At present, the C-arm structure accelerators commonly used in radiotherapy equipment are complex in operation and have potential safety hazards when realizing non-coplanar treatment. By combining with medical robotic arm technology, a spherical radiotherapy accelerator motion system is designed. The beam module is clamped by the medical robotic arm structure to achieve three-dimensional multi-angle irradiation treatment within the non-coplanar angle range. Firstly, the rotating mechanism, beam module, and MLC module of the spherical radiotherapy equipment are designed. Then, the double-plane counterweight method is used to calculate the dynamic balance of the equipment, ensuring that the beam center point does not rotate during the treatment process. Finally, the strength check and reliability analysis of the transmission component gear are conducted. The results show that the designed spherical radiotherapy accelerator motion system can meet the requirements of stable, accurate, and fast precision radiotherapy, which is conducive to improving the treatment efficiency.
Particle Accelerators/instrumentation* ; Equipment Design ; Reproducibility of Results ; Radiotherapy/instrumentation*

Hemodynamic monitoring can reflect cardiac function and blood perfusion and is an indispensable monitoring method in clinical practice. Invasive hemodynamic monitoring methods represented by the thermodilution method are limited in their clinical application scope because they require vascular cannulation. Non-invasive hemodynamic monitoring has attracted extensive attention from medical companies and clinicians at home and abroad in recent years due to its advantages such as safety, non-invasiveness, continuous monitoring, simple operation, and low cost. This paper designs a non-invasive hemodynamic monitoring system based on the impedance cardiography, including hardware, algorithm, software design, and performance parameter evaluation. Among them, the hardware part mainly includes a differential high-frequency constant current source stimulation circuit, impedance cardiogram signal acquisition, and ECG signal acquisition circuit. Signal processing includes wave filtering, impedance cardiogram signal calibration, and ECG signal and impedance cardiogram signal feature point recognition. According to the collected impedance cardiogram and ECG signals, hemodynamic parameters such as heart rate (HR), stroke volume (SV), cardiac output (CO), stroke index (SI), cardiac index (CI), and cardiac contractility index (ICON) are calculated based on the Nyboer thoracic cylinder model. After testing, the key technical indicators of the system hardware are better than that of the relevant medical device standards. The system was used to collect impedance cardiogram and ECG signal data from 40 volunteers. The calculated HR, SV, and CO, three important hemodynamic indicators, were compared with the ICONCore non-invasive cardiac output monitor of OSYPKA Medical in Germany. Their Pearson correlation coefficients were 0.992 ( P<0.001), 0.948 ( P<0.001), and 0.933 ( P<0.001), respectively, verifying that the designed system has high accuracy and reliability.
Cardiography, Impedance/methods* ; Humans ; Hemodynamic Monitoring/methods* ; Equipment Design ; Signal Processing, Computer-Assisted ; Hemodynamics ; Algorithms ; Monitoring, Physiologic/methods* ; Electrocardiography

At present, there is no effective drug treatment for obstructive sleep apnea hypopnea syndrome (OSAHS). It is usually treated by mechanical ventilation through a ventilator. In this paper, a non-invasive bi-level breathing therapy system suitable for home scenarios is developed. The system supports single-level and bi-level positive airway pressure therapies, and introduces the function of inspiratory synchronous trigger based on flow monitoring to enhance the synchrony of patient-ventilator synchronization. The test results show that the performance indicators of the system meet expectations. Each ventilation mode can operate normally and can meet the requirements for the use of home non-invasive ventilators.
Humans ; Sleep Apnea, Obstructive/therapy* ; Equipment Design ; Noninvasive Ventilation/instrumentation* ; Respiration, Artificial

Compared with total knee arthroplasty, unicondylar knee replacement has the advantage of preserving the knee tissue structure and motor function to the greatest extent. Pre-clinical in-vitro test is an important tool to evaluate the safety and effectiveness of unicondylar knee prostheses, and it is also a key focus of the product registration process. Through collection, comparison, and analysis of current regulations, technical standards, guidelines, and related research literature, this paper expounds on the relevant research methods for the pre-clinical in-vitrotesting of unicondylar knee prostheses. At the same time, in conjunction with current evaluation requirements and experience, the study discusses the focus of pre-clinical performance research for unicondylar knee prostheses during the registration process to clarify the performance evaluation requirements of this product category. This aims to provide a reference for the pre-clinical performance research of unicondylar knee prostheses and to standardize industry testing standards.
Knee Prosthesis ; Arthroplasty, Replacement, Knee ; Humans ; Prosthesis Design ; Materials Testing

