In children, large odontogenic cysts affect adjacent anatomical structures as well as displace developing permanent teeth. Odontogenic cysts are treated via enucleation or marsupialization. This case reports a 5-year-old boy and a 10-year-old boy who have not only displaced 3 or more permanent teeth but also elevated the maxillary sinus floor due to the large size of the cyst in the maxillary anterior region. In both cases, marsupialization was selected to minimize complications. After marsupialization, a customized acrylic obturator, window opening, and orthodontic traction for eruption guidance were gradually attempted, and it showed a good prognosis, so we report these cases.

Restoring composite resins with the optimal shades for all primary teeth is a great challenge for pediatric dentists. A newly developed single-shade composite resin can exhibit a color similar to that of the surrounding tooth structure based on the structural color phenomenon. This study aims to evaluate the color adjustment potential (CAP) of a single-shade composite resin compared to conventional multi-shade composite resins in primary teeth. A single-shade composite resin and two conventional multi-shade composite resins were included in this study. Two types of specimens, a single specimen and a dual specimen, were evaluated. For single specimens, duplications of the primary second molar denture teeth were made using experimental composite resins. For dual specimens, cavities were prepared on the buccal surfaces of extracted primary second molars and restored with experimental composite resins. The L*, a*, and b* values were measured using a colorimeter for the extracted teeth and specimens. The mean ΔEab* values for single and dual specimens and CAP were calculated. Bonferroni post-hoc analysis was performed to confirm the statistical significance between the ΔEab* and CAP values of the experimental resins. Among the single specimens, the single-shade composite resin showed significantly higher ΔESingle compared to other composite resins (p < 0.0167). There was no significant difference between ΔEDual for all experimental resins. The single-shade composite resin showed highest CAP compared to other multi-shade composite resins. A single-shade composite resin exhibited the most prominent color adaptability compared to other conventional multi-shade composite resins for primary second molars. A single-shade composite resin can simplify shade matching and provide esthetic outcomes for the restoration of primary second molars.

A 3D-printed resin crown is a novel option for esthetic crown restoration for primary teeth, which are typically bonded with resin cement. The purpose of this study was to evaluate the bonding ability of a 3D printing resin and compare it with other indirect resin materials for crown fabrication. The shear bond strengths of two 3D printing resin materials, Graphy (GP) and NextDent (NXT), and two indirect resin materials, VIPI Block (VIPI) and MAZIC Duro (MZ), were compared in the study. For all materials, the shear bond strength at the interface between the surface of the resin material and resin cement was measured. The mean shear bond strength values of GP, NXT, MZ, and VIPI were 23.29 ± 3.88, 26.14 ± 4.67, 25.41 ± 4.03, and 18.79 ± 4.26 MPa, respectively. There was no significant difference among the SBSs of GP, NXT and MZ except for VIPI. The result of this study indicates that the 3D printing resin meets the essential requirement for clinical use by showing clinically adequate bond strength.

The purpose of this study was to measure bone age using an artificial intelligence program based on the Greulich-Pyle (GP) method to find out the bone age corresponding to each stage of cervical vertebral maturation (CVM) and the middle phalanx of the third finger (MP3). This study was conducted on 3,118 patients who visited pediatric dentistry at Kyung Hee University Dental Hospital and Pusan National University Dental Hospital from 2013 to 2021. The CVM stage was divided into 5 stages according to the classification by Baccetti, and the MP3 stage was divided into 5 stages according to the methods of Hägg and Taranger. Based on the GP method, bone age was evaluated using an artificial intelligence program. The pubertal growth spurt in the CVM stage was CVM II and III. The mean bone age in CVM II was 11.00 ± 1.81 years for males and 10.00 ± 1.49 years for females, and in CVM III, 13.00 ± 1.46 years for males and 12.00 ± 1.44 years for females (p < 0.0001). The pubertal growth spurt in the MP3 stage was MP3 - G stage. The bone age at the MP3 - G stage was 13.14 ± 1.07 years for males and 11.40 ± 1.09 years for females (p < 0.0001). Bone age evaluation using artificial intelligence is worth using in clinical practice, and it is expected that a faster and more accurate diagnosis will be possible.

The aim of this retrospective study was to evaluate the demographic characteristics of pediatric dental patients who underwent dental treatment under general anesthesia (DTGA) at the Seoul National University Dental Hospital from January 2011 through December 2020 and compare the patterns of repeated DTGA between dental patients with severe disabilities (DSD) and non-DSD (healthy or medically compromised patients without DSD). There were 1,857 DTGAs among 1,719 patients (mean age = 5.1 years; males = 59.3%; ASA 2 or above = 52.9%; DSD = 26.8%). Overall, 6.6% of patients underwent repeated DTGA, and the rate of repeated DTGA over a 10-year period was 7.4%. ASA 2 or above (p < 0.0001) and DSD (p < 0.0001) were more likely to undergo repeated DRGA compared to ASA 1 and non-DSD. At both GA1 and GA2, DSD received significantly more restorative treatment on permanent teeth than non-DSD (p = 0.002, p < 0.0001, respectively). There has been an increasing demand for DTGA in pediatric dentistry over the last 10 years. Regular check-ups and preventive oral health care are necessary for pediatric dental patients with severe disabilities to reduce the possibility of repeated DTGA.

