OBJECTIVES: This study aims to explore the effect of improving clinical efficiency by replacing traditional impression workflow with centralized digital impression workflow. METHODS: The department of prosthodontics in Center of Stomatology, Peking University Shenzhen Hospital has improved the clinical workflow by replacing the traditional impression made by doctors using impression materials for each patient with a centralized digital impression made by one technician for all patients in the department. This cross-sectional study recorded the chairside time required for impression taking in patients undergoing single posterior zirconia full crown restoration before clinical process improvement; the time required for centralized digital impression production; the comfort level of patients; and the adjacency relationship, occlusal contact relationship, and time required for prostheses adjusting (i.e., whether centralized digital impressions would compromise the quality of pro-stheses and increase the time of prostheses adjusting). RESULTS: The average time to make a traditional impression was (9.98±1.41) min, and the average time required for each patient to make a centralized digital impression was (5.98±1.49) min, which was shorter than that to used make a traditional impression (P<0.05). Centralized digital impression made patients feel more comfortable compared with traditional impression (P<0.05). The adjacency relationship of restorations by centralized digital impression was more appropriate (P<0.05), and no significant difference in occlusal relationship was found (P>0.05). The time required for adjusting prostheses also had no significant differences (P>0.05). CONCLUSIONS Centralized digital impression can improve clinical efficiency for patients undergoing single posterior zirconia crown restoration. The time for impression taking is shorter, and patients feel more comfortable without compromising the quality of the prostheses.
Humans ; Cross-Sectional Studies ; Dental Impression Technique ; Crowns ; Zirconium ; Workflow ; Computer-Aided Design ; Time Factors ; Dental Impression Materials

OBJECTIVES: This study aims to use 3D prin-ting technology based on the principle of stereo lithography apparatus (SLA) to shape dental lithium disilicate ceramics and study the effects of different slurry proportions on the microstructure and properties of heat-treated samples. METHODS: The experimental group comprised lithium disilicate ceramics manufactured through SLA 3D printing, and the control group comprised lithium disilicate ceramics (IPS e.max CAD) fabricated through commercial milling. An array of different particle sizes of lithium disilicate ceramic powder materials (nano and micron) was selected for mixing with photocurable acrylate resin. The proportion of experimental raw materials was adjusted to prepare five groups of ceramic slurries for 3D printing (Groups S1-S5) on the basis of rheological properties, stability, and other factors. Printing, debonding, and sintering were conducted on the experimental group with the optimal ratio, followed by measurements of microstructure, crystallographic information, shrinkage, and mechanical properties. RESULTS: Five groups of lithium disilicate ceramic slurries were prepared, of which two groups with high solid content (75%) (Groups S2 and S3) were selected for 3D printing. X-ray diffraction and scanning electron microscopy results showed that lithium disilicate was the main crystalline phase in Groups S2 and S3, and its microstructure was slender, uniform, and compact. The average grain sizes of Groups S2 and S3 were (559.79±84.58) nm and (388.26±61.49) nm, respectively (P<0.05). Energy spectroscopy revealed that the samples in the two groups contained a high proportion of Si and O elements. After heat treatment, the shrinkage rate of the two groups of ceramic samples was 18.00%-20.71%. Test results revealed no statistical difference in all mechanical properties between Groups S2 and S3 (P>0.05). The flexural strengths of Groups S2 and S3 were (231.79±21.71) MPa and (214.86±46.64) MPa, respectively, which were lower than that of the IPS e.max CAD group (P<0.05). The elasticity modulus of Groups S2 and S3 were (87.40±12.99) GPa and (92.87±19.76) GPa, respectively, which did not significantly differ from that of the IPS e.max CAD group (P>0.05). The Vickers hardness values of Groups S2 and S3 were (6.53±0.19) GPa and (6.25±0.12) GPa, respectively, which were higher than that of the IPS e.max CAD group (P<0.05). The fracture toughness values of Groups S2 and S3 were (1.57±0.28) MPa·m^0.5 and (1.38±0.17) MPa·m^0.5, respectively, which did not significantly differ from that of the IPS e.max CAD group (P>0.05). CONCLUSIONS The combination of lithium disilicate ceramic powders with different particle sizes can yield a slurry with high solid content (75%) and suitable viscosity and stability. The dental lithium disilicate ceramic material is successfully prepared by using 3D printing technology. The 3D-printed samples show a small shrinkage rate after heat treatment. Their microstructure conforms to the crystal phase of lithium disilicate ceramics, and their mechanical properties are close to those of milled lithium disilicate ceramics.
Printing, Three-Dimensional ; Dental Porcelain/chemistry* ; Ceramics/chemistry* ; Materials Testing ; Particle Size

