Diabetic foot (DF) is one of the most serious chronic complications of diabetes. The incidence rate among global diabetes patients is as high as 15% to 25%, and about 50% of patients will develop contralateral foot ulcers within 5 years after the first unilateral ulcer. As a non-invasive prevention and control solution, the application progress of functional insoles is mainly reflected in the following aspects:(1) Material innovation. The application of new composite materials and smart materials has significantly enhanced the pressure reduction effect and comfort. (2) Structural optimization. The development of multi-layer design and local pressure reduction structure has achieved more precise pressure distribution regulation. (3) Manufacturing process. 3D printing and parametric design have enabled the personalized customization of functional insoles. (4) Intelligent monitoring. It integrates functions such as pressure sensing and temperature monitoring, achieving real-time monitoring and early warning of foot conditions. Clinical research has confirmed that personalized functional insoles could reduce the incidence of foot ulcers and shorten the healing time of ulcers. At present, the research hotspots mainly focus on the development of smart materials, the construction of multi-functional integration and remote monitoring systems. However, in-depth research is still needed in the aspects of biomechanical mechanisms, standardized evaluation systems and long-term efficacy assessment. The development of future functional insoles should focus on the coordinated advancement of "personalization-intelligence-standardization", with the aim of providing more effective solutions for the prevention and treatment of DF.
Humans ; Diabetic Foot/therapy* ; Foot Orthoses

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

OBJECTIVE: To explore clinical effect of high-intensity laser therapy(HILT) combined with targeted hand function training on pain and lateral pinch force in grade 1-2 thumb carpometacarpal(CMC) osteoarthritis(OA). METHODS: From April 2020 and April 2022, 42 female patients with thumb CMC OA grade 1 to 2, aged from 58 to 80 years old with an everage of (68.90±7.58) years old were divided into observation group of 21 patients who received HILT and targeted hand function training for 4 weeks, and 21 patients in control group who received ultrashort wave therapy combined with using of an orthosis for 4 weeks. Visual analogue scale(VAS) was applied to evaluate degree of pain, function of finger was evaluated by dynamometer to measure lateral pinch force at baseline, immediately following intervention at 4 and 12 weeks following intervention. RESULTS: VAS and lateral pinch force at immediately and 12 weeks after intervention betwwen two groups were better than that of before intervention(P<0.05). Compared with control group, the degree of pain in observation group improved more(immediately after intervention t=3.37, P<0.05, 12 weeks after intervention t=9.05, P<0.05), lateral pinch force higher than that of control group (immediately after intervention t=-2.55, P<0.05, 12 weeks after intervention t=9.51, P<0.05). CONCLUSION High-intensity laser therapy combined with targeted hand function training is more effective than traditional methods in improving pain and lateral pinch force in grade 1-2 thumb carpometacarpal osteoarthritis.
Humans ; Female ; Middle Aged ; Aged ; Aged, 80 and over ; Thumb ; Laser Therapy ; Braces ; Osteoarthritis/therapy* ; Pain