This study compared the surface roughness and microbial adhesion characteristics of Omnichroma, a novel composite resin developed using “smart chromatic technology”, with those of two other conventional composite resins with different filler compositions. A total of 144 specimens were fabricated using 3 types of composite resins: Omnichroma (nano-spherical), Filtek Z350XT (nanofill), and Tetric N-Ceram (nanohybrid) and, divided into 3 groups of 48. Finishing was performed using tungsten carbide burs. Specimens were then divided into 3 subgroups using different polishing methods: Control, SofLex, and PoGo. Surface roughness was analyzed quantitatively and qualitatively using an atomic force microscope and a scanning electron microscope. Microbial adhesion was assessed by culturing Streptococcus mutans on the specimens for 24 hours and then measuring colony-forming units attached to the upper surface. The surface roughness (Ra) of Omnichroma was 0.123 μm after finishing, and it exhibited a smooth surface compared to the other resins. However, after polishing, there were no significant differences in the surface roughness between the three composite groups, regardless of the polishing methods. The surfaces of the Control subgroups were significantly rougher than those of the SofLex subgroups in all 3 composite groups. However, except for Tetric N-Ceram, there were no significant differences between the Control and PoGo subgroups in the other composite groups. Microbial adhesion assessment showed no significant differences between any of the 3 composite resin subgroups; however, Omnichroma exhibited higher microbial adhesion than the other two composites. No significant correlation was observed between surface roughness and microbial adhesion.

In this study, the recognition of child abuse and neglect (CAN) and reporting attitudes of general dentists and pediatric dentists in Korea were estimated. A survey was conducted among dentists working at clinics or university hospitals, including interns and residents at dental hospital training institutions. The questionnaire, consisting of 32 questions and detailed questions, subdivided into ‘general characteristics of respondents’, ‘CAN’, ‘CAN report’, ‘laws to CAN’, ‘countermeasures against CAN’. The survey was conducted using a messenger, and 176 respondents’ answers were analyzed. The recognition of CAN showed high scores in the order of physical abuse, neglect, and emotional abuse. The positive attitude toward reporting CAN had a higher score than the negative attitude. Of the total respondents, 19 said they reported child abuse, and 18 said they were suspected of child abuse but hesitated to report it. Among the laws related to CAN, the protection measures for CAN reporters and the protocol for CAN showed low awareness. Since then, they have wanted to know how to find abused children and how to deal with them in education. This study is expected to be used as data to improve dentists’ awareness and consciousness of CAN in the future.

Congenitally missing teeth are one of the most prevalent dental anomalies in the oral cavity. In this study, the prevalence, distribution, and symmetry of congenitally missing permanent teeth among 1,865 patients aged 7 to 15 years who visited the Pediatric Dentistry Department of Wonju Severance Christian Hospital from March 2011 to May 2021 and took panoramic radiographs were investigated and analyzed. Most of the patients had one or two congenitally missing teeth, mainly in the second premolars and lateral incisors. Congenitally missing teeth occurred more in the mandible than in the maxilla, and there was no significant difference in prevalence between the left and right sides. Congenitally missing teeth tend to occur symmetrically on the left and right sides and in the maxilla and mandible, depending on the tooth. Early oral examination and radiological examination are required to prevent complications due to congenitally missing teeth, and appropriate interdisciplinary treatment is required.

The aim of this study was to retrospectively analyze the effects of pulp treatment on exfoliation of primary teeth and its related factors. In this study, 167 teeth of 97 patients aged 6 months to 12 years who were treated with pulp treatment at Dankook Dental Hospital were selected, and information related to pulp treatment and tooth loss was collected. The included subjects were 72 primary anterior teeth (43.1%) and 95 primary posterior teeth (56.9%), of which 56 were males (57.7%) and 41 females (42.3%). The mean follow-up period was 106.1 ± 38.7 months, and the mean age at pulp treatment was 34.8 ± 15.4 months for primary anterior teeth and 69.1 ± 25.1 months for primary posterior teeth. Unilaterally pulpectomized teeth were significantly exfoliated earlier than the same tooth on the opposite side (p < 0.05). Also, in the case of teeth with periapical lesions, despite pulp treatment, the probability of extraction due to infection has been increased on primary anterior teeth (p < 0.05), but not on posterior teeth (p > 0.05). Pulpectomized teeth were lost earlier, an average of 7.8 months for primary anterior teeth and 8.5 months for primary posterior teeth. Early loss of the primary tooth can lead to space loss and premature eruption of the successor, so this can be considered when planning or performing treatment of the primary tooth.

The purpose of this study was to compare the values of tongue pressure (TP), lip closing pressure (LCP), right buccal pressure (RBP), and left buccal pressure (LBP) and check the intraoral muscle imbalance and observe the changed values according to the myofunctional therapy (MFT) period. The MFT with a prefabricated appliance was performed on patients with certain muscular dysfunctions due to oral habits. And the improvement of perioral muscles was evaluated using a balloon-based pressure measurement. The group consisted of 21 patients with oral habits such as chronic mouth breathing, finger sucking, lip sucking, tongue thrusting, and atypical swallowing habits. When comparing the two groups before treatment, there was a significant difference in TP and LCP values. The TP increased the most in the first month since the start of myofunctional therapy, and the LCP increased the most between 3 and 6 months after treatment began. The values of TP, LCP, RBP, and LBP in the control group measured before treatment were very similar to the results of the experimental group 6 months after the myofunctional therapy. When the MFT was steadily performed, it was possible to observe a noticeable increase in the tongue and lip closing pressure. At least 6 months of myofunctional therapy is recommended for patients with intraoral muscle imbalance due to oral habits.