In recent years, the petroleum-based plastic pollution problem has been causing global attention. The idea of "degradation and up-cycling of plastics" was proposed for solving the environmental pollution caused by non-degradable plastics. Following this idea, plastics would be firstly degraded and then reconstructed. Polyhydroxyalkanoates (PHA) can be produced from the degraded plastic monomers as a choice to recycle among various plastics. PHA, a family of biopolyesters synthesized by many microbes, have attracted great interest in industrial, agricultural and medical sectors due to its biodegradability, biocompatibility, thermoplasticity and carbon neutrality. Moreover, the regulations on PHA monomer compositions, processing technology, and modification methods may further improve the material properties, making PHA a promising alternative to traditional plastics. Furthermore, the application of the "next-generation industrial biotechnology (NGIB)" utilizing extremophiles for PHA production is expected to enhance the PHA market competitiveness, promoting this environmentally friendly bio-based material to partially replace petroleum-based products, and achieve sustainable development with carbon-neutrality. This review summarizes the basic material properties, plastic upcycling via PHA biosynthesis, processing and modification methods of PHA, and biosynthesis of novel PHA.
Polyhydroxyalkanoates ; Plastics ; Biotechnology ; Petroleum ; Carbon

OBJECTIVE: To review the research progress of natural biomaterial polyhydroxyalkanoate (PHA) in orthopedics. METHODS: The literature concerning PHA devices for bone defects, bone repair, and bone neoplasms, respectively, in recent years was extensively consulted. The three aspects of the advantages of PHA in bone repair, the preparation of PHA medical devices for bone repair and their application in orthopedics were discussed. RESULTS: Due to excellent biodegradability, biocompatibility, and potential osteoinduction, PHA is a kind of good bone repair material. In addition to the traditional PHA medical implants, the use of electrostatic spinning and three-dimensional printing can be designed to various functional PHA medical devices, in order to meet the orthopedic clinical demands, including the bone regeneration, minimally invasive bone tissue repair by injection, antibacterial bone repair, auxiliary establishment of three-dimensional bone tumor model, directed osteogenic differentiation of stem cells, etc. CONCLUSION At present, PHA is a hotspot of biomaterials for translational medicine in orthopedics. Although they have not completely applied in the clinic, the advantages of repair in bone defects have been gradually reflected in tissue engineering, showing an application prospect in orthopedics.
Orthopedics ; Osteogenesis ; Arthrodesis ; Anti-Bacterial Agents ; Biocompatible Materials ; Polyhydroxyalkanoates/therapeutic use*

OBJECTIVE: To construct polyhydroxyalkanoate (PHA) microspheres loaded with bone morphogenetic protein 2 (BMP-2) and human β-defensin 3 (HBD3), and evaluate the antibacterial activity of microspheres and the effect of promoting osteogenic differentiation, aiming to provide a new option of material for bone tissue engineering. METHODS: The soybean lecithin (SL)-BMP-2 and SL-HBD3 were prepared by SL-mediated introduction of growth factors into polyesters technology, and the functional microsphere (f-PMS) containing BMP-2 and HBD3 were prepared by microfluidic technology, while pure microsphere (p-PMS) was prepared by the same method as the control. The morphology of microspheres was observed by scanning electron microscopy and the water absorption was detected; the release curves of BMP-2 and HBD3 in f-PMS were detected by ELISA kit. The antibacterial effect of microspheres in Staphylococcus aureus and Escherichia coli was tested with the LIVE/DEAD^TM BacLight^TM bacterial staining kit; the biocompatibility of microspheres was tested using Transwell and cell counting kit 8 (CCK-8). The effect of microspheres on osteogenic differentiation was determined by collagen type Ⅰ (COL-1) immunofluorescence staining and alkaline phosphatase (ALP) concentration. RESULTS: In this experiment, the f-PMS and p-PMS were successfully constructed. Morphological characteristics showed that p-PMS surface was rough and distributed with micropores of 1-3 μm, while f-PMS surface was smooth and existed white granular material. There was no significant difference in water absorption between the two groups (P>0.05). The release curves of BMP-2 and HBD3 in the f-PMS and p-PMS were basically the same, showing both early sudden release and late slow release. The antibacterial activity of f-PMS was significantly higher than that of p-PMS in the test that against Staphylococcus aureus and Escherichia coli (P<0.05), but there was no significant difference in biocompatibility between the two groups (P>0.05). The results of osteogenic differentiation of human BMSCs showed that the fluorescence intensity of osteogenic specific protein COL-1 of f-PMS was significantly higher than that in p-PMS, and the activity of ALP in f-PMS was also significantly higher than that in p-PMS (P<0.05). CONCLUSION The p-PHA have good antibacterial activity and biocompatibility, and can effectively promote the osteogenic differentiation of human BMSCs, which is expected to be applied to bone tissue engineering in the future.
Humans ; Osteogenesis ; Polyhydroxyalkanoates ; Microspheres ; Alkaline Phosphatase ; Anti-Bacterial Agents/pharmacology* ; Coloring Agents ; Escherichia coli