OBJECTIVE: To investigate the clinical effect of Kinesio Taping combined with electroacupuncture in the treatment of Bigliani typeⅠsubacromial impingement syndrome. METHODS: From January 2019 to June 2021, 82 cases with Bigliani typeⅠsubacromial impingement syndrome were selected and divided into treatment group and control group. Treatment group included 41 cases, 23 males and 18 females, aged from 20 to 52 years old, with an average of (39.31±5.80)years old. There were 12 cases on left shoulder and 29 cases on right shoulder. The course of disease was from 3.2 to 35.4 months. The treatment group was treated with Kinesio Taping and electroacupuncture. In control group, there were 41 cases, including 22 males and 19 females, aged from 19 to 53 years old with an average of (40.67±6.13) years old, 30 cases on right shoulder, 11 cases on left shoulder. The courses of disease was from 3.0 to 36.0 months. The control group was treated with simple shoulder electroacupuncture. Patients in both groups were treated with electroacupuncture 3 times a week for 3 weeks. After each electroacupuncture treatment in the treatment group, the Kinesio Taping was applied immediately and kept for 2 days. Before treatment, immediately after treatment, and after 1, 3, 8 weeks, the shoulder joint Constant-Murley score, pain visual analogue scale (VAS), and shoulder joint range of motion were used to evaluate the treatment effect. RESULTS: After 1 week of treatment, there was 1 patient in treatment group refused treatment due to hypersensitivity to Kinesio Taping, 1 patient in control group was allergic to the metal needle and refused treatment. And the other 80 patients completed all treatment. Immediately after treatment, and 1, 3, and 8 weeks after treatment, VAS of treatment group were (2.06±1.03), (2.74±1.66), (3.28±1.04), and (3.90±0.12) points, respectively. The Constant-Murley scores of shoulder joint were(86.41±3.52), (82.44±3.14), (80.46±2.54), (76.97±2.01) points. VAS of control group were(3.35±0.41), (3.08±0.92), (3.77±0.67), (3.96±1.04) points, and the Constant-Murley scores of the shoulder joint were(75.82±2.73), (74.72±1.53), (73.66±1.53), (70.68±1.95) points respectively. Immediately after treatment, VAS, Constant-Murley score, and shoulder range of motion between two groups were better than those of before treatment (P<0.05), and the difference was statistically significant between two groups after treatment (P<0.05). One week after treatment, VAS, Constant-Murley score, and shoulder joint range of motion between two groups were better than those of before treatment (P<0.05), but there was no significant difference in VAS between two groups (P>0.05). There were significant differences in the Constant-Murley score and shoulder range of motion between two groups (P<0.05). At 3 and 8 weeks after treatment, VAS, Constant-Murley score, and the range of motion of shoulder joints between two groups were better than those of before treatment (P<0.05), but there was no significant difference between two groups(P>0.05). CONCLUSION The treatment for bigliani typeⅠsubacromial impingement syndrome with Kinesio Taping combined with electroacupuncture can reduce pain, effectively improve the function of shoulder joint. In addition, with Kinesio Taping protection when motion, the patients sports ability can be improved obviously, with good immediate effect, and no trauma. If the patients are willing to accept it, it would be an immediate and effective treatment.
Male ; Female ; Humans ; Young Adult ; Adult ; Middle Aged ; Electroacupuncture ; Athletic Tape ; Shoulder Impingement Syndrome/therapy* ; Range of Motion, Articular ; Pain Measurement ; Treatment Outcome

A micro silicone oil liquid spring was designed and manufactured in this article. The performance of the liquid spring was studied by simulation analysis and mechanical test. A self-force source power-assisted knee orthosis was designed based on the liquid spring. This power-assisted knee orthosis can convert the kinetic energy of knee flexion into the elastic potential energy of liquid spring for storage, and release elastic potential energy to generate assisted torque which drives the knee joint for extension. The results showed that the average maximum reset force of the liquid spring was 1 240 N, and the average maximum assisted torque for the knee joint was 29.8 N·m. A musculoskeletal multibody dynamic model was used to analyze the biomechanical effect of the knee orthosis on the joint during knee bending (90°knee flexion). The results showed that the power-assisted knee orthosis could effectively reduce the biomechanical load of the knee joint for the user with a body weight of 80 kg. The maximum forces of the femoral-tibial joint force, patellar-femoral joint force, and quadriceps-ligament force were reduced by 24.5%, 23.8%, and 21.2%, respectively. The power-assisted knee orthosis designed in this article provides sufficient assisted torque for the knee joint. It lays a foundation for the subsequent commercial application due to its small size and lightweight.
Biomechanical Phenomena ; Knee Joint ; Femur ; Ligaments ; Orthotic Devices

