OBJECTIVES: To synthesize a temperature-responsive multimodal motion microrobot (MMMR) using temperature and magnetic field-assisted microfluidic droplet technology to achieve targeted drug delivery and controlled drug release. METHODS: Microfluidic droplet technology was utilized to synthesize the MMMR by mixing gelatin with magnetic microparticles. The microrobot possessed a magnetic anisotropy structure to allow its navigation and targeted drug release by controlling the temperature field and magnetic field. In the experiment, the MMMR was controlled to move in a wide range along a preset path by rotating a uniform magnetic field, and the local circular motion was driven by a planar rotating gradient magnetic field of different frequencies. The MMMR was loaded with simulated drugs, which were released in response to laser heating. RESULTS: Driven by a rotating magnetic field, the MMMR achieved linear motion following a predefined path. The planar gradient rotating magnetic field controlled circular motion of the MMMR with an adjustable radius, utilizing the centrifugal force generated by rotation. The drug-loaded MMMR successfully reached the target location under magnetic guidance, where the gelatin matrix was melted using laser heating for accurate drug release, after which the remaining magnetic particles were removed using magnetic field. CONCLUSIONS The MMMR possesses multimodal motion capabilities to enable precise navigation along a predefined path and dynamic regulation of drug release within the target area, thus having great potential for a wide range of biomedical applications.
Drug Delivery Systems/methods* ; Temperature ; Drug Liberation ; Magnetic Fields ; Robotics ; Gelatin/chemistry* ; Delayed-Action Preparations ; Microfluidics ; Motion

Xerostomia (dry mouth) is frequently experienced by patients treated with radiotherapy for head and neck cancers or with Sjögren's syndrome, with no permanent cure existing for this debilitating condition. To this end, in vitro platforms are needed to test therapies directed at salivary (fluid-secreting) cells. However, since these are highly differentiated secretory cells, the maintenance of their differentiated state while expanding in numbers is challenging. In this study, the efficiency of three reversible thermo-ionically crosslinked gels: (1) alginate-gelatin (AG), (2) collagen-containing AG (AGC), and (3) hyaluronic acid-containing AG (AGHA), to recapitulate a native-like environment for human salivary gland (SG) cell expansion and 3D spheroid formation was compared. Although all gels were of mechanical properties comparable to human SG tissue (~11 kPa) and promoted the formation of 3D spheroids, AGHA gels produced larger (>100 cells/spheroid), viable (>93%), proliferative, and well-organized 3D SG spheroids while spatially and temporally maintaining the high expression of key SG proteins (aquaporin-5, NKCC1, ZO-1, α-amylase) for 14 days in culture. Moreover, the spheroids responded to agonist-induced stimulation by increasing α-amylase secretory granules. Here, we propose alternative low-cost, reproducible, and reversible AG-based 3D hydrogels that allow the facile and rapid retrieval of intact, highly viable 3D-SG spheroids.
Humans ; Hydrogels/chemistry* ; Acinar Cells/cytology* ; Spheroids, Cellular/cytology* ; Salivary Glands/cytology* ; Gelatin/chemistry* ; Collagen/chemistry* ; Alginates/chemistry* ; Cell Culture Techniques/methods* ; Hyaluronic Acid/chemistry* ; Cell Proliferation ; Cell Survival ; Cells, Cultured

Dental pulp-dentin complex defects remain a major unresolved problem in oral medicines. Clinical therapeutic methods including root canal therapy and vital pulp therapy are both considered as conservative strategies, which are incapable of repairing the pulp-dentin complex defects. Although biomaterial-based strategies show remarkable progress in antibacterial, anti-inflammatory, and pulp regeneration, the important modulatory effects of nerves within pulp cavity have been greatly overlooked, making it challenging to achieve functional pulp-dentin complex regeneration. In this study, we propose an injectable bioceramics-containing composite hydrogel in combination of Li-Ca-Si (LCS) bioceramics and gelatin methacrylate matrix with photo-crosslinking properties. Due to the sustained release of bioactive Li, Ca and Si ions from LCS, the composite hydrogels possess multiple functions of promoting the neurogenic differentiation of Schwann cells, odontogenic differentiation of dental pulp stem cells, and neurogenesis-odontogenesis couples in vitro. In addition, the in vivo results showed that LCS-containing composite hydrogel can significantly promote the pulp-dentin complex repair. More importantly, LCS bioceramics-containing composite hydrogel can induce the growth of nerve fibers, leading to the re-innervation of pulp tissues. Taken together, the study suggests that LCS bioceramics can induce the innervation of pulp-dentin complex repair, offering a referable strategy of designing multifunctional filling materials for functional periodontal tissue regeneration.
