temperature, in the apical curvature, NCF of TruNatomy was 344.4±96.6, ProTaper Gold was 175.0±56.1, ProTaper Next was 133.3±39.7, NCF of Tru Natomy was the highest (P < 0.05). In the coronal curvature, NCF of TruNatomy was 618.3± 75.3, ProTaper Gold was 327.5±111.8, ProTaper Next was 376.6±67.9, NCF of TruNatomy was also the highest (P < 0.05). There was no significant difference among the apical and coronal fragment length of the 3 nickel-titanium files (P>0.05). At 65 ℃, in the apical curvature, NCF of TruNatomy was 289.6±65.8, ProTaper Gold was 187.5±75.4, ProTaper Next was 103.0±38.5, NCF of TruNatomy was the highest (P < 0.05). In the coronal curvature, NCF of TruNatomy was 454.2±45.4, ProTaper Gold was 268.3±31.4, ProTaper Next was 283.8±31.7, NCF of TruNatomy was also the highest (P < 0.05). The apical fragment length of ProTaper Next was the highest (P < 0.05), and there was no significant difference among coronal fragment length of the 3 nickel-titanium files (P>0.05). Compared with room temperature, at 65 ℃, in the coronal curvature, NCF of TruNatomy decreased significantly (P < 0.05). The fractured surfaces of the three nickel-titanium files demonstrated typical cyclic fatigue. CONCLUSION Gold heat-treated nickel-titanium file had better cyclic fatigue resistance than M wire nickel-titanium file in S-shaped root canals.
Nickel/chemistry* ; Titanium/chemistry* ; Hot Temperature ; Root Canal Preparation/methods* ; Humans ; Materials Testing ; Gold/chemistry* ; Dental Alloys/chemistry* ; Stress, Mechanical

OBJECTIVE: To evaluate the filling quality of single cone obturation in root canal model with irregular structure (Hus&Kim Ⅴ, Yin Ⅱ-type isthmus) which established by 3D printing technology using slices and radiographic methods, in order to provide reference for clinical practice. METHODS: (1) Extracted fresh premolars with Hus&Kim Ⅴ and Yin-type Ⅱ isthmus were collected and scanned by cone-beam computed tomography (CBCT), then standard root canal models were designed and printed. Rhodamine B staining and bias fitting were used to verify the availability of the models. (2) 30 root canal models were randomly divided into 3 groups according to different filling methods (n=10). CONTROL GROUP: vertical compaction obturation; Experimental group 1: single cone obturation with 0.06-taper cone (30#); Experimental group 2: single cone obturation with 0.04-taper cone (35#), GuttaFlow 2 as canal sealers. Slices were taken at 2, 4, 6, and 8 mm from the root apex in the direction perpendicular to the long axis of the root and observed under a stereomicroscope to calculate the percentage of filling area (PAV), percentage of gutta-percha-filled area (PGFA), percentage of sealer filled area (PSFA). (3) On the basis of the above results, two groups (n=4) were selected to further analyze the filling quality by micro-computed tomography (Micro-CT), the filling volume of main root canal and the isthmus were obtained, and the percentage of filling volume (PFV) was calculated. Two-way ANOVA was used to evaluate the differences between the groups, and Tukey' s multiple comparison was used to compare the data between the groups and within the groups. RESULTS: (1) Rhodamine B staining solution could overflow the apical foramen, and the main root canal system and the isthmus area were stained, showed no remnants of support material. The 3D standard deviation of the printed model data was 0.03 mm, and the average fitting distance was 0.02 mm. (2) The PFA of the two experimental groups were both significantly lower than that of the control group (F=45.04, P < 0.01). There was no statistical difference of the PFA at apical 2 and 4 mm between the two experimental groups (P>0.01), but at the middle and coronal portions of the root canal (6, 8 mm), the PFA of the experimental group 1 was higher than that of the experimental group 2 (P < 0.01). PFA in the apical 2, 4 mm of the two experimental groups were both lower than that in the middle and coronal portions 6, 8 mm of the canal (P < 0.01). There was no difference in the PGFA and PSFA between the two experimental groups at the apical 2, 4 mm (F=2.383, P>0.01). (3) The results of Micro-CT showed that the PFV of the experimental group 1 was statistically different with the control group (F=47.33, P < 0.01). The PFV of the experimental group 1 was 54.33%±4.35% in the isthmus and 78.31%±4.21% in the main root canal, which were both lower than the PFV of the control group of 76.48%±4.89% (isthmus) and 86.90%±3.29% (main root canal, P < 0.01). The PFV of the main root canal in the experimental group 1 was higher than that in the isthmus (P < 0.01), while there was no difference between the isthmus and the main root canal in the control group (P>0.01). CONCLUSION In the irregular root canal structure with isthmus, using large-taper gutta-percha can improve the filling quality of the middle and upper part of the canal, but the percentage of filling volume in the isthmus is lower than that of the main canal, and more technical improvements are needed.
Humans ; Root Canal Obturation/methods* ; Cone-Beam Computed Tomography ; Root Canal Filling Materials ; Dental Pulp Cavity/diagnostic imaging* ; Printing, Three-Dimensional ; In Vitro Techniques ; Gutta-Percha ; Bicuspid

