Objective: To investigate the shape and position changes of temporomandibular joint (TMJ) in adult skeletal class Ⅱ malocclusion with high angle patients after vertical mandibular control, and the correlation between vertical mandibular changes and condylar position changes. Methods: Twenty adult skeletal class Ⅱ malocclusion with high angle patients [6 males and 14 females, aged (21.4±2.4) years] who underwent extraction treatment and active vertical control in the Department of Orthodontics, Lanzhou University Stomatological Hospital from October 2017 to November 2020 were selected. Cone-beam CT data of the patient before and after treatment were imported into Invivo Dental 5.0 software for three-dimensional reconstruction and correction, and the vertical index of mandible in reconstructed lateral cephalogram (mandibular plane angle, posterior anterior height ratio, mandibular true rotation angle) were measured. Incisal angle and variables of condyle shape, position and articular fossa shape were measured. Paired t test was performed on the results before and after treatment, and the correlation between mandibular vertical changes and condylar position changes was determined by Pearson correlation coefficient calculation. Results: After treatment, the overbite and overjet were within normal range, and the vertical height of the molars was controlled. Compared with the measurement before treatment, mandibular plane angle and mandibular true rotation angle were decreased by 2.05°±1.22° (t=7.60, P<0.001) and 1.42°±1.92° (t=3.54, P=0.002), respectively. The posterior anterior height ratio was increased by (1.89±3.32)% (t=2.56, P=0.019). After treatment, the mediolateral diameter of condyle, the anteroposterior diameter of condyle, the maximum cross-sectional area of condyle, the height of condyle head, the width of articular fossa, the depth of articular fossa and the articular nodular angle were increased by (0.55±0.76) mm (t=-2.73, P=0.015), (0.27±3.51) mm (t=-3.23, P=0.006), (6.01±7.36) mm² (t=-2.80, P=0.013), (0.33±0.72) mm (t=-2.14, P=0.046), (0.56±0.93) mm (t=-2.37, P=0.032), 0.33 (0.14, 0.51) mm (Z=-2.76, P=0.006) and 1.50°±2.40° (t=-2.44, P=0.028), respectively. The internal condylar space and the external condylar space were decreased by (0.33±0.49) mm (t=2.31, P=0.035) and (0.20±0.23) mm (t=3.58, P=0.003), respectively. Before orthodontic treatment, 6 patients were with anterior displacement of the condyle, 7 patients with central position of the condyle, and 7 patients with posterior displacement of the condyle. After correction, patients who were with central position of the condyle have not changed much. The posterior displaced condyle in 2 patients and anterior displaced condyle in 3 patients became in central position after treatment. The joint space index was closer to the central position in 3 patients with anterior displacement and 3 patients with posterior displacement. The position of condyle in 1 patient with posterior displacement and 1 patient with anterior displacement remained basically unchanged. There was a significant negative correlation between the change of the posterior-anterior height ratio and the change of the internal condylar space in patients (r=-0.52, P=0.019), and a low correlation with the contral condylar space and the external condylar space(r=-0.48, P=0.031; r=-0.47, P=0.035). Conclusions: Skeletal class Ⅱ malocclusion with high angle adult patients achieved normal overbite and overjet and remodeling of condyle and articular fossa occurred after orthodontic treatmnet and vertical control. There was a certain negative correlation between the change of posterior-anterior height ratio and the change of condylar position.
Adult ; Female ; Humans ; Male ; Cone-Beam Computed Tomography ; Malocclusion, Angle Class II/diagnostic imaging* ; Mandible/diagnostic imaging* ; Mandibular Condyle/diagnostic imaging* ; Overbite ; Temporomandibular Joint/diagnostic imaging*