Dental Pulp/drug effects* ; Hydrogels/pharmacology* ; Animals ; Ceramics/pharmacology* ; Dentin/drug effects* ; Biocompatible Materials/pharmacology* ; Rats ; Gelatin ; Regeneration/drug effects* ; Cell Differentiation/drug effects* ; Injections ; Humans ; Odontogenesis/drug effects*

OBJECTIVE: The application progress of medical absorbable haemostatic material (MAHM) in hemostasis during orthoapedic surgery was reviewed, in order to provide reference for clinical hemostasis program. METHODS: The domestic and foreign literature on the application of MAHM for hemostasis in orthopedic surgery was extensively reviewed and summarized. RESULTS: According to biocompatibility, MAHM can be divided into oxidized cellulose/oxidized regenerated cellulose materials, chitosan and its derivatives materials, starch materials, collagen and gelatin materials, and fibrin glue materials, etc., which can effectively reduce blood loss when used in orthopedic surgery for hemostasis. Each hemostatic material has different coagulation mechanism and suitable population. Oxidized cellulose/oxidized regenerated cellulose, chitosan and its derivatives, starch hemostatic material mainly stops bleeding by stimulating blood vessel contraction and gathering blood cells, which is suitable for people with abnormal coagulation function. Collagen, gelatin and fibrin glue hemostatic materials mainly affect the physiological coagulation mechanism of the human body to stop bleeding, suitable for people with normal coagulation function. CONCLUSION Reasonable selection of MAHM can effectively reduce perioperative blood loss and reduce the risk of postoperative complications, but at present, single hemostatic material can not meet clinical needs, and a new composite hemostatic material with higher hemostatic efficiency needs to be developed.
Humans ; Hemostatics ; Orthopedic Procedures/methods* ; Hemostasis, Surgical/methods* ; Biocompatible Materials ; Cellulose, Oxidized ; Chitosan ; Fibrin Tissue Adhesive ; Gelatin ; Blood Loss, Surgical/prevention & control* ; Hemostasis/drug effects*

Hydrogels/therapeutic use* ; Tissue Engineering ; Gelatin ; Intervertebral Disc/surgery* ; Methacrylates ; Tissue Scaffolds

Gelatin microspheres were discussed as a scaffold material for bone tissue engineering, with the advantages of its porosity, biodegradability, biocompatibility, and biosafety highlighted. This review discusses how bone regeneration is aided by the three fundamental components of bone tissue engineering-seed cells, bioactive substances, and scaffold materials-and how gelatin microspheres can be employed for in vitro seed cell cultivation to ensure efficient expansion. This review also points out that gelatin microspheres are advantageous as drug delivery systems because of their multifunctional nature, which slows drug release and improves overall effectiveness. Although gelatin microspheres are useful for bone tissue creation, the scaffolds that take into account their porous structure and mechanical characteristics might be difficult to be created. This review then discusses typical techniques for creating gelatin microspheres, their recent application in bone tissue engineering, as well as possible future research directions.
