Objective:To analyze the learning curve of TiRobot-assisted lumbar pedicle screw fixation (LPSF) by cumulative sum (CUSUM) test method.Methods:The clinical data of 50 patients who underwent TiRobot-assisted LPSF from January 2020 to December 2022 in Beijing Friendship Hospital, Capital Medical University were retrospectively analyzed. CUSUM analysis and learning curve fitting were performed with robot usage time as the main indicator with the time for each step refined (robot registration time, path planning time and guide wire placement time), to select the best learning curve fitting model with the R2 value closest to 1. Using the turning point of the learning curve as the boundary, the learning curve was divided into two stages as learning stage and maturity stage, and then the observation indexes were compared between the two stages. Results:All 50 patients successfully completed the surgery without perioperative complications, with a total of 244 pedicle screws implanted. The total robot usage time and robot registration time showed a gradually decreasing trend with the increase of case number, and the learning curves were successfully fitted and reached their peaks at the seventeenth and thirteenth cases respectively. The entire learning process was divided into learning stage (17 cases) and maturity stage (33 cases) based on the turning point of the learning curve of total robot usage time. The path planning time and guide wire placement time did not show significant changes with the increase in the case number. The total robot usage time, robot registration time and the intraoperative blood loss in the learning stage were significantly higher than those in the maturity stage: (35.35 ± 1.58) min vs. (30.61 ± 0.43) min, (20.83 ± 1.56) min vs. (14.94 ± 0.29) min and 400 (150, 500) ml vs. 200 (110, 300) ml, the guide wire placement time of per screw was significantly lower than that in the maturity stage: 2.00 (1.83, 2.34) min/screw vs. 2.33 (2.13, 2.69) min/screw, and there were statistical differences ( P<0.05 or <0.01). There were no statistical difference in the path planning time, path planning time of per screw, guide wire placement time and the accuracy of screw placement between two stages ( P>0.05). Conclusions:TiRobot-assisted LPSF is a new technology with safety and effectiveness, and it has a relatively short learning curve. To achieve technological maturity, at least 17 surgeries are required with accumulated experience, and the robot registration is the main step of the learning process. After reaching maturity stage, the robot usage time is significantly shortened and intraoperative trauma is significantly reduced while the relatively high screw placement accuracy is ensured.

Aim To explore the material basis and un-derlying mechanism of Qingre Huoxue Formula(QRHXF)in the treatment of non-small cell lung cancer(NSCLC)by applying network pharmacology,molecular docking technology and bioinformatics com-bined with animal experiments.Methods TCMSP,ECTM,and BATMAN databases were used to obtain active components and corresponding targets of QRHXF;GEO and DisGeNENT databases were con-ducted to acquire NSCLC-associated differential expres-sion genes.By intersecting them,the common targets were obtained.It was chosen to construct a herb-com-ponent-disease network and protein-protein interaction(PPI)network.Furthermore,DAVID database was used to perform gene ontology(GO)function and Kyo-to encyclopedia of genes and genomes(KEGG)path-way enrichment analyses.The molecular docking was presented by adopting Autodock Vina program to verify key targets.RNA-seq datawere downloaded from TC-GA database to obtain differential gene expression.Ka-planMeier(KM)analysis was performed to analyze the relationship between gene expression and overall sur-vival.Mouse subcutaneous tumor model of LLC was established.The effects of QRHXF on body weight,tumor volume and weight were monitored for pharmaco-dynamic analysis.Tumor tissues slides were stained with hematoxylin and eosin(HE)for histopathological examination.Immunohistochemistry(IHC)staining was employed for detecting Ki67 and EP300.Western blot was performed to measure the protein expression of TP53,CDK1 and NTRK1.Results The results of net-work pharmacology showed that a total of seven com-mon targets were screened from NSCLC and QRHXF,and the effect of QRHXF on anti-NSCLC may occur via multiple signaling pathways,including cell cycle.The results of molecular docking indicated that the main ac-tive components of QRHXF had low binding energy and stable docking conformation with the molecular target for treating NSCLC.According to bioinformatic analy-sis,there were significant differences in BRCA1,CDK1 and NTRK1 mRNA expression between tumor tissues and normal tissues,which were also prognostic factors for overall survival.Animal experimental research showed QRHXF inhibited subcutaneous tumor growth(P＜0.01)and improved the quality of life in mice with NSCLC.After QRHXF intervention,the density of tumor cells was significantly reduced,and necrotic are-as were increased.The expressions of Ki67 and EP300 were significantly decreased.Compared with the model group,Western blot showed up-regulation of TP53 and NTRKA(P＜0.05),whereas CDK1 were down-regu-lated(P＜0.05).Conclusion QRHXF exerted anti-NSCLC effects by regulating NTRK1,EP300,TP53,CDK1 and inducing cell cycle,cell cycle arrest and in-hibiting tumor growth,metastasis and angiogenesis.