Achieving precise restoration of tooth function and personalized restoration of natural tooth esthetics has always been a significant challenge in direct restorative dentistry. The traditional direct restorative techniques are limited by the subjective operations of dentists, resulting in high technical sensitivity, long operation time, and unpredictable restoration results, making it difficult to meet patients' personalized demands for restoration outcomes. An innovative flowable resin injection technique was introduced in this study. By combining digital design with personalized restoration guides, this technique achieves precise and personalized tooth restoration, thus revolutionizing the traditio-nal paradigm of direct tooth restoration. Specifically, this technique is guided by the patient's subjective aesthetic needs. It utilizes digital technology to pre-design the restoration result and creates a personalized restoration guide. During clinical operation, the dentist needs to only precisely inject the flowable resin into the guide, allowing for rapid completion of the restoration, thereby significantly reducing the operation time and improving the precision and predictability of the restoration. The perfect combination of digital design and flowable resin injection not only significantly improves the precision and predictability of direct tooth restoration but also remarkably shortens the clinical operation time and reduces the requirements for the dentist's technical level, making it widely applicable to the restoration of various tooth defects. Thus, it improves patient satisfaction and reduces the workload of dentists. This innovative restoration technique is expected to become a new productive force in future clinical direct adhesive restorations.
Humans ; Dental Restoration, Permanent/methods* ; Esthetics, Dental ; Composite Resins ; Computer-Aided Design ; Injections

Occlusal rehabilitation is an effective means of treating tooth wear, edentulous jaws and other oral diseases. Among them, full-mouth fixed occlusal reconstruction can effectively restore aesthetics and function, but the complexity of the clinical process, the high sensitivity of the technique, and the high incidence of various complications have always drawn much attention. With the application and development of digital technology in occlusal rehabilitation, the treatment outcome has been improved compared with traditional treatment. However, there are many kinds of digital technology with different efficacy, how to build an efficiently standardized digital clinical technical solution is a current difficulty. Therefore, combined with the long-term work of the department of prosthodontics in our hospital, in this paper, the minimum (occlusal perception of thickness) and maximum (centric relation) geometric quantities which should be paid attention to during reconstruction are put forward. We systematically organized the clinical procedure of digital full-mouth fixed occlusal rehabilitation used in our department for a long time. In conclusion, a 5-stage 19-step or n-step solution (5-19N for short) characterized by "from large to small" restorative space splitting logic is proposed. It has a certain reference value for the future use of digital technology to deal with complex occlusal rehabilitation cases.
Humans ; Dental Occlusion ; Computer-Aided Design ; Mouth, Edentulous/rehabilitation*

OBJECTIVES: To evaluate the osteogenic efficacy of three-dimensional printing individualized titanium mesh (3D-PITM) as a scaffold material in guided bone regeneration (GBR). METHODS: 1) Patients undergoing GBR for alveolar bone defects were enrolled as study subjects, and postoperative healing complications were recorded. 2) Postoperative cone beam computed tomography (CBCT) scans acquired at least 6 months post-surgery were used to calculate the percentage of actual bone formation volume. 3) Alveolar bone specimens were collected during the first-stage implant surgery for histomorphometric analysis. This analysis quantitatively measured the proportions of newly formed bone and newly formed unmineralized bone within the specimens. Specimens were categorized into three groups based on healing complications (good healing group, wound dehiscence group, 3D-PITM exposure group) to compare differences in the proportions of newly formed bone and newly formed unmineralized bone. RESULTS: 1) Twelve patients were included. Guided bone regeneration failed in one patient, and 3D-PITM exposure occurred in three patients (exposure rate: 25%). 2) The mean percentage of actual bone formation volume in the 11 successful guided bone regeneration cases was 95.23%±28.85%. 3) Histomorphometric analysis revealed that newly formed bone constituted 40.35% of the alveolar bone specimens, with newly formed unmineralized bone accounting for 13.84% of the newly formed bone. Intergroup comparisons showed no statistically significant differences (P>0.05) in the proportions of newly formed bone or newly formed unmineralized bone between the good healing group and the wound dehiscence group or the 3D-PITM exposure group. CONCLUSIONS 3D-PITM enables effective bone augmentation. Radiographic assessment demonstrated favorable bone formation volume, while histological analysis confirmed substantial formation of newly formed mineralized bone within the surgical site.
Humans ; Printing, Three-Dimensional ; Titanium ; Cone-Beam Computed Tomography ; Bone Regeneration ; Osteogenesis ; Surgical Mesh ; Tissue Scaffolds ; Alveolar Process/surgery* ; Adult ; Male ; Middle Aged ; Female ; Wound Healing ; Guided Tissue Regeneration, Periodontal/methods* ; Alveolar Bone Loss/surgery*