Tissue Engineering/methods* ; Tissue Scaffolds/chemistry* ; Gelatin/chemistry* ; Microspheres ; Bone and Bones ; Porosity

BACKGROUND: It is still unclear what the minimal infusion volume is to effectively predict fluid responsiveness. This study was designed to explore the minimal infusion volume to effectively predict fluid responsiveness in septic shock patients. Hemodynamic effects of fluid administration on arterial load were observed and added values of effective arterial elastance (Ea) in fluid resuscitation were assessed. METHODS: Intensive care unit septic shock patients with indwelling pulmonary artery catheter (PAC) received five sequential intravenous boluses of 100 mL 4% gelatin. Cardiac output (CO) was measured with PAC before and after each bolus. Fluid responsiveness was defined as an increase in CO >10% after 500 mL fluid infusion. RESULTS: Forty-seven patients were included and 35 (74.5%) patients were fluid responders. CO increasing >5.2% after a 200 mL fluid challenge (FC) provided an improved detection of fluid responsiveness, with a specificity of 80.0% and a sensitivity of 91.7%. The area under the ROC curve (AUC) was 0.93 (95% CI: 0.84-1.00, P  < 0.001). Fluid administration induced a decrease in Ea from 2.23 (1.46-2.78) mmHg/mL to 1.83 (1.34-2.44) mmHg/mL (P = 0.002), especially for fluid responders in whom arterial pressure did not increase. Notably, the baseline Ea was able to detect the fluid responsiveness with an AUC of 0.74 (95% CI: 0.59-0.86, P < 0.001), whereas Ea failed to predict the pressure response to FC with an AUC of 0.50 (95% CI: 0.33-0.67, P = 0.086). CONCLUSION: In septic shock patients, a minimal volume of 200 mL 4% gelatin could reliably detect fluid responders. Fluid administration reduced Ea even when CO increased. The loss of arterial load might be the reason for patients who increased their CO without pressure responsiveness. Moreover, a high level of Ea before FC was able to predict fluid responsiveness rather than to detect the pressure responsiveness. TRIAL REGISTRATION ClinicalTrials.gov, NCT04515511.
Cardiac Output/physiology* ; Fluid Therapy ; Gelatin/therapeutic use* ; Hemodynamics ; Humans ; Shock, Septic/therapy*

Objective: To explore the effects and mechanism of water-soluble chitosan hydrogel on infected full-thickness skin defect wounds in diabetic mice. Methods: The experimental research method was adopted. The control hydrogel composed of polyvinyl alcohol and gelatin, and the water-soluble chitosan hydrogel composed of the aforementioned two materials and water-soluble chitosan were prepared by the cyclic freeze-thaw method. The fluidity of the two dressings in test tube before and after the first freeze-thawing was generally observed, and the difference in appearance of the final state of two dressings in 12-well plates were compared. According to random number table (the same grouping method below), the cell strains of L929 and HaCaT were both divided into water-soluble chitosan hydrogel group and control hydrogel group, respectively. After adding corresponding dressings and culturing for 24 h, the cell proliferation activity was measured using cell counting kit 8. Rabbit blood erythrocyte suspensions were divided into normal saline group, polyethylene glycol octyl phenyl ether (Triton X-100) group, water-soluble chitosan hydrogel group, and control hydrogel group, which were treated accordingly and incubated for 1 hour, and then the hemolysis degree of erythrocyte was detected by a microplate reader. Twenty-four female db/db mice aged 11-14 weeks were selected, and full-thickness skin defect wounds on their backs were inflicted and inoculated with the methicillin-resistant Staphylococcus aureus (MRSA), 72 h later, the mice were divided into blank control group, sulfadiazine silver hydrogel group, control hydrogel group, and water-soluble chitosan hydrogel group, which were treated accordingly. On post injury day (PID) 0 (immediately), 7, 14, and 21, the healing of the wound was observed. On PID 14 and 21, the wound healing rate was calculated. On PID 14, MRSA concentration in wounds was determined. On PID 21, the wounds were histologically analyzed by hematoxylin and eosin staining; the expression of CD31 in the wounds was detected by immunofluorescence method, and its positive percentage was calculated. Raw264.7 cells were taken and divided into interleukin-4 (IL-4) group, blank control group, control hydrogel group, and water-soluble chitosan hydrogel group, which were treated accordingly. At 48 h of culture, the percentages of CD206 positive cells were detected by flow cytometry. The number of samples was all 3. Data were statistically analyzed with