OBJECTIVE: To analyze the etiological and clinical characteristics of oral emergency patients under 18 years with dental trauma, and to provide guidance on the prevention and treatment in children and adolescents. METHODS: A retrospective study on the intact data of the dental trauma patients under 18 years from January 2016 to December 2018 in the Department of Oral Emergency in Peking University School of Stomatology was conducted, and the distribution of the patients' gender, age and visiting time, as well as the number and position of traumatic teeth, diagnostic classification, and multiple injury with dental trauma were analyzed. RESULTS: During the period, 54.2% of the first visit dental trauma patients (10 164) were children or adolescents (5 506). The two peak ages were 3-4 and 7-9 years. The incidence of the male was higher than the female in every age group (Wilcoxon test, P < 0.001). From May to June and September to November, there were more cases of dental trauma. The peak time of daily dental trauma cases was from 19:00 to 20:00 (Jonckheere-Terpstra test, P < 0.001). The positions of traumatic teeth in both sides were approximate symmetrical, and maxillary central incisors were the most affected. 52.3% of the patients suffered multiple teeth injuries. Among the permanent teeth trauma, enamel and dentin fracture was the most common (24.7%), followed by concussion (20.5%), sub-luxation (17.9%) and complicated crown fracture (14.4%). And among the primary teeth trauma, subluxation was the most common (31.1%), followed by concussion (14.5%) and lateral luxation (9.5%). 19.7% of the children and adolescent dental trauma patients were also suffered maxillofacial soft or hard tissue injury. CONCLUSION The incidence of dental trauma in children and adolescents is higher than that in adults. There were two age peaks among the children and adolescents patients. Primary teeth and young permanent teeth were usually suffered. Clinical treatment should be considered along with the characteristics of child tooth growth. In order to prevent the occurrence of dental trauma, early orthodontic intervention should be carried out in children with severe overjet. Families, schools and nursery institutions should strengthen the protection against dental trauma.
Adolescent ; Adult ; Child ; Female ; Humans ; Incisor ; Male ; Overbite ; Retrospective Studies ; Tooth Avulsion ; Tooth Fractures/epidemiology* ; Tooth Injuries/epidemiology*

The loss of posterior support and the abnormal jaw relation can cause pathologic findings. If deep bite patients with multiple missing teeth, can not have the stable posterior contact, the mandible moves posteriorly, and consequently the overjet and overbite get worse. And when the mandibular irregular occlusal plane is corrected, it is easier to have the bilateral balanced occlusion with the maxilla. So the treatment goal is to give proper posetrior support and establish appropriate anterior guidance, and ultimately provide improved mastication and esthetics recovery. In this case, a 68 year old man, having deep bite without posterior support was evaluated by the vertical dimesion decision flow-chart. An available prosthetic height, anterior occlusal relation such as overjet, overbite and the esthetic part such as facial height and the cephalometric analysis are the factors to be considered.
Dental Occlusion ; Esthetics ; Humans ; Jaw ; Mandible ; Mastication ; Maxilla ; Mouth Rehabilitation ; Mouth ; Overbite ; Tooth ; Vertical Dimension

A proper vertical dimension and a harmonious occlusal plane are essential to satisfy a patient esthetically and functionally. A maxillomandibular occlusal vertical dimension is determined by the elevators which repeatedly contracts to a certain length, and a tooth location is determined by a maxillomandibular vertical dimension. The patient of this case came in with the incongruity of the lips and the occlusal plane. The result of clinical test showed the lack of length of the lower anterior due to the reduction of vertical dimension, the deep overbite of anterior, the excessive attrition of anterior, and the incongruity of occlusal plane. After the diagnostic wax-up, the temporary restoration was installed, and final prosthesis was installed after 6 months. As a result, the patient obtained a functionally and esthetically satisfying result.
Dental Occlusion ; Elevators and Escalators ; Humans ; Lip ; Overbite ; Prostheses and Implants ; Rehabilitation ; Tooth ; Vertical Dimension

Vertical facial growth triggers the rotation of mandible to move the chin point to the downward and backward direction, which showed remarkably effective result making the less prominent chin. Recently, the intraoral removable appliance utilizing class III elastic demonstrated the vertical growth trigger mechanism. The treatment change was very fast and wearing was quite easy, compared to extraoral appliances.The purpose of this study was to verify the duration of the treatment on class III malocclusion using intraoral removable appliances, which designed to accelerate vertical facial growth.56 patients were selected with the complaint of the protruded mandible and class III malocclusion (overjet : −3 – 0 mm, overbite : 0 – 4 mm). Information like; age at start, duration of the treatment events, type of the treatment, overjet, overbite etc. was collected and calculated.The average age of the patients delivering the initial brace was 8.75 ± 1.10 year. Most of the anterior crossbite was resolved within 6 months. The total treatment period was 21.79 ± 10.73 months with the additional procedures like the alignment of anterior teeth and torque control using additional removable and fixed orthodontic appliances. The correlation study showed that patient's cooperation (p = 0.000) and the use of fixed appliance (p = 0.032) were significantly influenced on treatment duration.
Braces ; Chin ; Humans ; Malocclusion ; Mandible ; Orthodontic Appliances ; Overbite ; Statistics as Topic ; Tooth ; Torque