Instrument separation is a critical complication during root canal therapy, impacting treatment success and long-term tooth preservation. The etiology of instrument separation is multifactorial, involving the intricate anatomy of the root canal system, instrument-related factors, and instrumentation techniques. Instrument separation can hinder thorough cleaning, shaping, and obturation of the root canal, posing challenges to successful treatment outcomes. Although retrieval of separated instrument is often feasible, it carries risks including perforation, excessive removal of tooth structure and root fractures. Effective management of separated instruments requires a comprehensive understanding of the contributing factors, meticulous preoperative assessment, and precise evaluation of the retrieval difficulty. The application of appropriate retrieval techniques is essential to minimize complications and optimize clinical outcomes. The current manuscript provides a framework for understanding the causes, risk factors, and clinical management principles of instrument separation. By integrating effective strategies, endodontists can enhance decision-making, improve endodontic treatment success and ensure the preservation of natural dentition.
Humans ; Root Canal Therapy/adverse effects* ; Consensus ; Root Canal Preparation/adverse effects*

OBJECTIVES: We aimed to compare the apical sealing properties of three endodontic sealers, namely, C-Root SP (C-R), iRoot SP, and GuttaFlow Bioseal (GFB) in vitro. METHODS: Eighty-two single-rooted premolars and anterior teeth were prepared by using M3 machine with nickel-titanium file and randomly divided into six experimental groups (n=12) and two control groups (n=5). Group A1: single-cone technique (SC)+C-R; group B1: SC+iRoot SP; group C1: SC+GFB; group A2: single-cone with ultrasonic activation (SU)+C-R; group B2: SU+iRoot SP; group C2: SU +GFB; group D: positive control group, and group E: negative control group. Dye penetration length and lateral root canal filling in each group were measured by dye penetration test. A scanning electron microscope (SEM) was used to observe the interface between gutta pertscha, root canal sealer, and dentin wall. Dye penetration length was measured and analyzed by Kruskal-Wallis test, and data on lateral root canal filling were evaluated using Chi-square. RESULTS: The dye penetration length in group A1 was lower than that in groups C1 and A2 (P<0.05) but was not significantly different from the other groups (P>0.05). Lateral root canal filling was not significantly different among all groups (P>0.05). SEM showed that GFB was slightly better than C-R and iRoot SP in binding to gutta pertcha and dentin wall. CONCLUSIONS GFB, C-R, and iRoot SP demonstrate excellent apical sealing ability. Under the conditions tested in this study, SU did not yield significantly improve the apical sealing ability of the three root canal sealers.
Root Canal Filling Materials/chemistry* ; Humans ; Gutta-Percha ; Microscopy, Electron, Scanning ; Root Canal Obturation/methods* ; Ceramics ; Dimethylpolysiloxanes ; Drug Combinations