BACKGROUND: Scoliosis secondary to neurofibromatosis type 1 (NF1) in children aged <10 years is an important etiology of early-onset scoliosis (EOS). This study was performed to investigate the curve evolution of patients with EOS secondary to NF1 undergoing bracing treatment and to analyze high-risk indicators of rapid curve progression. METHODS: Children with EOS due to NF1 who underwent bracing treatment from 2010 to 2017 were retrospectively reviewed. The angle velocity (AV) at each visit was calculated, and patients with rapid curve progression (AV of >10°/year) were identified. The age at modulation and the AV before and after modulation were obtained. Patients with (n = 18) and without rapid curve progression (n = 10) were statistically compared. RESULTS: Twenty-eight patients with a mean age of 6.5 ± 1.9 years at the initial visit were reviewed. The mean Cobb angle of the main curve was 41.7° ± 2.4° at the initial visit and increased to 67.1° ± 8.6° during a mean follow-up of 44.1 ± 8.5 months. The overall AV was 6.6° ± 2.4°/year for all patients. At the last follow-up, all patients presented curve progression of >5°, and 20 (71%) patients had progressed by >20°. Rapid curve progression was observed in 18 (64%) patients and was associated with younger age at the initial visit and a higher incidence of modulation change during follow-up (t = 2.868, P = 0.008 and <0.001, respectively). The mean AV was 4.4° ± 1.2°/year before modulation and 11.8° ± 2.7°/year after modulation (t = 11.477, P < 0.010). CONCLUSIONS Curve progression of >10°/year is associated with younger age at the initial visit, and modulation change indicated the occurrence of the rapid curve progression phase.
Braces ; Child ; Child, Preschool ; Disease Progression ; Humans ; Neurofibromatosis 1/complications* ; Retrospective Studies ; Scoliosis/diagnostic imaging* ; Treatment Outcome

A 3D printing based wrist orthosis device was developed. After collecting the contour information of the carpal and metacarpophalangeal joints of the patients with a 3D scanner, the wrist orthotics were designed to meet the individual needs of the patients according to the relevant requirements of biomechanics. Choose TPU (thermoplastic polyurethanes) materials for preparation of 3D printing. It can functionally assist the smart brace after stroke patients with hemiplegia early rehabilitation training, the use of orthoses carry MPU6050 inertial sensor, magnetometer, time module device such as a sensor and monitor its movements and record the training time, ensure safe efficient rehabilitation training, help patients return to a normal life as soon as possible.
Humans ; Orthotic Devices ; Printing, Three-Dimensional ; Stroke ; Wrist ; Wrist Joint

OBJECTIVE: To observe the clinical efficacy of Kinesio Taping combined with electroacupuncture in the treatment of patellofemoral disorder in middle-aged and elderly exercise enthusiasts. METHODS: From April 2018 to April 2020, 62 middle-aged and elderly exercisers with patellofemoral disorder were selected and divided into observation group and control group. In the observation group, there were 30 cases:12 males and 18 females, aged from 35 to 66 years old, with an average age of (48.32±6.80) years old. The observation group was treated with Kinesio Taping and electroacupuncture . In the control group, there were 32 cases:12 males and 20 females, aged from 35 to 67 years old, with an averageage of (48.67±8.13) years old. The patients in the control group was treated with knee electroacupuncture. All the patients in both groups were treated once every other day, 3 times a week, for a total of 4 weeks. The VAS pain score and knee Lysholm score before and after treatment were compared between the two groups before and after treatment, and statistical analysis was conducted. RESULTS: In the control group, 2 patients were not satisfied with the curative effect after 2 weeks of treatment and gave up treatment, while the remaining 60 patients completed all the treatments. After 4 weeks of treatment, the VAS and Lyshlom scores of the control group were 2.73±1.46 and 75.63±8.62 respectively;the VAS and Lyshlom scores of the observation group were 2.02±1.85 and 83.31±5.53 respectively;the VAS and Lyshlom scores of the observation group and the control group were better than those before treatment, and the Lyshlom scores of the observation group were better than those of the control group. CONCLUSION Kinesio Taping combined with electroacupuncture is aimed at patellofemoral disorderof middle-aged and elderly sports enthusiasts. It has little trauma, can relieve pain and has a fast onset speed, which is readily accepted by patients, and promotes the rehabilitation of knee joint function of patients, thus providing a favorable reference for the promotion in clinical application.
Adult ; Aged ; Athletic Tape ; Electroacupuncture ; Female ; Humans ; Knee Joint ; Male ; Middle Aged ; Patellofemoral Pain Syndrome ; Treatment Outcome