This study explored a novel digital design and fabrication method for a double constrained split orthodontic miniscrew guide to improve the accuracy and safety of clinical miniscrew implantation and reduce related complications. A patient requiring miniscrew implantation was selected, and data were acquired using cone beam computed tomography (CBCT) and intraoral optical scanning. For the construction of a double constrained split guide including a screw-hole guide and an insertion rod guide, different types of software such as Mimics 24.0, Geomagic wrap 2021, and Materialise magics 21.0 were utilized for 3D reconstruction, model integration, and guide design. The guide was then fabricated via laser metal 3D printing. Model and intraoral try-in results demonstrated that the guide fitted well and was stable. Postoperative CBCT verified that the final miniscrew implantation site was consistent with the preoperative design, and no related complications occurred. This double constrained split orthodontic miniscrew guide provides a precise and safe digital solution for clinical miniscrew implantation.
Humans ; Bone Screws ; Cone-Beam Computed Tomography ; Printing, Three-Dimensional ; Orthodontic Anchorage Procedures/instrumentation* ; Imaging, Three-Dimensional ; Computer-Aided Design

OBJECTIVES: This study aimed to investigate the influence of the dimensional stability of 3D printed resin master model on the replication accuracy of implant replicas. METHODS: Ten digital impressions of patients undergoing continuous crowns or fixed bridge restoration supported by two implants were obtained, and resin models with implant replicas were 3D printed. Scanning rods were fixed on the replicas 3, 7, and 14 days after printing. The 3D, linear, and angular deviations of the scanning rods at different times were analyzed through Geomagic Wrap 2021 software. RESULTS: The position of the replicas shifted mesiolingually, in the same direction as the shrinkage of the model. From day 7 onward, the 3D, distance linear, and angular deviations of the replicas (scanning rod) significantly increased compared with those on the 3rd day (P<0.05). On the 14th day, the changes were even more pronounced, with the above deviations showing statistical significance (P<0.05) compared with those for the 3-day and 7-day groups. No statistical difference in height linear deviation was observed among the groups. CONCLUSIONS The insufficient dimensional stability of 3D printed resin models can lead to changes in the relative position and angle of the replicas, thereby affecting the accuracy of the replicas in recreating the implant's position. Complete manufacturing of prosthesis is recommended within 7 days after the model is printed.
Printing, Three-Dimensional ; Humans ; Dental Implants ; Models, Dental ; Dental Impression Technique ; Crowns

Compared with conventional transdermal drug delivery systems, dissolving microneedles significantly enhance drug bioavailability by penetrating the stratum corneum barrier and achieving intradermal drug delivery. In order to improve the transdermal bioavailability of dexmedetomidine hydrochloride, in this study, a novel microneedle delivery system was developed for dexmedetomidine hydrochloride based on 3D printing combined with micro-molding. By systematically optimizing the microneedle geometrical parameters, array arrangement, and preparation process parameters, we determined the optimal ratio of drug-carrying matrix as 15% PVP (polyvinyl pyrrolidone) K90. The microneedles exhibited significant drug loading gradients, with mean content of (209.99±27.56) μg/patch, (405.31±30.31) μg/patch, and (621.61±34.43) μg/patch. They showed a regular pyramidal structure under SEM and handheld electron microscopy, and their mechanical strength allowed effective penetration into the stratum corneum. The surface contact angles were all < 90°, indicating excellent hydrophilicity. The microneedles dissolved completely within 10 min after skin insertion, achieving a cumulative release rate of 90% (Higuchi model, r=0.996) during 2 hours of in vitro transdermal permeation. The cytotoxicity test and hemolysis test verified good biocompatibility. Pharmacodynamic evaluation showed that the microneedle group demonstrated pain-relieving effect within 15 min, with the pain threshold at the time point of 60 min being 3 times that in the transdermal cream group. The microneedle system developed in this study not only offers an efficient drug delivery option for patients but also establishes an innovative platform for rapid percutaneous delivery of hydrophilic drugs, demonstrating significant potential in perioperative pain management.
Dexmedetomidine/pharmacokinetics* ; Printing, Three-Dimensional ; Needles ; Drug Delivery Systems/methods* ; Administration, Cutaneous ; Animals ; Microinjections/instrumentation* ; Skin Absorption ; Skin/metabolism*

