OBJECTIVES: The aim of this study was to compare the anterior and posterior occlusal plane characteristics of patients with different temporomandibular joint osseous statuses. METHODS: A total of 306 patients with initial cone beam CT (CBCT) and cephalograms were included. They were divided into three groups on the basis of their temporomandibular joint osseous status: bilateral normal (BN) group, indeterminate for osteoarthrosis (I) group, and osteoarthrosis (OA) group. The anterior and posterior occlusal planes (AOP and POP) of the different groups were compared. Then, the regression equation was established after adjusting for confounding factors, and a correlation analysis between the occlusion planes and other parameters was performed. RESULTS: SNA, SNB, FMA, SN-MP, Ar-Go, and S-Go were correlated with the occlusal planes. Relative to the BN and I groups, the FH-OP of the OA group increased by 1.67° on the average, FH-POP increased by 1.42° on the average, and FH-AOP increased by 2.05° on the average. CONCLUSIONS The occlusal planes were steeper in the patients with temporomandibular osteoarthrosis than in the patients without it, and the mandible rotated downward and backward. The height of the mandibular ramus, the mandibular body length, and the posterior face height were small. In clinical practice, attention should be given to the potential risk of temporomandibular joint osteoarthrosis in such patients. In addition, SNB, FMA, SN-MP, Ar-Go, S-Go, and occlusal planes had moderate correlations.
Humans ; Dental Occlusion ; Cephalometry ; Mandible ; Temporomandibular Joint Disorders/diagnostic imaging* ; Temporomandibular Joint/diagnostic imaging* ; Osteoarthritis/diagnostic imaging* ; Mandibular Condyle

Occlusal plane (OP) is one of the essential factors affecting craniofacial morphology and function. The OP not only assists in diagnosing malocclusion but also serves as an important reference for making treatment plans. Patients with different types of malocclusions have different forms of OP. Compared with patients with standard skeletal facial type, the occlusal plane of patients with skeletal class Ⅱ and high angle is steeper, while that of patients with skeletal class Ⅲ and low angle is more even. In orthodontic treatment, adjusting and controlling the OP can promote the normal growth and development of the mandible in most patients with malocclusion during the early stage of growth, while causing favorable rotation of the mandible in some adults with mild-to-moderate malocclusion. For moderate-to-severe malocclusion, the OP rotation by orthodontic-orthognathic treatment can achieve better long-term stability. This article reviews the evolution of the definition of OP and its implications for diagnosing and the guiding treatment of malocclusion.
Adult ; Humans ; Dental Occlusion ; Maxilla ; Cephalometry ; Malocclusion/therapy* ; Mandible

Objective: To investigate the influence of light and heavy bite force on the mandibular movement trajectories, and the influence of bite force on virtual occlusal pre-adjustment of digital full crown. Methods: From October 2021 to March 2022, 10 postgraduate volunteers (3 males and 7 females, aged 22-26 years) were recruited from Peking University School and Hospital of Stomatology. Maxillary and mandibular digital models of the participants were obtained by intraoral scanning. Jaw relations were digitally transferred under heavy bite force and mandibular movement trajectories under light and heavy bite force were recorded by jaw motion analyser. Three mandibular markers were chosen, namely the mesial proximal contact point of the central incisor (incisal point) and the mesial buccal cusp tips of the bilateral first molars. The three-dimensional displacements of the markers under two kinds of bite force in the intercuspal position (ICP), the sagittal projection of the three-dimensional displacements in the protrusive edge-to-edge position, and the coronal projection of the three-dimensional displacements in the lateral edge-to-edge position of upper and lower posterior teeth were measured. Single-sample t-test was used to compare the three-dimensional displacements and the corresponding sagittal projection and coronal projection with 0, respectively. The left maxillary central incisor and left mandibular first molar were virtually prepared by the reverse engineering software. Then dental design software was used to design digital full crown using the copy method. The mandibular movement trajectories under light and heavy bite force were separately used to guide virtual occlusal pre-adjustment. The three-dimensional deviations (mean deviations and root mean square) between the lingual surface of the left maxillary central incisor or the occlusal surface of the left mandibular first molar and that of the natural tooth before preparation were calculated (light bite force group and heavy bite force group), and the differences between the two groups were compared by the paired t-test. Results: Under the two kinds of bite force, the three-dimensional displacements of the markers in the ICP were (0.217±0.135), (0.210±0.133) and (0.237±0.101) mm, respectively; the sagittal projection of the three-dimensional displacements of the markers in the protrusive edge-to-edge position were (0.204±0.133), (0.288±0.148) and (0.292±0.136) mm, respectively; the coronal projection of the three-dimensional displacements of the mesial buccal cusp tips of the bilateral first molars in the lateral edge-to-edge position were (0.254±0.140) and (0.295±0.190) mm, respectively. The differences between the above displacements and 0 were statistically significant (P<0.05). The results of occlusal pre-adjustment showed that the mean deviations of the lingual surface of the left maxillary central incisor in the light and heavy bite force groups were (0.215±0.036) and (0.195±0.041) mm (t=3.95, P=0.004), respectively. The mean deviations of the occlusal surface of the left mandibular first molar were (0.144±0.084) and (0.100±0.096) mm (t=0.84, P=0.036), respectively. Conclusions: Both the light and heavy bite force have an influence on the mandibular movement trajectories. Virtual occlusal pre-adjustment of prostheses with mandibular movement trajectories under heavy bite force can obtain morphology of lingual or occlusal surfaces closer to the natural teeth before preparation.
Male ; Female ; Humans ; Bite Force ; Tooth ; Mandible ; Molar ; Occlusal Adjustment