Polyhydroxyalkanoate depolymerase (PHAD) can be used for the degradation and recovery of polyhydroxyalkanoate (PHA). In order to develop a PHAD with good stability under high temperature, PHAD from Thermomonospora umbrina (TumPHAD) was heterelogously expressed in Escherichia coli BL21(DE3). At the same time, a mutant A190C/V240C with enhanced stability was obtained via rational design of disulfide bonds. Characterization of enzymatic properties showed that the mutant A190C/V240C had an optimum temperature of 60 ℃, which was 20 ℃ higher than that of the wild type. The half-life at 50 ℃ was 7 hours, at 50 ℃ which was 21 times longer than that of the wild type. The mutant A190C/V240C was used for the degradation of polyhydroxybutyrate (PHB), one of the typical PHA. At 50 ℃, the degradation rate of PHB being treated for 2 hours and 12 hours was 2.1 times and 3.8 times higher than that of the wild type, respectively. The TumPHAD mutant A190C/V240C obtained in this study shows tolerance to high temperature resistance, good thermal stability and strong PHB degradation ability, which may facilitate the degradation and recovery of PHB.
Thermomonospora ; Actinomycetales ; Escherichia coli/genetics* ; Polyhydroxyalkanoates

Halomonas can grow on diverse carbon sources. As it can be used for unsterile fermentation under high-salt conditions, it has been applied as a chassis for next-generation industrial biotechnology. Short-chain volatile fatty acids, including acetate, propionate, and butyrate, can be prepared from biomass and are expected to be novel carbon sources for microbial fermentation. Halomonas sp. TD01 and TD08 were subjected to shaking culture with 10-50 g/L butyrate, and they were found to effectively synthesize poly-3-hydroxybutyrate with butyrate as the carbon source. The highest yield of poly-3-hydroxybutyrate was achieved at butyrate concentration of 20 g/L (9.12 g/L and 7.37 g/L, respectively). Butyrate at the concentration > 20 g/L inhibited cell growth, and the yield of poly-3-hydroxybutyrate decreased to < 4 g/L when butyrate concentration was 50 g/L. Moreover, Halomonas sp. TD08 can accumulate the copolymer of 3-hydroxybutyrate and 3-hydroxyvalerate by using propionate and butyrate as carbon sources. However, propionate was toxic to cells. To be specific, when 2 g/L propionate and 20 g/L butyrate were simultaneously provided, cell dry weight and polymer titer were 0.83 g/L and 0.15 g/L, respectively. The addition of glycerol significantly improved cell growth and boosted the copolymer titer to 3.95 g/L, with 3-hydroxyvalerate monomer content of 8.76 mol%. Short-chain volatile fatty acids would be promising carbon sources for the production of polyhydroxyalkanoates by Halomonas.
Butyrates ; Carbon ; Fatty Acids, Volatile ; Halomonas ; Polyhydroxyalkanoates ; Propionates

Polyhydroxyalkanoates (PHA) synthesis by activated sludge using volatile fatty acids (VFAs) in fermentation liquid of excess sludge as carbon source is a hotspot in the field of environmental biotechnology. However, there is no unified conclusion on the effects of non-VFAs, mainly dissolved organic matter (DOM), on PHA production. Thus, this critical review mainly introduces the main characteristics and common analysis methods of DOM in anaerobic fermentation liquid. The effects of DOM on PHA production are analyzed from the aspects of microbiology, metabolic regulation and sludge properties. The results of different studies showed that high concentration of DOM is bad for PHA production, but an appropriate amount of DOM is conducive to the stability of sludge properties, reducing the final PHA purification cost. Finally, suitable strategies were proposed to regulate the PHA synthesis by activated sludge with DOM for PHA production by anaerobic fermentation liquid.
Anaerobiosis ; Bioreactors ; Fatty Acids, Volatile ; Fermentation ; Polyhydroxyalkanoates ; Sewage