Fused teeth are usually formed by the partial or complete fusion of two normal tooth germs during the development process and belong to dental developmental abnormalities. Fused teeth are relatively rare clinically, and those occurring in the posterior tooth area are even rarer. This article reports a case of fused teeth between the first permanent molar and the second permanent molar in the right mandible. This fused tooth had a complex root canal anatomical structure (seven root canals). The number and location of the root canals were analyzed by cone beam computed tomography, and root canal treatment was successfully completed with the assistance of microscope.
Humans ; Molar/diagnostic imaging* ; Mandible ; Dental Pulp Cavity/abnormalities* ; Cone-Beam Computed Tomography ; Root Canal Therapy/methods* ; Fused Teeth/surgery*

Dental trauma is one of the relatively common emergencies in clinical dental practice, with a high incidence rate, and the maxillary central incisors are the most frequently affected. This article reports a case of a 17-year-old female patient who suffered traumatic complete avulsion of teeth 11 and 21, with tooth 21 lost after avulsion. The prognosis for replantation was poor due to the absence of the buccal alveolar bone wall of tooth 11. Therefore, tooth 11 was treated with extracorporeal root canal therapy and then replanted into the alveolar socket of tooth 21, which had better conditions, followed by elastic splint fixation. After 20 months of follow-up observation, the affected tooth maintained a stable functional position, with no periapical inflammation or ankylosis observed. Subsequently, delayed implant restoration at the site of tooth 11 was performed, ultimately achieving a favorable treatment outcome. This case may provide new insights and references for future clinical practices in tooth replantation.
Humans ; Female ; Tooth Replantation/methods* ; Incisor/injuries* ; Adolescent ; Tooth Avulsion/therapy* ; Maxilla ; Root Canal Therapy

OBJECTIVES: This study aimed to evaluate the filling effects of three biomaterial root canal sealers [iRoot SP, C-Root SP, and GuttaFlow Bioseal (GFB)] by using Micro-CT. METHODS: Sixty single-canal detached premolars were selected. After crown amputation, their uniform working length was set at 12 mm and prepared to a 06 taper 30# with M3 nickel-titanium file. The samples were randomly divided into six groups with different sealers and obturation techniques: iRoot SP+single-cone technique (SC), C-Root SP+SC, GFB+SC, iRoot SP+single cone-mediated ultrasonic technique (SU), C-Root SP+SU, and GFB+SU. Samples were scanned by Micro-CT, and the total and segmented filling rates were calculated with Mimics 22.0 software after 3D reconstruction. RESULTS: The overall filling rate of the three biomaterial root canal sealers was higher than 90%. The overall and coronal third and middle third segment filling rate of groups iRoot SP+SC, C-Root SP+SC was higher than that of group GFB+SC (P<0.01), with no significant difference between groups iRoot SP+SC and C-Root SP+SC (P>0.05). On the apical third, no significant difference was found among each group (P>0.05). The overall and segment filling rate of groups iRoot SP+SU and C-Root SP+SU was higher than that of GFB+SU (P<0.01), with no significant difference between groups iRoot SP+SU and C-Root SP+SU (P>0.05). The filling rate of the apical 1/3 of group C-Root+SC was lower than that of group C-Root+SU (P<0.01), and the filling rate of the coronal 1/3 of group GFB+SC was higher than that in the GFB+SU (P<0.01). Nevertheless, no significant difference was found in other filling rate of two obturation techniques (P>0.05). CONCLUSIONS The overall filling rate of the three biomaterial root canal sealers using SC and SU are satisfactory. iRoot SP and C-Root SP have similar filling rates, which are significantly higher than that of GFB. C-Root SP combined with SU technique can improve the filling quality of the root apical.
Root Canal Filling Materials ; X-Ray Microtomography ; Humans ; Root Canal Obturation/methods* ; Gutta-Percha ; Dimethylpolysiloxanes ; Drug Combinations ; Dental Pulp Cavity/diagnostic imaging* ; Bicuspid