OBJECTIVE: To investigate the efficacy of vertical control by using conventional mini-implant anchorage in maxillary posterior buccal area for Angle class Ⅱ extraction patients. METHODS: Twenty-eight Angle class Ⅱ patients [9 males, 19 females, and age (22.6±2.8) years] were selected in this study. All of these patients were treated by using straight wire appliance with 4 premolars extraction and 2 mini-implant anchorage in maxillary posterior buccal area. In this study, the self-control method was used to measure and analyze the lateral radiographs taken before and after orthodontic treatment in each case, the main cephalometric analysis items were related to vertical changes. The digitized lateral radiographs were imported into Dolphin Imaging Software (version 11.5: Dolphin Imaging and Management Solutions, Chatsworth, California, USA), and marked points were traced. Each marked point was confirmed by two orthodontists. The same orthodontist performed measurement on the lateral radiographs over a period of time. All measurement items were required to be measured 3 times, and the average value was taken as the final measurement result. RESULTS: Analysis of the cephalometric radiographs showed that, for vertical measurements after treatment, the differences of the following measurements were highly statistically significant (P < 0.001): SN-MP decreased by (1.40±1.45) degrees on average, FMA decreased by (1.58±1.32) degrees on average, the back-to-front height ratio (S-Go/N-Me) decreased by 1.42%±1.43% on average, Y-axis angle decreased by (1.03±0.99) degrees on average, face angle increases by (1.37±1.05) degree on average; The following measurements were statistically significant (P < 0.05): the average depression of the upper molars was (0.68±1.40) mm, and the average depression of the upper anterior teeth was (1.07±1.55) mm. The outcomes indicated that there was a certain degree of upper molar depression after the treatment, which produced a certain degree of counterclockwise rotation of the mandibular plane, resulting in a positive effect on the improvement of the profile. CONCLUSION The conventional micro-implant anchorage in maxillary posterior buccal area has a certain vertical control ability, and can give rise to a certain counterclockwise rotation of the mandible, which would improve the profile of Angle Class Ⅱ patients.
Bicuspid ; Cephalometry/methods* ; Female ; Humans ; Male ; Malocclusion, Angle Class II/therapy* ; Mandible ; Maxilla/diagnostic imaging* ; Orthodontic Anchorage Procedures ; Tooth Movement Techniques ; Vertical Dimension

Early orthodontic treatment refers to the orthodontic treatment of dental-maxillofacial deformities in the early deciduous or mixed dentition. More and more attentions has been paid to early orthodontic treatment. Many kinds of orthodontic appliances are emerging on the market with the rapid development of the orthodontic technology. At the same time, problems and increased risks have followed in early orthodontic treatment. The contents of the article include the establishment of deciduous occlusion and the characteristics of the deciduous dentition, the orthodontic principles of different stages of deciduous dentition, the oral bad habits during the deciduous dentition and the risk control of early orthodontic treatment.
Dental Occlusion ; Dentition, Mixed ; Humans ; Malocclusion/therapy* ; Orthodontic Appliances ; Tooth, Deciduous

To evaluate the therapeutic effect of using micro-implant anchorage (MIA) to rotate the functional occlusal plane (FOP) counterclockwise. Forty skeletal class Ⅱ high-angle patients who had completed orthodontic treatment were enrolled, including 20 patients treated with MIA orthodontic system (MIA group) and the other 20 patients treated with traditional sliding straight wire appliance (control group). Cephalometric measurements on the lateral cranial radiographs before and after treatment were performed, all acquired data were statistically analyzed with SPSS 26.0. At the end of treatment, MIA group obtained better effect of FOP and mandibular plane counter-clockwise rotation than the control group. In the MIA group, the average change of FOP-frankfort horizontal plane (FH), FOP-SN and mandibular plane angle (MP-FH) angle was -4.5(-7.3, -3.7)°, (3.3)° and -1.7(-3.0, -0.9)°, respectively. In the control group, the average change of FOP-FH, FOP-SN and MP-FH angle was -0.1(-4.1, 3.0)°, (-0.1±5.1)° and -0.4(-2.4, 0.7)°, respectively. There was significant difference between the change of the two groups (all <0.05). Compared with the traditional sliding straight wire appliance, counterclockwise rotation of FOP can be more effectively reversed by using MIA orthodontic system, and the MP-FH can be reduced as well.
Cephalometry ; Dental Occlusion ; Humans ; Malocclusion, Angle Class II/therapy* ; Mandible ; Maxilla ; Treatment Outcome