Aim To investigate the protective effects of resveratrol(RSV)on hypoxia/reoxygenation(H/R)-induced apoptosis in H9c2 cardiomyocytes and the un-derlying mechanisms.Methods A model of H/R was established in H9c2 cardiomyocytes.Cell apoptosis was determined by flow cytometry.The expressions of Bax,Bcl-2,cleaved caspase-3 and JAK2/STAT3 signa-ling pathway proteins were detected by Western blot.The inhibitor of JAK2,AG490,was used to assess the effect of RSV on H/R-induced apoptosis in H9c2 car-diomyocytes after inhibiting JAK2/STAT3 signaling pathway.Results RSV could effectively inhibit H/R-provoked cell apoptosis in H9c2 cardiomyocytes and increase the expression of p-JAK2 and p-STAT3.After AG490 intervention,the anti-apoptotic effect of RSV on H9c2 cardiomyocytes caused by H/R was significantly counteracted.Conclusions RSV can inhibit H/R-in-duced apoptosis in H9c2 cardiomyocytes through the activation of JAK2/STAT3 signaling pathway.

Body weight abnormalities, including overweight, obesity, and underweight, have become a dual public health challenge in Chinese adults: overweight and obesity lead to a variety of chronic complications, while underweight increases the risks of malnutrition, sarcopenia, and organ dysfunction. To systematically address these issues, multidisciplinary experts in endocrinology, sports science, nutrition, and psychiatry from various regions have held multiple weight management seminars. Based on the latest epidemiological data and clinical evidence, they expanded the guideline to include assessment and intervention strategies for underweight, in addition to the core content of obesity management. This guideline outlines the etiological mechanisms, evaluation methods, and multidimensional management strategies for overweight and obesity, covering key areas such as diagnosis and assessment, medical nutrition therapy, exercise prescription, pharmacological intervention, and psychological support. It is intended to provide a scientific and standardized approach to weight management across the adult population, aiming to curb the rising prevalence of obesity, mitigate complications associated with abnormal body weight, and improve nutritional status and overall quality of life.

Metal-organic frameworks(MOFs)are porous materials composed of metal ions or metal clusters and organic ligands by coordination,which have the advantages of large specific surface area,good thermal stability and adjustable pore size,and have a promising application in gas chromatographic separation.In recent years,MOFs materials have been used as stationary phases for gas chromatography mainly including ZIF,MIL,UiO-66,HKUST-1,IRMOFs,etc.Based on the molecular sieve effect,van der Waals forces,hydrogen bonding and π-π interactions,the pore size,pore microenvironment,unsaturated metal site and special functional group of the MOFs stationary phase materials can be specifically designed and regulated.MOFs materials as stationary phases have unique separation performance for n-alkanes and their isomers,aromatic compounds and their isomers,alcohols/ketones/aldehydes and their isomers,and chiral compounds.The combination of organic polymers and novel nanomaterials with MOFs materials can improve the separation performance and stability of MOFs.Therefore,MOFs materials are expected to be the promising stationary phase that can be applied to gas separation in complex environments.In this article,the research advances of various stationary phases based on MOFs for gas chromatography in recent years were reviewed.The separation performance and separation mechanism of MOFs stationary phases for mixed gas samples were discussed,and the development trends in the future were prospected.

In this study,an ON/OFF type micro-valve with a sandwich(glass-silicon-glass)structure was designed and fabricated based on the micro-electro-mechanical system(MEMS)technique.The deformable membrane of this micro-valve was prepared on the silicon on insulator(SOI)substrate and sealed using Si-Si bonding and anodic bonding methods.The micro-valve had high-temperature stability and was suitable for integration with other gas chromatography components.The deformable membrane with a thickness of 10 μm was processed on the top silicon of the SOI substrate.The flow control of the micro-valve could be achieved by changing the driving pressure applied to the deformable membrane to deform it.Compared with polymer membranes,the deformable membrane prepared on the top layer silicon of SOI had better temperature stability and could be released using the deep reactive ion etching technique after silicon-silicon bonding,avoiding deformation during the preparation process.In addition,due to the small gap between the membrane and the inlet/outlet holes,the dead volume of the microvalve was very small.The test results indicated that the micro-valve achieved flow control and ON/OFF functions with good repeatability.