When the use of root canal retreatment and apical surgery experiences difficulty in treating endodontic diseases, intentional replantation is an optional clinical technique used to retain the tooth. A 28-year-old female complained of chewing discomfort at the mandibular second molar after undergoing root canal treatment 3 month ago. History record and radiographic examination revealed that a C-shaped root canal system was filled with gutta-percha in the mandibular second molar. A radiolucency area existed at the root furcal area with a thin canal wall in the distal and mesial roots. Intentional replantation was used to treat this tooth. The clinical and radiographic results showed that intentional replantation and nano-biomaterial application facilitated infection control, tooth retention, and periodontal tissue regeneration.
Female ; Humans ; Adult ; Tooth Replantation ; Root Canal Therapy ; Dental Pulp Cavity ; Gutta-Percha/therapeutic use* ; Tooth Root ; Molar/surgery* ; Retreatment

OBJECTIVES: This study aimed to compare the effectiveness of ultrasound and acoustic and laser cleaning of curved root canals. METHODS: A total of 92 molars with independent root canals with a curvature of 20°-40° were prepared and standardized at 04 25# and stained with gentian violet solution for 72 h. Among them, 52 were randomly divi-ded into four groups for final rinsing (n=13): NI group, PUI group, EDDY group, and PIPS group. Ten samples in each group were cut horizontally along the long axis perpendicular to the root and divided into curved upper, curved, and apical segments. Images were taken with a stereomicroscope and Image J measurements were taken to calculate the depth of rinse penetration. The remaining three samples from each group were split along the long axis of the dentin, photographed by scanning electron microscope to record the dentin tubule exposure and staining layer, and scored for staining layer by double-blind method. SPSS 26.0 software was used to perform statistical analysis and select the best flushing method. An extra 40 samples were randomly divided into four groups for detection of flushing fluid penetration depth (n=10): 10, 20, 30, and 40 s. RESULTS: In the upper part, the mean depth of infiltration was not significantly different between the experimental and control groups (P>0.05). The PIPS group had a significantly lower smear layer score than the control group and the EDDY group (P<0.01). In the curved segment, the mean depth of infiltration was significantly greater in the PUI group than in the control group (P<0.05); the tarnish layer score was lower in each experimental group than in the control group. At the top, the mean depth of infiltration was greater in the PUI and PIPS groups than in the control group (P<0.05), and the smear layer score was lower in the PIPS group than in the other groups (P<0.05). After the time was changed, the depth of infiltration of PUI increased only in the apical segment as the flushing time increased. CONCLUSIONS The PUI and PIPS methods facilitate the penetration of irrigation solution into the dentin canal in curved root canals, especially in the apical segment. The PIPS technique is effective in removing the smear layer in curved root canals.
Humans ; Dental Pulp Cavity ; Microscopy, Electron, Scanning ; Root Canal Irrigants ; Root Canal Preparation/methods* ; Smear Layer ; Sodium Hypochlorite ; Therapeutic Irrigation/methods* ; Double-Blind Method

Epithelial root sheath plays a key role in guiding the development of tooth root. Any problems during its growth can lead to various forms of defects or abnormalities in the development of tooth root. Radicular invaginatus may occur when the epithelial root sheath excessively proliferates and infolds into the dental papilla. In terms of tissue origin and occurrence mechanism, the radicular dens invaginatus is similar to the coronal invaginatus which is led by the proliferation and infolding of enamel organ. However, there had been no consensus on the term and classification of this type of developmental abnormality as well as the relationships among the dens invaginatus, the radicular invaginatus and the palatogingival groove. From the role of epithelial root sheath during root development, the manifestations of root developmental defects and abnormalities will be analyzed. The pathogeny, classification, clinical characteristics of the radicular invaginatus, the relationship with the dens invaginatus and the impact on treatment were specially focused on.
Humans ; Root Canal Therapy ; Dens in Dente/therapy*