OBJECTIVE: To accurately measure human energy metabolism with high temporal resolution, a respiratory gas analysis system was designed using a breath-by-breath approach. METHODS: Firstly, indirect calorimetry was employed in respiratory gas analysis to measure the respiratory flow and concentration signals in real-time. Secondly, oxygen consumption QO2 and carbon dioxide production QCO2 were calculated through respiratory characteristic alignment and respiratory signal segmentation. Finally, metabolic indexes were calculated according to the Weir formula. Furthermore, a controlled trial was formulated for validation comparisons with the MGC ULTIMA SYSTEM PFX CARDIO2. RESULTS: The results indicate that the data points of metabolic indexes measured by this system all fall within the confidence interval when compared with those of the MGC. CONCLUSION The system has high consistency with the MGC measurement results. Thus, the system can accurately measure metabolism in real-time and provide data support for clinical nutrition assessment and therapy.
Humans ; Energy Metabolism ; Breath Tests/instrumentation* ; Calorimetry, Indirect/instrumentation* ; Equipment Design

End-tidal carbon dioxide monitoring is an important means of evaluating human lung function and is widely used in fields such as clinical emergency treatment and cardiopulmonary resuscitation. This paper develops a microstream end-tidal carbon dioxide monitoring system. It adopts an integrated gas circuit design to further reduce the size of the equipment. The system uses the method of calculating the root mean square (RMS) of differential pressure signals to regulate the gas circuit flow, enabling the system to stably operate at a flow state of 30 mL/min. In addition, by simultaneously detecting multiple environmental parameters such as temperature and pressure, the system realizes system state monitoring and gas parameter compensation. The test results show that various indicators of the system meet the requirements of relevant standards, laying a good foundation for subsequent engineering applications.
Carbon Dioxide/analysis* ; Equipment Design ; Monitoring, Physiologic/methods* ; Humans

Point-of-care testing (POCT), as an emerging diagnostic technology, is gradually becoming an important part of the clinical diagnostic field due to its advantages, such as ease of operation, rapid response, and portability. This paper primarily introduces two mainstream technologies in POCT: lateral flow assays and nucleic acid amplification. It covers the basic principles, applications, and quality control points in design and development of the two mainstream technologies, aiming to provide a technical reference for device manufacturers, researchers, and regulatory agencies.
Point-of-Care Testing ; Point-of-Care Systems ; Quality Control ; Equipment Design ; Nucleic Acid Amplification Techniques ; Humans

After the production of the gradient coil of the magnetic resonance imaging system, electromagnetic field testing is required to verify whether the assembly accuracy meets the electromagnetic field requirements. Since the passive magnetic field B _z satisfies the Laplace ^,s equation and is a harmonic function, and according to the extreme value principle of harmonic function, the maximum or minimum values of B _z can only appear on the boundaries, so the observation points of the magnetic field are generally selected on the surface of the spherical imaging area. For superconducting magnets used for human body magnetic resonance imaging, a spherical area with a center diameter of 40~50 cm is generally selected as the shimming target area. Only the field value of the target area needs to be measured, and the spherical harmonic coefficients obtained after data processing are used to determine the magnetic field performance of the gradient coil. There are many testing principles and methods for electromagnetic fields, so there is no unified way and method in the field of commercial applications. This article is based on the Gauss-Legendre numerical integration, measures and analyzes the magnetic field performance of gradient coils by building a data acquisition system, and this article applies numerical analysis methods to calculate the spherical harmonic coefficients of the magnetic field using discrete test data, providing a feasible method for the production and testing of gradient coils.
Magnetic Resonance Imaging/methods* ; Magnetic Fields ; Electromagnetic Fields ; Equipment Design

This study investigated a novel coronary knobby scoring balloon through finite element analysis (FEA) and in vitro anti-slippage testing, evaluating its dilation process under various vascular conditions and comparing it with other balloons. The FEA results indicated that in the cases of healthy artery and diseased artery with different stenosis rates, the stress on the vessels caused by the knobby scoring balloon was significantly smaller than that of the scoring balloon, and was close to that of the plain balloon. In vitro anti-slippage testing showed that the slippage distance of a plain balloon was 0.11±0.06 mm, and there was no slippage for knobby scoring balloon under nominal pressure. Knobby scoring balloon can effectively expand calcified lesion while providing anti-slippage function, and has a lower risk of vascular injury.
Finite Element Analysis ; Humans ; Angioplasty, Balloon, Coronary/instrumentation* ; Equipment Design ; Biomechanical Phenomena ; Coronary Vessels

In order to improve the effect of transcranial electrical stimulation treatment and realize personalized treatment for patients with varying severity levels, this paper designed an integrated four-channel EEG recording multimodal transcranial electrical stimulation system. This system can conduct real-time monitoring on EEG and related characteristic analysis before stimulation, in stimulation, and after stimulation. This enables physicians and researchers to resolve real-time brain states, evaluate transcranial electrical stimulation effect, and then artificially adjust the stimulation parameters. After relevant testing and verification, the system can select four stimulation modes: TACS, TDCS, TPCS and TRNS, which can output the constant stimulation current of 0.03 mA accuracy in the range of ±2 mA and the stimulation frequency of low frequency of 0~4 kHz (precision of 0.01 Hz) and high frequency 50~100 kHz, which can obtain more accurate EEG signals under stimulation interference, demonstrating a good market application prospect.
Electroencephalography/methods* ; Transcranial Direct Current Stimulation/instrumentation* ; Humans ; Equipment Design