Polyhydroxyalkanoates (PHAs) have obtained much attention in biomaterial fields due to their similar physicochemical properties to those of the petroleum-derived plastics. Poly(3-hydroxybutyrate-co-lactate) [P(3HB-co-LA)] is one member of the PHAs family, and has better toughness and transparency compared to existing polylactic acid (PLA) and poly[(R)-3-hydroxybutyrate] [P(3HB)]. First, we confirmed the one-step biosynthesis of P(LA-co-3HB) with the lactate fraction of 23.8 mol% by introducing P(3HB-co-LA) production module into Escherichia coli MG1655. Then, the lactate fraction was increased to 37.2 mol% in the dld deficient strain WXJ01-03. The genes encoding the thioesterases, ydiI and yciA, were further knocked out, and the lactate fraction in the P(3HB-co-LA) was improved to 42.3 mol% and 41.1 mol% respectively. Strain WXJ03-03 with dld, ydiI and yciA deficient was used for the production of the LA-enriched polymer, and the lactate fraction was improved to 46.1 mol%. Notably, the lactate fraction in P(3HB-co-LA) from xylose was remarkably higher than from glucose, indicating xylose as a potent carbon source for P(3HB-co-LA) production. Therefore, the deficiency of thioesterase may be considered as an effective strategy to improve the lactate fraction in P(3HB-co-LA) in xylose fermentation.
Escherichia coli/genetics* ; Hydroxybutyrates ; Lactic Acid ; Polyesters ; Polyhydroxyalkanoates ; Xylose

Polyhydroxyalkanoates (PHAs) are polymers obtained by esterification of hydroxy fatty acid monomers. Due to similar mechanical characteristics of traditional petroleum-based plastics, 100% biodegradability and biocompatibility, PHAs are considered to be one of the most potential green materials. However, the application and promotion of PHAs as a green and environmentally friendly material are difficult because of the high production costs. This article focuses on the current methods to reduce production cost of PHAs effectively, such as cell morphology regulation, metabolic pathway construction, economic carbon source utilization and open fermentation technology development. Despite most research results are still limited in laboratory, the research methods and directions provide theoretical guidance for the industrial production of economic PHAs.
Fermentation ; Industry ; Petroleum ; Plastics ; Polyhydroxyalkanoates

Polyhydroxyalkanoate (PHA) is a family of biodegradable polyesters synthesized by microorganisms. It has various monomer structures and physical properties with broad application prospects. However, its large-scale production is still hindered by the high cost. In the past 30 years, metabolic engineering approach has been used to tune the metabolic flux, engineer and introduce pathways. The efficiency of PHA synthesis by microorganisms has been significantly improved, and the diversity of PHA monomer, structure and substrate have also been enriched. Meanwhile, by changing cell morphology and PHA particle size, more efficient downstream production process has achieved and PHA production costs have been reduced. In recent years, "Next generation industrial biotechnology" (NGIB) based on extremophiles, especially halophilic Halomonas spp., has been rapidly developed. NGIB has achieved the opening and continuous production of PHA, which simplifies the production process and saves energy and fresh water. Combined with metabolic engineering, Halomonas spp. can be transformed into low-cost production platform of numerous PHA. It is expected to improve the market competitiveness and promote the commercialization of PHA.
Biotechnology ; Halomonas/genetics* ; Metabolic Engineering ; Polyesters ; Polyhydroxyalkanoates

Polyhydroxyalkanoate (PHA) is a representative biodegradable polymer with more than 150 varieties and various properties. This article reviews the research status and potential applications of PHA, and introduces the properties of four-generation commercial PHA and its research progress in blend fibers with other biodegradable materials.
Biodegradable Plastics ; chemistry ; standards ; Materials Science ; trends ; Polyhydroxyalkanoates ; chemistry