independent sample t test, one-way analysis of variance, analysis of variance for repeated measurement, least significant difference test, and Dunnett T3 test. Results: Two dressings in test tube had certain fluidity before freeze-thawing and formed semi-solid gels after freeze-thawing for once. The final forms of two dressings in 12-well plates were basically stable and translucent sheets, with little difference in transparency. At 24 h of culture, the cell proliferation activities of L929 and HaCaT in water-soluble chitosan hydrogel group were significantly higher than those in control hydrogel group (with t values of 6.37 and 7.50, respectively, P<0.01). At 1 h of incubation, the hemolysis degree of erythrocyte in water-soluble chitosan hydrogel group was significantly lower than that in Triton X-100 group (P<0.01), but similar to that in normal saline group and control hydrogel group (P>0.05). On PID 0, the traumatic conditions of mice in the 4 groups were similar. On PID 7, more yellowish exudates were observed inside the wound in blank control group and control hydrogel group, while a small amount of exudates were observed in the wound in sulfadiazine silver hydrogel group and water-soluble chitosan hydrogel group. On PID 14, the wounds in blank control group and control hydrogel group were dry and crusted without obvious epithelial coverage; in sulfadiazine silver hydrogel group, the scabs fell off and purulent exudate was visible on the wound; in water-soluble chitosan hydrogel group, the base of wound was light red and obvious epithelial coverage could be observed on the wound. On PID 14, the wound healing rate in water-soluble chitosan hydrogel group was significantly higher than that in the other 3 groups (all P<0.01). On PID 21, the wound in water-soluble chitosan hydrogel group was completely closed, while the wounds in the other 3 groups were not completely healed; the wound healing rate in water-soluble chitosan hydrogel group was significantly higher than that in the other 3 groups (all P<0.01). On PID 14, the concentration of MRSA in the wound in water-soluble chitosan hydrogel group was significantly lower than that in blank control group (P<0.01), but similar to that in control hydrogel group and sulfadiazine silver hydrogel group (P>0.05). On PID 21, the new epidermis was severely damaged in blank control group; the epidermis on the wound in control hydrogel group also had a large area of defect; complete new epidermis had not yet being formed on the wound in sulfadiazine silver hydrogel group; the wound in water-soluble chitosan hydrogel group was not only completely covered by the new epidermis, the basal cells of the new epidermis were also regularly aligned. On PID 21, the percentage of CD31 positivity in the wound in water-soluble chitosan hydrogel group was (2.19±0.35)%, which was significantly higher than (0.18±0.05)% in blank control group, (0.23±0.06)% in control hydrogel group, and (0.62±0.25)% in sulfadiazine silver hydrogel group, all P<0.01. At 48 h of culture, the percentage of CD206 positive Raw264.7 cells in water-soluble chitosan hydrogel group was lower than that in IL-4 group (P>0.01) but significantly higher than that in blank control group and control hydrogel group (P<0.05 or P<0.01). Conclusions: The water-soluble chitosan hydrogel has good biosafety and can induce higher level of macrophage M2 polarization than control hydrogel without water-soluble chitosan, so it can enhance the repair effect of MRSA-infected full-thickness skin defect wounds in diabetic mice and promote rapid wound healing.
Mice ; Female ; Animals ; Rabbits ; Interleukin-4 ; Hydrogels/pharmacology* ; Wound Healing ; Chitosan/pharmacology* ; Diabetes Mellitus, Experimental ; Water ; Methicillin-Resistant Staphylococcus aureus ; Gelatin ; Polyvinyl Alcohol ; Hemolysis ; Saline Solution ; Eosine Yellowish-(YS) ; Hematoxylin ; Octoxynol ; Silver ; Phenyl Ethers ; Sulfadiazine

Wound repair is a common clinical problem, which seriously affects the quality of life of patients and also brings a heavy burden to the society. Hydrogel-based multifunctional dressing has shown strong potential in the treatment of acute and chronic wounds. In addition to its good histocompatibility, cell adhesion, and biodegradability, methacrylic anhydride gelatin (GelMA) hydrogel has also attracted much attention due to its low cost, mild reaction conditions, adjustable physicochemical properties, and wide clinical applications. In this paper, the characteristics of GelMA hydrogel and its research progress in wound repair are introduced, and the future development of multifunctional GelMA hydrogel dressing for wound treatment is prospected.