OBJECTIVE: To study and analyze the clinical effect of the self-developed new adjustable weight-bearing rehabilitation brace in the rehabilitation of the femoral intertrochanteric fracture after the operation of PFNA. METHODS: From July 2015 to June 2017, 62 patients with typeⅡ (Evans-Jensen classification) intertrochanteric fracture of femur were treated with PFNA internal fixation. There were 11 males and 19 females in the routine rehabilitation group, with an average age of (70.73± 6.09) years;17 males and 15 females in the brace rehabilitation group, with an average age of (71.25±6.60) years. Among them, the patients in the routine rehabilitation group recovered according to the routine method, and the patients in the support rehabilitation group used the self-developed new adjustable weight-bearing rehabilitation support of lower limbs to assist the early rehabilitation. The pain intensity(VAS score), weight-bearing of affected limb, clinical healing time of fracture, Harris score and complications were recorded and analyzed. RESULTS: Nine patients lost their visit half a year later, the other 53 patients were followed up for 9 to 18 months. The VAS score at 1, 3, 6 months after operation of brace rehabilitation group was lower than that of routine rehabilitation group(<0.05). The weight bearing of the limbs in the rehabilitation group was significantly higher than that in the conventional rehabilitation group(<0.05), but the clinical healing time of fracture in the brace rehabilitation group was shorter than that in the routine rehabilitation group(<0.05). In addition, the Harris score of the postoperativebrace rehabilitation group was better than that of the conventional rehabilitation group(<0.05). The incidence of complications was lower than that of the conventional rehabilitation group(=0.048). CONCLUSION In the rehabilitation of Evans Jensen typeⅡintertrochanteric fracture after PFNA internal fixation, the new self-developed adjustable weight-bearing rehabilitation brace can significantly relieve postoperative pain, regulate and moderately increase the stress stimulation at the fracture end, so as to promote fracture healing, accelerate the recovery of hip joint function, reduce the incidence of complications, and its clinical effect is safe and reliable.
Aged ; Bone Nails ; Braces ; Female ; Fracture Fixation, Intramedullary ; Hip Fractures ; Humans ; Lower Extremity ; Male ; Middle Aged ; Retrospective Studies ; Treatment Outcome ; Weight-Bearing

Gorham-Stout disease is characterized by massive osteolysis or "vanishing bone" on radiograph. Due to its rarity, no standard Physical Medicine and Rehabilitation (PM&R) management has been published. With this comes the dilemma of managing another case of vanishing right humerus in a 13 year-old male, right handed student, with normal growth and development. To date, this could be the third documented case in the Philippines, but the first with humeral involvement, and the first to manage using a customized humeral brace. The absence of the right humerus affects the bimanual overhead and tabletop activities of the patient, for which a custom-made humeral orthosis was provided to manage the limited activities. There were improvements in activities such as writing, card turning, stacking, and lifting objects of variable weights, as well as with hand dexterity as evidenced by the standardized hand function tests done prior and post brace fitting. Being a rare bone disease with no standard management and unpredictable course, cases are managed symptomatically. For this case of an absent humerus significantly affecting upper extremity function, orthotic management is one aspect that could be recommended to achieve positive functional outcomes.
Braces