A monolithic integrated gas chromatography chip,consisting of a micro gas chromatography column(μGCC)and a micro helium discharge ionization detector(μHDID)was proposed.The chip was fabricated using micro electromechanical system(MEMS)technique,and its sensitivity was improved from two aspects.On one hand,open tubular column was selected as the separation device,and the auxiliary helium channel width of μHDID was modulated based on the microchannel width of the μGCC to match the flow rates of μHDID and μGCC.On the other hand,the electrode structure inside the μHDID collection zone was optimized,a bias electrode group around the collection electrode was constructed,and the ion collection efficiency was improved.After coating HKUST-1 as the stationary phase,the monolithic integrated gas chromatography chip could achieve baseline separation and detection of light hydrocarbon gas mixture(methane,ethane,propane,andn-butane),with a detection limit for propane as low as 25 pg.The chip could carried out test under temperature-programmed conditions,with a resolution of 9.24 for ethane and propane.

A micro gas chromatographic column with mesoporous surface micro column array prepared by anodization method was proposed.A porous support layer with a characteristic pore size of about 30 nm inside the chromatographic column was prepared in situ using anodization method,and a uniform alumina stationary phase was deposited on the mesoporous support layer using atom layer deposition(ALD)technique.The existence of a mesoporous support layer increased surface area of the chromatographic column,thereby increasing the total amount of stationary phase loading and enhancing column capacity,which facilitated chromatographic separation.The test results showed that the porous support layer significantly reduced the longitudinal molecular diffusion and mass transfer resistance of the micro gas chromatographic column,and significantly increased the number of theoretical plates(n-nonane increased by 290.2%).Furthermore,column efficiency of the chromatographic column was less affected by flow rate,which was conducive to rapid separation of heavy hydrocarbon mixtures.

Objective:To analyze the reoperation rate and causes during the early adoption phase of unilateral biportal endoscopy (UBE).Methods:The clinical data of 180 patients who underwent UBE performed by a single surgeon at Beijing Friendship Hospital, Capital Medical University from October 2021 to June 2023 were retrospectively analyzed. Clinical and imaging data of patients who underwent reoperation were collected to analyze the causes of reoperation, and the clinical efficacy of the reoperations was also followed up. Measurement data were expressed as mean ± standard deviation ( ± s), and t-test was used before and after treatment. Results:A total of 180 patients who underwent UBE were included in this study, of which 6 patients underwent reoperation, and the reoperation rate was 3.33%. Among them, 3 cases occurred in the first 90 surgeries and the other 3 occurred in the subsequent 90 surgeries. The causes of reoperation were as follows: recurrent lumbar disc herniation at the same segment postoperatively in 2 cases, insufficient decompression in 2 cases, disc herniation following isolated decompression in 1 case, and immediate postoperative perianal numbness in 1 case. The time between the initial surgery and reoperation ranged from 0 to 187 days, with an average of 63.3 days. The average follow-up time after reoperation was 18.3 months. The visual analogue scale (VAS) and Oswestry disability index (ODI) scores of the patients at the last follow-up were significantly improved compared with those before operation (VAS score of low back pain: 5.2 ± 1.7 before operation, 1.2 ± 0.8 at the last follow-up, P<0.001; VAS score of leg pain: 7.2 ± 1.5 before operation, 1.2 ± 1.2 at the last follow-up, P<0.001; ODI score: 67.3 ± 5.7 before operation, 20.2 ± 8.2 at the last follow-up, P<0.001). The postoperative modified MacNab scores were generally satisfactory (4 cases were rated as excellent, accounting for 66.7%; 2 cases were rated as good, accounting for 33.3%). Except for one patient who experienced dural injury during open revision surgery, there were no serious complications such as nerve damage. Conclusions:In the early stages of UBE surgery, recurrent lumbar disc herniation and inadequate decompression are the primary reasons for reoperation, typically occurring within the first three months postoperatively. Reoperation does not significantly increase the risk of nerve injury. Enhanced early postoperative follow-up is recommended. For symptomatic patients, a second surgery with thorough decompression can yield satisfactory treatment outcomes.

Guidelines for Digital Ancient Books of TCM Indexing(T/CIATCM 119-2024)is based on the theoretical knowledge,disciplinary methods,and practical applications of TCM classical cataloging.Taking digital ancient books of TCM as the object,it systematically reveals the content of TCM knowledge,which is an essential indexing processing standard for building an intelligent retrieval system for TCM ancient books,and can provide support for the deep development and innovative utilization of TCM knowledge.It can not only promote the co-construction and sharing of ancient book resources in the TCM industry,but also promote the standardization construction and application of TCM information.This standard specifies the principles,methods,and examples of free indexing of digital ancient books of TCM based on their original content.It is applicable to the indexing and processing of digital ancient books of TCM for TCM professional libraries and related institutions,and to the data processing and construction of various types of TCM ancient book databases.