Humans ; Gelatin/chemistry* ; Hydrogels ; Anhydrides ; Quality of Life ; Methacrylates/chemistry*

Objective: To investigate the effects of methacrylic anhydride gelatin (GelMA) hydrogel loaded with silver and recombinant human basic fibroblast growth factor (rh-bFGF) on deep partial-thickness burn wounds in rabbits. Methods: The experimental research method was adopted. Low-concentration GelMA materials, medium-concentration GelMA materials and high-concentration GelMA materials containing different concentrations of methacrylic anhydride (MA) were prepared, after adding photoinitiator, low-concentration GelMA hydrogels, medium-concentration GelMA hydrogels, and high-concentration GelMA hydrogels were obtained, respectively. The nuclear magnetic resonance spectroscopy was performed to detect the hydrogen nuclear magnetic resonance spectra of the above-mentioned three concentrations of GelMA materials, and to calculate the degree of substitution according to the spectrum diagram. The three-dimensional microstructure and pore size of 3 types of above-mentioned GelMA hydrogels were detected by field emission scanning electron microscopy (FESEM), with 9 samples measured. According to the selected concentration of MA, ten kinds of solutions of GelMA with different concentration of silver (silver-containing GelMA) were synthesized, and the silver-containing GelMA solution of each concentration was divided into three parts, and then exposed to ultraviolet light lasting for 20, 25, and 35 s, respectively. After adding photoinitiator,the corresponding silver-containing GelMA hydrogels were obtained. The residual degradation rate of silver-containing GelMA hydrogel with different photocrosslinking times was detected by collagenase degradation method at degradation of 12, 24, 36, and 48 h; and the time required for complete degradation was detected, and the sample number was 5. The inhibition zone diameter of GelMA hydrogel under above screened photocrosslinking times containing 10 concentrations of silver against Staphylococcus aureus was measured to reflect its antibacterial ability, and the sample numbers were all 5. The silver-containing GelMA hydrogel with statistical significance compared with the antibacterial circle diameter of the silver-containing GelMA hydrogel containing the lowest concentration (no silver) was considered as having antibacterial activity. The three-dimensional microstructure and pore size of the silver-containing GelMA hydrogels with antibacterial activity and the lowest drug concentration selected were detected by FESEM, and the sample numbers were all 9. The freeze-dried alone GelMA hydrogel and the freeze-dried silver-containing GelMA hydrogel were soaked in phosphate buffer solution for 24 h, respectively, then the swelling rate of the two GelMA hydrogel were calculated and compared by weighing method, and the sample number was 5. GelMA hydrogel containing silver and rh-bFGF, namely compound hydrogel for short, was prepared according to the preliminary experiment and the above experimental results. The appearance of the composite hydrogel was observed in general, and its three-dimensional microstructure and pore size were detected by FESEM. The deep partial-thickness burn wound was made on the back of 30 rabbits (aged 4-6 months, female half and half). Meanwhile, with the rabbit head as the benchmark, the wounds on the left side of the spine were treated as composite hydrogel treatment group, and the wounds on the right side were treated as gauze control group, and which were treated accordingly. On post injury day (PID) 3, 7, 14, 21, and 28, the healing of wounds in the two groups was observed. On PID 7, 14, 21, and 28, the wound healing area was recorded and the healing rate was calculated, with a sample number of 30. Data were statistically analyzed with analysis of variance for repeated measurement, one-way analysis of variance, and independent sample t test. Results: The substitution degree among low-concentration GelMA materials, medium-concentration GelMA materials, and high-concentration GelMA materials was significantly different (F=1 628.00, P<0.01). The low-concentration GelMA hydrogel had a loose and irregular three-dimensional spatial network structure with a pore size of (60±17) μm; the medium-concentration GelMA hydrogel had a relatively uniform three-dimensional spatial network and pore size with a pore size of (45±13) μm; the high-concentration GelMA hydrogel had the dense and