Excessive tooth wear can cause irreversible damage to the occlusal surface and can alter the anterior occlusal relationship by destroying the structure of the anterior teeth needed for esthetics and proper anterior guidance. The anterior deep bite is not a morbid occlusion by itself, but it may cause problems such as soft tissue trauma, opposing tooth eruption, tooth wear, and occlusal trauma if there are no stable occlusal contacts between the lower incisal edge against its upper lingual surface. The most important goal of treatment is to form stable occlusal contact in centric relation. In this case report, patients with decrease in vertical dimension and anterior deep bite due to maxillary posterior tooth loss and excessive tooth wear were treated full mouth rehabilitation with increased vertical dimension to regain the space for restoration and improve anterior occlusal relationship and esthetics. The functional and aesthetic problems of the patient could be solved by the equal intensity contact of all the teeth in centic relation (CR), anterior guidance in harmony with the functional movement, and restoration of the wear surface beyond the enamel range.
Centric Relation ; Dental Enamel ; Esthetics ; Humans ; Mouth Rehabilitation ; Mouth ; Overbite ; Tooth Eruption ; Tooth Loss ; Tooth Wear ; Tooth ; Vertical Dimension

OBJECTIVE: To establish a series of three-dimensional measurement methods of nasolabial soft tissue for maxillary protrusion patients by using 3dMD camera, and to evaluate preoperative and postoperative changes of the nasolabial soft tissue. METHODS: Three-dimensional facial photos of 30 female patients with maxillary protrusion [average age, (27.33±2.54) years] were taken by 3dMD camera preoperatively and at the end of postoperative 6 months or more. Then, 3dMD patient software was used to locate the selected landmarks at nasolabial region on the three-dimensional photos. Ten measurements, including soft tissue line distance, angle, curve distance and postoperative three-dimensional volume changes were measured twice with one week interval by 3 investigators, respectively. A standard consistency test calculated by the correlation coefficients (ICC) was performed between two sets of data (including all of the 10 measurements) for each investigator and among the three investigators to verify the repeatability. RESULTS: The average maxillary incisor retraction distance of the 30 subjects was (5.13±0.99) mm, and the average follow-up time was (11.07±5.11) months. The standard consistency test was performed between the two sets of data for each investigator, and the correlation coefficients (ICC) of the 10 measurements were all over 0.8 for each investigator (P>0.05). The standard consistency test was performed among the three surveyors, with the result that the ICC of the width of the bilateral inner canthus, the height of the nose, the height of nasal tip, nasolabial angle, philtrum length, the curve height of upper vermilion and the height of upper lip were greater than 0.8 (P>0.05), and the ICC of the distance between SbalSbal, length of nasal dorsum and three-dimensional volume change of upper lip were 0.680, 0.627 and 0.528, respectively (P>0.05). CONCLUSION 3dMD camera and 3dMD patient software can be used to measure and analyze the three-dimensional morphology of the nasolabial soft tissue for patients with maxillary protrusion preoperatively and postoperatively, and it is relatively accurate and reliable. However, the repeatability of three-dimensional positioning of the nasal tip point and the Sbal is slightly worse resulting in the lower value of the ICC of the distance between SbalSbal and length of nasal dorsum, as well as the upper lip three-dimensional volume change after the operation.
Adult ; Cephalometry ; Face ; Female ; Humans ; Imaging, Three-Dimensional ; Lip ; Maxilla ; Nose ; Overbite ; Young Adult