A 19-year-old female patient came with the chief complaint that the upper anterior teeth looked small and with many spaces. The patient claimed that the tooth had never been replaced since birth. The patient wanted to improve the aesthetics of the tooth. Treatment, in this case, was made using a fixed prosthetic to aesthetically rehabilitate through prosthodontic treatment in the anterior teeth agenesis followed by attrition. It can be concluded that fixed prosthodontic treatment using a splint bridge is one treatment option that can be used in multiple anterior teeth agenesis followed by tooth wear. An appropriate material selection increases the aesthetics and functional aspects of the final treatment.
Denture, Partial, Fixed ; Anodontia ; Dental Occlusion ; Humans ; Health

OBJECTIVE: This study aims to investigate the occlusal and myoelectric characteristics of implant-supported fixed denture in the mandibular region and provide reference for the design of fixed restoration. METHODS: Sixty edentulous patients with implant-supported fixed denture were selected and divided into three groups: group A, 20 cases with implant-supported fixed restoration in the maxillary region; group B, 20 cases with natural dentition, and group C, 20 cases with removable partial denture. The T-scan 8.0 digital occlusion analysis system was used to evaluate the occlusal characteristics of patients in the three groups at intercuspal, protrusion, and left and right lateral positions. Electromyography was used to analyze the myoelectric amplitude and bilateral asymmetry index of the anterior temporalis and masseter of the three groups in different states such as resting and clenching. The relationship between occlusion and myoelectricity was also investigated. RESULTS: In the occlusion analysis by T-scan, the occlusion time, the balance of left and right bite force, the left and right asymmetry of the occlusion center, the trajectory of central occlusion force, and the disclusion time were higher in group C than in groups A and B (P<0.05). No significant differences were observed in the anterior and posterior asymmetry of the occlusion center and percentage of bite force at anterior region among the three groups. In the analysis of myoelectricity, the myoelectric amplitude at resting state and the asymmetry index of masticatory muscles in group C were higher than those in groups A and B (P<0.05). The myoelectric amplitude during clenching in groups A and B groups was higher than that in group C (P<0.05). CONCLUSIONS In implant-supported fixed restoration at edentulous mandibular, when maxillary includes the removable partial denture, degree of occlusal instability and left and right asymmetry of occlusion center are greater than those with the natural dentition and implant-supported fixed denture at maxillary. The myoelectricity is closely related to occlusion. The removable partial denture can increase the myoelectric activity and reduce the potential of the masticatory muscle. The asymmetry of bilateral myoelectricity is related to the occlusion imbalance.
Bite Force ; Dental Implants ; Dental Prosthesis, Implant-Supported ; Humans ; Mandible ; Masticatory Muscles

With the evolution of the computer-aided design/computer-aided manufacturing (CAD/CAM) technology, the intraoral scanners are playing an increasingly important role, as they are the first step towards a completely digital workflow. The CAD/CAM double scanning technique has been used to transfer the information from provisional restorations to definitive restorations. In this case, a 67-year-old male with esthetically compromised anterior teeth, generalized severe attrition of teeth, and reduced vertical dimension was treated with full mouth rehabilitation including a re-establishment of the lost vertical dimension of occlusion assisted by the crown lengthening procedure. The provisional restorations were fabricated using an intraoral scanner and the CAD/CAM double scanning technique. After the period of adaption, the definitive monolithic zirconia restorations were delivered. The CAD/CAM double scanning technique successfully transferred the occlusal and morphological characteristics, obtained from the provisional restorations, to the definitive restorations.
Aged ; Crown Lengthening ; Dentition ; Humans ; Male ; Mouth Rehabilitation ; Mouth ; Tooth ; Tooth Wear ; Vertical Dimension

The loss of posterior support and the abnormal jaw relation can cause pathologic findings. If deep bite patients with multiple missing teeth, can not have the stable posterior contact, the mandible moves posteriorly, and consequently the overjet and overbite get worse. And when the mandibular irregular occlusal plane is corrected, it is easier to have the bilateral balanced occlusion with the maxilla. So the treatment goal is to give proper posetrior support and establish appropriate anterior guidance, and ultimately provide improved mastication and esthetics recovery. In this case, a 68 year old man, having deep bite without posterior support was evaluated by the vertical dimesion decision flow-chart. An available prosthetic height, anterior occlusal relation such as overjet, overbite and the esthetic part such as facial height and the cephalometric analysis are the factors to be considered.
Dental Occlusion ; Esthetics ; Humans ; Jaw ; Mandible ; Mastication ; Maxilla ; Mouth Rehabilitation ; Mouth ; Overbite ; Tooth ; Vertical Dimension