disordered three-dimensional spatial network with a pore size of (25±15) μm, the pore sizes of 3 types of GelMA hydrogels were significantly differences (F=12.20, P<0.01), and medium concentration of MA was selected for the concentration of subsequent materials. The degradability of silver-containing GelMA hydrogels with different concentrations of the same photocrosslinking time was basically same. The degradation residual rates of silver-containing GelMA hydrogels with 20, 25, and 35 s crosslinking time at 12 h were (74.2±1.7)%, (85.3±0.9)%, and (93.2±1.2)%, respectively; the residual rates of degradation at 24 h were (58.3±2.1)%, (65.2±1.8)%, and (81.4±2.6)%, respectively; the residual rates of degradation at 36 h were (22.4±1.9)%, (45.2±1.7)%, and (68.1±1.4)%, respectively; the residual rates of degradation at 48 h were (8.2±1.7)%, (32.4±1.3)%, and (54.3±2.2)%, respectively, and 20, 25, and 30 s photocrosslinking time required for complete degradation of silver-containing GelMA hydrogels were (50.2±2.4), (62.4±1.4), and (72.2±3.2) h, and the difference was statistically significant (F=182.40, P<0.01), 25 s were selected as the subsequent photocrosslinking time. The antibacterial diameters of 10 types of silver-containing GelMA hydrogels against Staphylococcus aureus from low to high concentrations were (2.6±0.4), (2.5±0.4), (3.2±0.4), (12.1±0.7), (14.8±0.7), (15.1±0.5), (16.2±0.6), (16.7±0.5), (16.7±0.4), and (16.7±0.6) mm, respectively, and which basically showed a concentration-dependent increasing trend, and the overall difference was statistically significant (F=428.70, P<0.01). Compared with the silver-containing GelMA hydrogel with the lowest concentration, the antibacterial circle diameters of other silver-containing GelMA hydrogels with antibacterial ability from low to high concentration were significantly increased (with t values of 26.35, 33.84, 43.65, 42.17, 49.24, 55.74, and 43.72, respectively, P<0.01). The silver-containing GelMA hydrogel with the antibacterial diameter of (12.1±0.7) mm had the lowest antibacterial activity against Staphylococcus aureus and the lowest drug loading concentration, and the concentration of silver was selected for the concentration of subsequent materials. The microscopic morphology of the silver-containing GelMA hydrogel containing silver element with a pore size of (45±13) μm had a regular and linear strip-like structure. After soaking for 24 h, the swelling ratio of silver-containing GelMA hydrogel was similar to that of alone GelMA hydrogel. The composite hydrogel was colorless, clear and transparent, and its three-dimensional microstructure was a regular and uniform grid, with a filament network structure inside, and the pore size of (40±21) μm. On PID 3, a large amount of necrotic tissue and exudate of rabbit wound in composite hydrogel group were observed, and scattered scabs, a small amount of necrotic tissue and exudate of rabbit wound in gauze control group were observed. On PID 7, the area of rabbit wound in composite hydrogel group was significantly reduced, and adhesion of rabbit wound and gauze in gauze control group was observed. On PID 14, In composite hydrogel group, the rabbit wound surface was ruddy, and the growth of granulation tissue was observed, and in gauze control group, the rabbit wound base was pale, and the blood supply was poor. On PID 21, the rabbit wounds in composite hydrogel group healed completely, and rabbit wound in gauze control group had healing trend. On PID 28, new hair could be seen on rabbit wound surface in composite hydrogel group; oval wound of rabbit in gauze control group still remained. On PID 7, 14, 21, and 28, the wound healing areas of rabbit in composite hydrogel group were significantly larger than those in gauze control group (with t values of 2.24, 4.43, 7.67, and 7.69, respectively, P<0.05 or P<0.01). Conclusions: The medium-concentration GelMA hydrogel has good physical and chemical properties in terms of swelling and degradability. The screened silver-containing GelMA hydrogels had the lowest antibacterial activity and the lowest drug loading concentration. Composite hydrogel can significantly shorten the healing time of deep partial-thickness burn wounds in rabbits.
Anhydrides ; Animals ; Anti-Bacterial Agents ; Burns/drug therapy* ; Female ; Fibroblast Growth Factor 2 ; Gelatin/pharmacology* ; Humans ; Hydrogels/pharmacology* ; Rabbits ; Recombinant Proteins ; Staphylococcal Infections ; Staphylococcus aureus