The purpose of this case report was to introduce the concept of orthodontic and orthopedic treatment for a growing patient with Tessier number 0 cleft. A 5-year-old boy patient with Tessier number 0 cleft presented congenitally missing maxillary central incisors (MXCI), a bony defect at the premaxilla, a constricted maxillary arch, an anterior openbite, and maxillary hypoplasia. His treatment was divided into three stages: management of the bony defect at the premaxilla and the congenitally missing MXCIs using a fan-type expansion plate, iliac bone grafting, and eruption guidance of the maxillary lateral incisors into the graft area for substitution of MXCIs; management of the maxillary hypoplasia using sequential facemask therapy with conventional and skeletal anchorage; and management of the remaining occlusal problems using fixed orthodontic treatment. The total treatment duration was 15 years and 10 months. Class I canine and Class II molar relationships and normal overbite and overjet were achieved at the end of treatment. Although the long-term use of facemask therapy resulted in significant protraction of the retrusive maxilla, the patient exhibited Class III profile because of continued mandibular growth. However, the treatment result was well maintained after 2 years of retention. The findings from this case suggest that interdisciplinary and customized approaches are mandatory for successful management of maxillary hypoplasia, bony defect, and dental problems in Tessier number 0 cleft. Moreover, considering the potential of orthognathic surgery or distraction osteogenesis, meticulous monitoring of mandibular growth until growth completion is important.
Bone Transplantation ; Child, Preschool ; Humans ; Incisor ; Male ; Maxilla ; Molar ; Open Bite ; Orthognathic Surgery ; Orthopedics* ; Osteogenesis, Distraction ; Overbite ; Transplants

The collapse of the posterior occlusion destroys the normal occlusal plane and causes excessive wear reducing the vertical dimension. Reduced vertical dimension of occlusion causes not only aesthetic and functional problems but also overloading on the temporomandibular joints and abnormalities of muscle nerve system. In order to improve the collapsed occlusal relationship, it is necessary to consider the change of the vertical dimension. It is necessary to make a precise diagnosis and analysis before the treatment and to evaluate the adaption of patient to the new vertical dimension of occlusion. A patient with excessive overbite often has occlusal problems of tooth wear and tooth eruption. Considering these considerations, overall prosthodontic restoration is required to solve the problem. A patient of 68 year old man in this case who suffered major tooth wear and maxillary posterior teeth loss was treated with elevation of vertical dimension of occlusion by maxillary removable dental prosthesis and mandibular fixed prosthesis.
Dental Occlusion ; Dental Prosthesis ; Diagnosis ; Humans ; Mouth Rehabilitation ; Mouth ; Overbite ; Prostheses and Implants ; Temporomandibular Joint ; Tooth Eruption ; Tooth Wear ; Tooth ; Vertical Dimension

OBJECTIVE: This study was performed to investigate the changes in alveolar bone after maxillary incisor intrusion and to determine the related factors in deep-bite patients. METHODS: Fifty maxillary central incisors of 25 patients were evaluated retrospectively. The maxillary incisors in Group I (12 patients; mean age, 16.51 ± 1.32 years) were intruded with a base-arch, while those in Group II (13 patients; mean age, 17.47 ± 2.71 years) were intruded with miniscrews. Changes in the alveolar envelope were assessed using pre-intrusion and post-intrusion cone-beam computed tomography images. Labial, palatal, and total bone thicknesses were evaluated at the crestal (3 mm), midroot (6 mm), and apical (9 mm) levels. Buccal and palatal alveolar crestal height, buccal bone height, and the prevalence of dehiscence were evaluated. Two-way repeated measure ANOVA was used to determine the significance of the changes. Pearson's correlation coefficient analysis was performed to assess the relationship between dental and alveolar bone measurement changes. RESULTS: Upper incisor inclination and intrusion changes were significantly greater in Group II than in Group I. With treatment, the alveolar bone thickness at the labial bone thickness (LBT, 3 and 6 mm) decreased significantly in Group II (p < 0.001) as compared to Group I. The LBT change at 3 mm was strongly and positively correlated with the amount of upper incisor intrusion (r = 0.539; p = 0.005). CONCLUSIONS: Change in the labial inclination and the amount of intrusion should be considered during upper incisor intrusion, as these factors increase the risk of alveolar bone loss.
Alveolar Bone Loss ; Cone-Beam Computed Tomography ; Humans ; Incisor* ; Overbite ; Prevalence ; Retrospective Studies