OBJECTIVE: To review the research progress of three-dimensional (3D) bioprinting technology for wound dressing design and preparation. METHODS: The literature on 3D bioprinted wound dressings in recent years, both domestically and internationally, was retrieved. The core principles of 3D bioprinting technology, mainstream methods, and their applications in wound dressings design and preparation were summarized. RESULTS: By leveraging precise spatial manipulation capabilities and multi-material integration, 3D bioprinting technology constructs the functionalized wound dressings with complex structures and bioactivity. These dressings primarily function across several dimensions: wound hemostasis, infection control, controlled drug release, and monitoring wound healing. CONCLUSION Although 3D bioprinted wound dressings can promote wound healing through multiple dimensions, large-scale clinical validation is still lacking. Future efforts should further clarify their clinical value and scope of application to provide more efficient, precise, and patient-comfortable treatment options for refractory wounds .
Humans ; Wound Healing ; Printing, Three-Dimensional ; Bioprinting/methods* ; Bandages ; Tissue Engineering/methods* ; Tissue Scaffolds ; Biocompatible Materials

OBJECTIVE: To investigate the effectiveness of three-dimentional (3D) printed personalized guide plate-assisted wrist arthroscopic repair for Palmer type ⅠB triangular fibrocartilage complex (TFCC) injury. METHODS: A retrospective analysis was conducted on the clinical data of 20 patients with Palmer type ⅠB TFCC injuries admitted between January 2023 and March 2024 who met the selection criteria. Among them, 13 were male and 7 were female; ages ranged from 23 to 35 years, with a mean age of 30.3 years. All patients had a history of trauma, 12 cases involved falls and 8 cases involved sprains. All patients demonstrated a positive "piano key sign". MRI revealed deep ulnar-side tears of the TFCC. Conservative treatment for 6 weeks yielded poor or no clinical improvement. The interval from injury to surgery ranged from 2 to 9 months, with a mean of 5.0 months. Patients underwent wrist arthroscopic repair assisted by 3D printed personalized guide plate. Functional recovery was assessed preoperatively and postoperatively using the visual analogue scale (VAS) score for pain, modified Mayo wrist score, and range of motion (ROM) measurements for wrist flexion-extension, ulnar-radial deviation, and pronation-supination. At last follow-up, MRI was performed to evaluate the healing of TFCC. RESULTS: All 20 patients underwent successful surgery without complications such as vascular or nerve injury, fracture, incisional infection, or joint stiffness. All patients were followed up 9-18 months (mean, 12.4 months). At last follow-up, patients demonstrated significant improvements in VAS scores, modified Mayo wrist scores, wrist flexion-extension ROM, ulnar-radial deviation ROM, and pronation-supination ROM compared to preoperative levels ( P<0.05). MRI at last follow-up showed preserved TFCC continuity, excellent healing, and secure fixation. CONCLUSION 3D-printed personalized guide plate significantly improve outcomes in wrist arthroscopic TFCC repair for Palmer type ⅠB injuries. They enable high-quality suturing, facilitate anatomical reconstruction, and markedly enhance wrist function.
Humans ; Arthroscopy/methods* ; Male ; Adult ; Triangular Fibrocartilage/diagnostic imaging* ; Female ; Retrospective Studies ; Printing, Three-Dimensional ; Wrist Injuries/diagnostic imaging* ; Young Adult ; Bone Plates ; Treatment Outcome ; Wrist Joint/surgery* ; Magnetic Resonance Imaging ; Range of Motion, Articular